A | |
| abort_and_propagate_error [Netamqp_endpoint] |
The endpoint is aborted and set to the
`Error state.
|
| ack_e [Netamqp_basic] | |
| ack_s [Netamqp_basic] |
Acknowledges the delivery of the message identified by
delivery_tag.
|
| amq_direct [Netamqp_exchange] | |
| amq_fanout [Netamqp_exchange] | |
| amq_match [Netamqp_exchange] |
The four standard exchanges.
|
| amq_topic [Netamqp_exchange] | |
| announce_e [Netamqp_endpoint] | |
| announce_s [Netamqp_endpoint] |
Sends the protocol header, and waits until the response arrives.
|
| async_c2s [Netamqp_endpoint] |
Asynchronous calls from the client: This function just
sends the given method to the server.
|
| async_c2s_e [Netamqp_endpoint] | |
| async_c2s_s [Netamqp_endpoint] |
These versions of
async_c2s return first when the message is
passed to the socket.
|
B | |
| bind_e [Netamqp_queue] | |
| bind_s [Netamqp_queue] |
Bind a queue to an exchange, and set the routing key.
|
C | |
| cancel_e [Netamqp_basic] | |
| cancel_s [Netamqp_basic] |
Cancels the consumer identified by
consumer_tag.
|
| clear_output [Netamqp_endpoint] |
Remove any frames from output queues
|
| close_e [Netamqp_channel] |
Closes the channel.
|
| close_e [Netamqp_connection] | |
| close_s [Netamqp_channel] |
Same as synchronous call
|
| close_s [Netamqp_connection] |
Request client side closure.
|
| commit_e [Netamqp_tx] | |
| commit_s [Netamqp_tx] |
Commits the current transaction and starts a new one
|
| configure_sync_timeout [Netamqp_channel] |
Configure the timeout for synchronous request/response methods.
|
| configure_timeout [Netamqp_endpoint] |
Configures the transport-level timeout.
|
| connect [Netamqp_endpoint] |
Triggers the connect to the server.
|
| connection [Netamqp_channel] |
Return the connection the channel uses
|
| consume_e [Netamqp_basic] | |
| consume_s [Netamqp_basic] |
This method asks the server to start a "consumer", which is a
transient request for messages from a specific
queue.
|
| content_method_types [Netamqp_methods_0_9] | |
| create [Netamqp_connection] |
Create the connection management object for the endpoint.
|
| create [Netamqp_endpoint] |
Creates a new endpoint which is initially
`Off.
|
| create_message [Netamqp_basic] |
Creates a new message.
|
| create_method_exception [Netamqp_endpoint] |
Returns a
Method_exception
|
D | |
| declare_e [Netamqp_queue] | |
| declare_e [Netamqp_exchange] | |
| declare_passively_e [Netamqp_queue] | |
| declare_passively_e [Netamqp_exchange] | |
| declare_passively_s [Netamqp_queue] |
Check whether a queue with the given
queue_name exists, and raise
a channel error if not.
|
| declare_passively_s [Netamqp_exchange] |
Check whether an exchange with the given
exchange_name exists,
and raise a channel error if not.
|
| declare_s [Netamqp_queue] |
Declare a new queue: Create it if the queue does not exist yet, or else
check whether the queue exists with the given properties.
|
| declare_s [Netamqp_exchange] |
Declare a new exchange: Create it if the exchange does not exist yet,
or else check whether the exchange exists with the given properties.
|
| decode_header_message [Netamqp_methods_0_9] | |
| decode_longstr [Netamqp_rtypes] | |
| decode_message [Netamqp_methods_0_9] | |
| decode_method_message [Netamqp_methods_0_9] | |
| decode_shortstr [Netamqp_rtypes] | |
| decode_table [Netamqp_rtypes] | |
| default_port [Netamqp_endpoint] |
Default port number for AMQP
|
| delete_e [Netamqp_queue] | |
| delete_e [Netamqp_exchange] | |
| delete_s [Netamqp_queue] |
This function deletes the queue.
|
| delete_s [Netamqp_exchange] |
Delete an exchange.
|
| direct [Netamqp_exchange] | |
| disable_channel [Netamqp_endpoint] |
Enable/disable channels.
|
| disconnect [Netamqp_endpoint] |
Requests an orderly disconnect.
|
| drop_frames [Netamqp_endpoint] |
Request to drop any incoming frames (to be used after having
received the connection.close method)
|
E | |
| eff_max_frame_size [Netamqp_endpoint] |
These two function talk to the transport, see
Netampq_transport.amqp_multiplex_controller
|
| enable [Netamqp_endpoint.Debug] | |
| enable [Netamqp_transport.Debug] |
Enables
Netlog-style debugging
|
| enable_channel [Netamqp_endpoint] | |
| encode_body_message [Netamqp_methods_0_9] | |
| encode_header_message [Netamqp_methods_0_9] | |
| encode_heartbeat_message [Netamqp_methods_0_9] | |
| encode_longstr [Netamqp_rtypes] | |
| encode_message [Netamqp_methods_0_9] | |
| encode_method_message [Netamqp_methods_0_9] | |
| encode_proto_header_message [Netamqp_methods_0_9] | |
| encode_shortstr [Netamqp_rtypes] | |
| encode_table [Netamqp_rtypes] | |
| endpoint [Netamqp_channel] |
Return the endpoint the channel uses
|
| endpoint [Netamqp_connection] |
Return the endpoint the connection uses
|
| event_system [Netamqp_channel] |
Return the event system the channel uses
|
| event_system [Netamqp_connection] |
Return the event system the connection uses
|
| event_system [Netamqp_endpoint] |
Return the event system the endpoint uses
|
| expect_eof [Netamqp_endpoint] |
Instruct the endpoint not to generate an
Netamqp_types.Unexpected_eof
exception when EOF is seen from the server
|
F | |
| fanout [Netamqp_exchange] | |
| flow_control [Netamqp_endpoint] |
Requests that the flow is enabled (true) or disabled (false) for
a certain channel.
|
G | |
| get_e [Netamqp_basic] | |
| get_s [Netamqp_basic] |
Fetches a message synchronously from the queue.
|
| get_timeout [Netamqp_endpoint] |
Return the configured timeout value
|
| getpeername [Netamqp_endpoint] |
Get the names of the own socket and the peer socket, resp.
|
| getsockname [Netamqp_endpoint] | |
H | |
| headers [Netamqp_exchange] | |
I | |
| is_channel_enabled [Netamqp_endpoint] |
Whether a channel is enabled
|
| is_open [Netamqp_channel] |
Whether a channel is open.
|
| is_open [Netamqp_connection] |
The connection is first open after the open handshake has been
completed, i.e.
|
L | |
| listen_for_errors [Netamqp_endpoint] |
Defines an error listener.
|
M | |
| mk_mstring [Netamqp_rtypes] | |
N | |
| number [Netamqp_channel] |
Return the channel number
|
O | |
| on_deliver [Netamqp_basic] |
Registers a handler so that
cb is called back whenever a
message is delivered to the client.
|
| on_return [Netamqp_basic] |
Registers a handler so that
cb is called back whenever a
message is returned to the client.
|
| open_e [Netamqp_channel] |
Opens a channel on this connection.
|
| open_e [Netamqp_connection] |
Opens a connection: The endpoint is instructed to connect on the
transport level, to negotiate protocol parameters, and to
authenticate the client.
|
| open_next_e [Netamqp_channel] | |
| open_next_s [Netamqp_channel] |
Opens a channel, and chooses the channel number automatically.
|
| open_s [Netamqp_channel] |
Same as synchronous call
|
| open_s [Netamqp_connection] |
Same as synchronous function
|
P | |
| plain_auth [Netamqp_connection] | plain_auth username password: use PLAIN authentication.
|
| propagate_error [Netamqp_endpoint] |
Propagate the exception to handlers and engines.
|
| protocol [Netamqp_endpoint] |
Return the protocol
|
| publish_e [Netamqp_basic] | |
| publish_s [Netamqp_basic] |
Publishes the passed message.
|
| purge_e [Netamqp_queue] | |
| purge_s [Netamqp_queue] |
This function removes all messages from a queue which are not awaiting
acknowledgment.
|
Q | |
| qos_e [Netamqp_basic] | |
| qos_s [Netamqp_basic] |
Sets the quality of service for the channel (or the whole connection
if
global=true).
|
| quick_disconnect [Netamqp_endpoint] |
A quick disconnect proceeds faster than an orderly disconnect.
|
R | |
| read_uint2 [Netamqp_rtypes] | |
| read_uint2_unsafe [Netamqp_rtypes] | |
| recover_e [Netamqp_basic] | |
| recover_s [Netamqp_basic] |
Redeliver all unacknowledged messages on a
specified channel.
|
| register_async_s2c [Netamqp_endpoint] |
Asynchronous calls from the server:
Registers that the callback function is called
when the server sends a method of the given type.
|
| register_sync_s2c [Netamqp_endpoint] |
Synchronous calls initiated by the server:
Registers that the callback function is called
when the server sends a method of the given type.
|
| reject_e [Netamqp_basic] | |
| reject_s [Netamqp_basic] |
Rejects a message (instead of acknowledging it).
|
| reset [Netamqp_endpoint] |
Turns the endpoint off again.
|
| responses_of_method [Netamqp_methods_0_9] | |
| rollback_e [Netamqp_tx] | |
| rollback_s [Netamqp_tx] |
Rolls the current transaction back and starts a new one
|
S | |
| select_e [Netamqp_tx] | |
| select_s [Netamqp_tx] |
Selects transactions for this channel
|
| set_max_frame_size [Netamqp_endpoint] | |
| state [Netamqp_endpoint] |
Reports the connection state
|
| state_change_e [Netamqp_endpoint] |
The engine finishes at the next
state change.
|
| string_of_frame_type [Netamqp_types] | |
| string_of_method_id [Netamqp_methods_0_9] | |
| string_of_method_type [Netamqp_methods_0_9] | |
| string_of_sockaddr [Netamqp_transport] |
Convert to string, for debugging purposes
|
| suggest_channel [Netamqp_endpoint] |
Suggests a channel number
|
| sync_c2s_e [Netamqp_channel] | |
| sync_c2s_e [Netamqp_endpoint] | |
| sync_c2s_s [Netamqp_channel] |
Works very much like
Netamqp_endpoint.sync_c2s_e, but the channel_obj
can be passed, and the right timeout handling is done for this channel.
|
| sync_c2s_s [Netamqp_endpoint] |
Synchronous calls initiated by the client: Calls the argument method
and waits for the right reply method.
|
| system [Netamqp_exchange] |
The five standard exchange types.
|
T | |
| tcp_amqp_multiplex_controller [Netamqp_transport] |
The multiplex controller for stream encapsulation
|
| tls_session_props [Netamqp_endpoint] |
TLS session properties
|
| topic [Netamqp_exchange] | |
| type_of_method [Netamqp_methods_0_9] | |
U | |
| uint2_as_string [Netamqp_rtypes] | |
| unbind_e [Netamqp_queue] | |
| unbind_s [Netamqp_queue] |
Remove a binding.
|
| unsafe_rev_concat [Netamqp_rtypes] | |
W | |
| write_uint2 [Netamqp_rtypes] | |
| write_uint2_unsafe [Netamqp_rtypes] |
