Plasma GitLab Archive
Projects Blog Knowledge

Index of class methods


A
abort [Nethttpd_kernel.http_protocol]
Stops the transmission of data.
abort [Ftp_client.ftp_client_pi]
Shuts any active connection immediately down, and changes the state of the engine to `Aborted.
abort [Uq_engines.cache_t]
Any engine running to get the cache value is aborted, and the contents of the cache are invalidated.
abort [Uq_engines.engine]
Forces that the engine aborts operation.
abort [Uq_resolver.engine]
abort_rw [Rpc_transport.rpc_multiplex_controller]
Aborts the current reader and/or writer forever.
accept [Uq_engines.server_endpoint_acceptor]
Instantiates an engine that accepts connections on the listening endpoint.
accept_body [Nethttpd_reactor.http_reactive_request]
Call this method to unlock the body channels.
activate_lever [Netplex_types.container]
Runs a lever function registered in the controller.
activate_lever [Netplex_types.controller]
Runs the registered lever directly
add [Netsys_pollset.pollset]
Add a descriptor or modify an existing descriptor
add [Ftp_client.ftp_client]
Adds an FTP method to the queue of methods to execute.
add [Http_client.pipeline]
Adds the call to the end of the pipeline.
add_abort_action [Unixqueue_select.sb_event_system]
add_abort_action [Unixqueue.event_system]
add_admin [Netplex_types.controller]
add_admin setup: Allows to bind another RPC program to the admin socket.
add_auth_handler [Http_client.pipeline]
adds a new-style authentication handler
add_authentication_method [Http_client.pipeline]
adds an old-style authentication method
add_close_action [Unixqueue_select.sb_event_system]
add_close_action [Unixqueue.event_system]
add_cmd [Ftp_client.ftp_client_pi]
Add another command to the queue.
add_event [Unixqueue_select.sb_event_system]
add_event [Unixqueue.event_system]
add_handler [Unixqueue_select.sb_event_system]
add_handler [Unixqueue.event_system]
add_key [Http_client.key_ring]
Adds a key to the ring
add_message_receiver [Netplex_types.controller]
Adds a message receiver.
add_plugin [Netplex_types.controller]
Adds a plugin.
add_resource [Unixqueue_select.sb_event_system]
add_resource [Unixqueue.event_system]
add_service [Netplex_types.controller]
Adds a new service.
add_weak_resource [Unixqueue_select.sb_event_system]
add_weak_resource [Unixqueue.event_system]
add_with_callback [Http_client.pipeline]
Adds the call to the end of the pipeline.
addresses [Netplex_types.protocol]
The addresses of the master sockets.
adjust [Netplex_types.workload_manager]
This function is called by the controller at certain events to adjust the number of available containers.
advance [Nethttpd_kernel.http_response]
Tell this object that n bytes of the front token could be really sent using Unix.write.
alive [Rpc_transport.rpc_multiplex_controller]
If the controller is alive, the socket is not yet completely down.
alive [Uq_engines.multiplex_controller]
If the controller is alive, the socket is not yet completely down.
apop [Netpop.client]
Specifies the user and password using APOP authentication.
argument [Netcgi1_compat.Netcgi_types.cgi_activation]
argument [Netcgi.cgi]
#argument name returns the value of the argument named name.
argument [Netcgi_common.cgi]
argument_exists [Netcgi.cgi]
#argument_exists returns false if the named parameter is missing and true otherwise.
argument_exists [Netcgi_common.cgi]
argument_value [Netcgi1_compat.Netcgi_types.cgi_activation]
argument_value [Netcgi.cgi]
#argument_value returns the value of the argument as a string.
argument_value [Netcgi_common.cgi]
arguments [Netcgi1_compat.Netcgi_types.cgi_activation]
Mutability of arguments has been dropped.
arguments [Netcgi.cgi]
The complete list of arguments.
arguments [Netcgi_common.cgi]
as_auth_handler [Http_client.basic_auth_method]
as_memory [Xdr_mstring.mstring]
Returns the contents as memory.
as_string [Xdr_mstring.mstring]
Returns the contents as string.
assoc_multi_req_header [Http_client.http_call]
Return all header values for a given field name (header entries which allow several values separated by commas can also be transmitted by several header lines with the same name).
assoc_multi_resp_header [Http_client.http_call]
Return all response header values for a given field name (header entries which allow several values separated by commas can also be transmitted by several header lines with the same name).
assoc_req_header [Http_client.http_call]
Query a specific header entry, or raise Not_found
assoc_resp_header [Http_client.http_call]
Query a specific header entry of the response.
at_exit [Netcgi.cgi]
#at_exit f registers the function f to be executed when #finalize is called (which is done automatically when the request finishes).
at_exit [Netcgi_common.cgi]
attach [Telnet_client.telnet_session]
Attach to the event system.
auth_domain [Http_client.auth_session]
The list of domain URIs defines the protection space.
auth_in_advance [Http_client.auth_session]
Whether "authentication in advance" is enabled
auth_realm [Http_client.auth_session]
The realm
auth_scheme [Http_client.auth_session]
The authentication scheme, e.g.
auth_user [Http_client.auth_session]
The user identifier
authenticate [Rpc_server.auth_method]
This method is called when a remote call has arrived.
authenticate [Http_client.auth_session]
Returns a list of additional headers that will authenticate the passed call for this session.
avoid_proxy_for [Http_client.pipeline]
sets a list of host names or domain suffixes for which no proxy should be used.

B
bidirectional_phase [Nethttpd_kernel.http_response]
The bidrectional phase starts after "100 Continue" has been sent to the client, and stops when the response body begins.
blit_to_memory [Xdr_mstring.mstring]
blit_to_string mpos mem mempos len: Copies the substring of the managed string from mpos to mpos+len-1 to the substring of mem from mempos to mempos+len-1
blit_to_string [Xdr_mstring.mstring]
blit_to_string mpos s spos len: Copies the substring of the managed string from mpos to mpos+len-1 to the substring of s from spos to spos+len-1
block_size [Netstream.in_obj_stream]
The block size of the stream
body_size [Nethttpd_kernel.http_response]
Accumulated size of the response body
bool_param [Netplex_types.config_file]
broadcast [Netsys_oothr.condition]
In a multi-threaded program: Signal all waiting processes that the condition holds.

C
call_plugin [Netplex_types.container]
call_plugin p procname procarg: This method can be called from the container context to invoke the plugin p procedure procname.
callback [Netcgi_modtpl.template]
Set a callback in the template.
can_input [Uq_engines.async_in_channel]
Whether input is possible, i.e.
can_output [Uq_engines.async_out_channel]
Whether output is possible, i.e.
cancel_rd_polling [Rpc_transport.rpc_multiplex_controller]
Cancels polling for the next input message.
cancel_reading [Uq_engines.multiplex_controller]
Cancels the read job.
cancel_shutting_down [Rpc_transport.rpc_multiplex_controller]
Cancels the shutdown procedure.
cancel_shutting_down [Uq_engines.multiplex_controller]
Cancels the shutdown procedure.
cancel_wait [Netsys_pollset.pollset]
There is a cancel bit in the pollset, and this method sets it to the argument value.
cancel_writing [Uq_engines.multiplex_controller]
Cancels the write job.
capacity [Netplex_types.workload_manager]
Computes the capacity, i.e.
cgi_auth_type [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_auth_type [Netcgi.cgi_environment]
cgi_auth_type [Netcgi_common.cgi_environment]
cgi_gateway_interface [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_gateway_interface [Netcgi.cgi_environment]
cgi_gateway_interface [Netcgi_common.cgi_environment]
cgi_https [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_https [Netcgi.cgi_environment]
A well-known extension is the HTTPS property.
cgi_https [Netcgi_common.cgi_environment]
cgi_path_info [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_path_info [Netcgi.cgi_environment]
cgi_path_info [Netcgi_common.cgi_environment]
cgi_path_translated [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_path_translated [Netcgi.cgi_environment]
cgi_path_translated [Netcgi_common.cgi_environment]
cgi_properties [Nethttpd_types.request_info]
The distilled CGI properties
cgi_properties [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_properties [Netcgi.cgi_environment]
Return all properties as an associative list.
cgi_properties [Netcgi_common.cgi_environment]
Return the parameter properties.
cgi_property [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_property [Netcgi.cgi_environment]
Returns a (possibly non-standard) CGI environment property.
cgi_property [Netcgi_common.cgi_environment]
cgi_query_string [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_query_string [Netcgi.cgi_environment]
This is the row query string.
cgi_query_string [Netcgi_common.cgi_environment]
cgi_remote_addr [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_remote_addr [Netcgi.cgi_environment]
cgi_remote_addr [Netcgi_common.cgi_environment]
cgi_remote_host [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_remote_host [Netcgi.cgi_environment]
cgi_remote_host [Netcgi_common.cgi_environment]
cgi_remote_ident [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_remote_ident [Netcgi.cgi_environment]
cgi_remote_ident [Netcgi_common.cgi_environment]
cgi_remote_user [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_remote_user [Netcgi.cgi_environment]
cgi_remote_user [Netcgi_common.cgi_environment]
cgi_request_method [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_request_method [Netcgi.cgi_environment]
We recommend you to use the method Netcgi.cgi.request_method which is more type-safe and informative.
cgi_request_method [Netcgi_common.cgi_environment]
cgi_request_uri [Nethttpd_types.v_extended_environment]
The full request URI.
cgi_request_uri [Netcgi1_compat.Netcgi_env.cgi_environment]
I rest to be convinced we need this.
cgi_script_name [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_script_name [Netcgi.cgi_environment]
cgi_script_name [Netcgi_common.cgi_environment]
cgi_server_name [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_server_name [Netcgi.cgi_environment]
cgi_server_name [Netcgi_common.cgi_environment]
cgi_server_port [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_server_port [Netcgi.cgi_environment]
cgi_server_port [Netcgi_common.cgi_environment]
cgi_server_protocol [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_server_protocol [Netcgi.cgi_environment]
cgi_server_protocol [Netcgi_common.cgi_environment]
cgi_server_software [Netcgi1_compat.Netcgi_env.cgi_environment]
cgi_server_software [Netcgi.cgi_environment]
cgi_server_software [Netcgi_common.cgi_environment]
change_user_to [Netplex_types.socket_service_config]
Instructs the container to change the user of the process after starting the service.
charset [Netcgi1_compat.Netcgi_types.cgi_argument]
charset [Netcgi.cgi_argument]
The charset parameter of the content type of the header, or "" when there is no such parameter, or no header.
charset [Netcgi_common.cgi_argument]
clear [Http_client.key_ring]
Deletes all keys from this key ring
clear [Unixqueue_select.sb_event_system]
clear [Unixqueue.event_system]
close [Nethttpd_reactor.http_reactor]
Closes the file descriptor with a reliable method.
close_all [Http_client_conncache.connection_cache]
Closes all descriptors known to the cache
close_connection [Nethttpd_kernel.http_response]
Returns whether the connection should be closed after this response.
close_connection [Http_client_conncache.connection_cache]
Deletes the connection from the cache, and closes it
close_in [Netchannels.augment_raw_in_channel]
As in raw_in_channel
close_in [Netchannels.rec_in_channel]
Closes the channel for input.
close_in [Uq_engines.async_in_channel]
Closes the channel
close_out [Netchannels.augment_raw_out_channel]
As in raw_out_channel
close_out [Netchannels.rec_out_channel]
Flushes the buffer, if any, and closes the channel for output.
close_out [Uq_engines.async_out_channel]
Closes the channel
cnt_crashed_connections [Http_client.pipeline]
Counts connections with network or protocol errors
cnt_failed_connections [Http_client.pipeline]
Counts totally failed connections (no more reconnects allowed)
cnt_new_connections [Http_client.pipeline]
Counts new connections (or better: attempts to establish connections)
cnt_server_eof_connections [Http_client.pipeline]
Counts connections the server terminated with EOF
cnt_successful_connections [Http_client.pipeline]
Counts connections closed because pipelines become empty
cnt_timed_out_connections [Http_client.pipeline]
Counts connections given up because of timeouts
commit_work [Netchannels.trans_out_obj_channel]
Flushes the transaction buffer, and writes its contents to the underlying resource.
conditional [Netcgi_modtpl.template]
Set a conditional in the template.
config [Nethttpd_kernel.http_protocol]
Just returns the configuration
config [Netcgi1_compat.Netcgi_env.cgi_environment]
config [Netcgi.cgi_environment]
The configuration of the request.
config [Netcgi_common.cgi_environment]
config_announce_server [Nethttpd_kernel.http_protocol_config]
Whether to set the Server header: `Ignore: The kernel does not touch the Server header., `Ocamlnet: Announce this web server as "Ocamlnet/<version>", `Ocamlnet_and s: Announce this web server as s and append the Ocamlnet string., `As s: Announce this web server as s
config_cgi [Nethttpd_reactor.http_processor_config]
The CGI configuration to use in the Netcgi environment
config_error_response [Nethttpd_reactor.http_processor_config]
Get HTML error text for the HTTP status code.
config_error_response [Nethttpd_types.min_config]
config_input_flow_control [Nethttpd_engine.http_engine_config]
If true, the engine stops reading input tokens from the HTTP kernel when there is data in the input channel of the engine not yet read.
config_limit_pipeline_length [Nethttpd_kernel.http_protocol_config]
Limits the length of the pipeline (= unreplied requests).
config_limit_pipeline_size [Nethttpd_kernel.http_protocol_config]
Limits the size of the pipeline in bytes.
config_log_access [Nethttpd_reactor.http_processor_config]
Logs the access after the request/response cycle is complete.
config_log_error [Nethttpd_reactor.http_processor_config]
config_log_error info msg: Log the message msg.
config_log_error [Nethttpd_types.min_config]
config_max_header_length [Nethttpd_kernel.http_protocol_config]
Maximum size of the header, including the request line.
config_max_reqline_length [Nethttpd_kernel.http_protocol_config]
Maximum size of the request line.
config_max_trailer_length [Nethttpd_kernel.http_protocol_config]
Maximum size of the trailer
config_output_flow_control [Nethttpd_engine.http_engine_config]
If true, the engine signals the user when there is already enough data to output, and no more output should be generated.
config_reactor_synch [Nethttpd_reactor.http_reactor_config]
Specifies when to synchronize output, i.e.
config_suppress_broken_pipe [Nethttpd_kernel.http_protocol_config]
Whether to suppress `Broken_pipe errors.
config_synch_input [Nethttpd_engine.http_engine_processing_config]
The "input synchronizer": It is called as obj # config_synch_input f ch to create a synchronous input channel from an asynchronous one, ch.
config_synch_output [Nethttpd_engine.http_engine_processing_config]
The "output synchronizer": It is called as obj # config_synch_output f ch to create a synchronous output channel from an asynchronous one, ch.
config_timeout [Nethttpd_reactor.http_processor_config]
General timeout for network I/O (per I/O primitive).
config_timeout_next_request [Nethttpd_reactor.http_processor_config]
Timeout in seconds to wait for the next request after the previous one has been completely received.
configure_slave_socket [Netplex_types.protocol]
A user-supplied function to configure slave sockets (after accept).
connect [Ftp_client.ftp_method]
The host and port the FTP method wants to be connected to.
connect [Uq_engines.client_endpoint_connector]
Instantiates an engine that connects to the endpoint given by the connect_address argument.
connection_cache [Http_client.pipeline]
The current connection cache.
connections [Http_client.pipeline]
Reports which connections exist: (host, port, queue_length)
container_id [Netplex_types.container]
Return the container ID
container_state [Netplex_types.socket_controller]
containers [Netplex_types.controller]
Lists the containers
content_disposition [Netmime.mime_header_ro]
Returns the Content-disposition field as parsed value.
content_length [Netmime.mime_header_ro]
Returns the Content-length field as integer
content_transfer_encoding [Netmime.mime_header_ro]
Returns the Content-transfer-encoding as string
content_type [Netmime.mime_header_ro]
Returns the Content-type as parsed value.
content_type [Netcgi1_compat.Netcgi_types.cgi_argument]
content_type [Netcgi.cgi_argument]
Returns the content type of the header and its parameters as a couple (hdr, params).
content_type [Netcgi_common.cgi_argument]
content_type_params [Netcgi1_compat.Netcgi_types.cgi_argument]
Method content_type : unit -> string * (string * Mimestring.s_param) list defined instead of content_type and content_type_params to be coherent with Netmime.mime_header_ro -- yet as easy to use.
controller_config [Netplex_types.netplex_config]
controller_config [Netplex_types.socket_service_config]
Make this config accessible here too, for convenience
controller_config [Netplex_types.controller]
cookie [Netcgi.cgi_environment]
#cookie cn returns the cookie with name cn.
cookie [Netcgi_common.cgi_environment]
cookies [Netcgi1_compat.Netcgi_env.cgi_environment]
Cookies are returned in decoded form.
cookies [Netcgi.cgi_environment]
Returns the list of valid cookies found in the request header.
cookies [Netcgi_common.cgi_environment]
copy [Netfs.stream_fs]
Copies a file to a new name.
copy [Http_fs.http_stream_fs]
create_condition [Netsys_oothr.mtprovider]
In a multi-threaded program: Creates a condition variable and returns the object.
create_container [Netplex_types.socket_service]
Internal method.
create_datagram_socket [Uq_engines.datagram_socket_provider]
Creates an engine that creates a wrapped_datagram_socket object and that sets up any further resources the objects needs.
create_from_memory [Xdr_mstring.mstring_factory]
create_from_memory m pos len must_copy: Creates the mstring from the sub string of m starting at pos with length len
create_from_string [Xdr_mstring.mstring_factory]
create_from_string s pos len must_copy: Creates the mstring from the sub string of s starting at pos with length len
create_logger [Netplex_types.logger_factory]
create_logger [Netplex_types.controller_config]
Create a logger to be used for the whole Netplex system.
create_mem_mutex [Netplex_types.parallelizer]
let lock, unlock = par#create_mem_locker(): Creates a mutex that is sufficient to protect process memory from uncoordinated access.
create_mutex [Netsys_oothr.mtprovider]
In a multi-threaded program: Creates a mutex and returns the object.
create_processor [Netplex_types.processor_factory]
create_session [Http_client.auth_handler]
Create a new authentication session.
create_thread [Netsys_oothr.mtprovider]
In a multi-threaded program: Starts a new thread, and calls the passed function with the passed argument in the new thread (like Thread.create).
create_workload_manager [Netplex_types.workload_manager_factory]
ctrl_added [Netplex_types.plugin]
This method is invoked when the plugin has been added to this controller.
ctrl_container_finished [Netplex_types.plugin]
This method is called when a container finishes (after post_finish_hook).
ctrl_receive_call [Netplex_types.plugin]
ctrl_receive_call ctrl cid procname procarg emit: This method is called in the controller context ctrl when a procedure named procname is called.
ctrl_unplugged [Netplex_types.plugin]
The plugin has been unplugged from this controller
current_sys_id [Netplex_types.parallelizer]
Returns the system-dependent thread identifier of the caller
cycle [Nethttpd_kernel.lingering_close]
Reads data from the file descriptor until EOF or until a fixed timeout is over.
cycle [Nethttpd_kernel.http_protocol]
Looks at the file descriptor.

D
data [Netsmtp.client]
This method really send the mail.
data [Netcgi_fcgi.cgi]
This the the channel on which the filter data is available.
data_length [Netcgi_fcgi.cgi]
How many bytes of the data are available.
data_mtime [Netcgi_fcgi.cgi]
The data last modification time, expressed as an integer number of seconds since the epoch (January 1, 1970 UTC).
datagram_type [Uq_engines.wrapped_datagram_socket]
def_empty_path_replacement [Http_client.generic_call]
def_has_req_body [Http_client.generic_call]
def_has_resp_body [Http_client.generic_call]
def_is_idempotent [Http_client.generic_call]
def_request_method [Http_client.generic_call]
The following methods define the values for the corresponding methods without the def_ prefix:
def_term [Nethttpd_types.http_service]
The definition term
dele [Netpop.client]
Marks the message number of the current mailbox for deletion.
delete_argument [Netcgi1_compat.Netcgi_types.cgi_activation]
delete_field [Netmime.mime_header]
These methods modify the fields of the header.
descr [Ftp_data_endpoint.ftp_data_engine]
The socket to use for data transfers.
descr_state [Ftp_data_endpoint.ftp_data_engine]
The socket state
descriptor [Uq_engines.wrapped_datagram_socket]
The underlying file descriptor.
dest_status [Http_client.http_call]
Returns the status line of the last response (but status lines with code 100 are ignored).
disable [Netplex_types.socket_controller]
Disable a socket service temporarily
disable_local_option [Telnet_client.telnet_session]
disable_remote_option [Telnet_client.telnet_session]
dispose [Netsys_pollset.pollset]
Release any OS resources associated with the pollset.
do_input [Nethttpd_kernel.http_protocol]
Returns true iff the protocol engine is interested in new data from the socket.
do_output [Nethttpd_kernel.http_protocol]
Returns true iff the protocol engine has data to output to the socket
domain [Http_client.key]
The domain URIs defining the protection space.

E
effective_request_uri [Http_client.http_call]
The URI actually sent to the server in the request line of the protocol.
empty_path_replacement [Http_client.http_call]
The string to substitute in the request line for the empty path.
enable [Netplex_types.socket_controller]
Enables a disabled socket service again
enable_local_option [Telnet_client.telnet_session]
enable_remote_option [Telnet_client.telnet_session]
engine [Nethttpd_engine.http_engine_processing_context]
The engine doing HTTP
enhanced_input [Netchannels.enhanced_raw_in_channel]
Works similar to input, but distinguishes between normal data and end-of-line separators.
enhanced_input_line [Netchannels.enhanced_raw_in_channel]
An improved implementation of input_line that uses the buffer
environment [Nethttpd_engine.http_request_notification]
The request environment.
environment [Nethttpd_engine.http_request_header_notification]
The request environment.
environment [Nethttpd_reactor.http_reactive_request]
The Netcgi environment representing the request header, the response header, and the channels to receive the request body and to send the response body.
environment [Netcgi1_compat.Netcgi_types.cgi_activation]
environment [Netcgi.cgi]
The environment object.
environment [Netcgi_common.cgi]
error_message [Nethttpd_types.error_response_params]
The error message explaining the detail that went wrong
event_system [Rpc_transport.rpc_multiplex_controller]
Returns the event system
event_system [Netplex_types.container]
The event system the container uses
event_system [Netplex_types.controller]
The event system used by the controller.
event_system [Ftp_client.ftp_client_pi]
The used event system
event_system [Http_client.pipeline]
Returns the event system
event_system [Uq_engines.multiplex_controller]
Returns the event system
event_system [Uq_engines.engine_mixin]
event_system [Uq_engines.engine]
Returns the event system the engine is attached to
event_system [Uq_resolver.engine]
execute [Ftp_client.ftp_method]
This method is called when the ftp_client_pi is connected and the queue of commands is empty.
exists_resource [Unixqueue_select.sb_event_system]
exists_resource [Unixqueue.event_system]
expn [Netsmtp.client]
Expand command : expn list will try to expand the Mailing list list.

F
fd [Nethttpd_kernel.lingering_close]
The file descriptor
fd [Nethttpd_kernel.http_protocol]
Just returns the socket
fetch_subnegotiation [Telnet_client.telnet_session]
This method should be called as follows: If you find a Telnet_sb at the beginning of the input queue, remove this command Queue.take, and invoke fetch_subnegotiation.
field [Netmime.mime_header_ro]
fields [Netmime.mime_header_ro]
file_exists [Netglob.glob_fsys]
Whether the file name is valid and refers to an existing file, or to a symlink pointing to an existing file.
file_is_dir [Netglob.glob_fsys]
Whether the file name is valid and a directory, or a symlink to a directory.
filename [Netplex_types.config_file]
filename [Netcgi1_compat.Netcgi_types.cgi_argument]
filename [Netcgi.cgi_argument]
The filename parameter found in the header of file uploads.
filename [Netcgi_common.cgi_argument]
finalize [Netmime.mime_body_ro]
After the body has been finalized, it cannot be accessed any longer.
finalize [Netcgi1_compat.Netcgi_types.cgi_activation]
finalize [Netcgi1_compat.Netcgi_types.cgi_argument]
finalize [Netcgi.cgi]
This method calls #finalize for every CGI argument (including the possible one of PUT) to ensure that all files are deleted.
finalize [Netcgi.cgi_argument]
Arguments stored in temp files must be deleted when the argument is no longer used.
finalize [Netcgi_common.cgi_argument]
finalize [Netcgi_common.cgi]
find [Netsys_pollset.pollset]
Checks whether a descriptor is member of the set, and returns its event mask.
find_inactive_connection [Http_client_conncache.connection_cache]
Returns an inactive connection to the passed peer, or raise Not_found.
find_my_connections [Http_client_conncache.connection_cache]
Returns all active connections owned by the object
finish [Nethttpd_reactor.http_reactive_request]
This method should be called after the request has been fully processed.
finish_request [Nethttpd_reactor.http_reactive_request]
Reads the rest of the body (if any), and discards that data
fixup_request [Http_client.generic_call]
This method is called just before sending the request.
flavors [Rpc_server.auth_method]
Which credential flavors are handled by this method
float_param [Netplex_types.config_file]
flush [Netchannels.augment_raw_out_channel]
As in raw_out_channel
flush [Netchannels.rec_out_channel]
If there is a write buffer, it will be flushed.
flush [Uq_engines.async_out_channel]
Flushes the channel.
free_resources [Netplex_types.controller]
Should be called when the controller is finished, in order to free resources again.
front_token [Nethttpd_kernel.http_response]
The first token of the queue, represented as data_chunk.
ftp_state [Ftp_client.ftp_client_pi]
Returns the current ftp_state

G
generate_response [Nethttpd_types.http_service_generator]
Third stage of HTTP processing: This method is called when the HTTP request has been completely received, and the response is going to be generated.
get_connection_state [Http_client_conncache.connection_cache]
Returns the state of the file descriptor
get_engine [Uq_engines.cache_t]
Requests the value.
get_host [Http_client.http_call]
The host name of the content server, extracted from the URI
get_local_option [Telnet_client.telnet_session]
get_opt [Uq_engines.cache_t]
Returns the cached value if available
get_options [Telnet_client.telnet_session]
Get the configuration options.
get_options [Http_client.pipeline]
get_path [Http_client.http_call]
The path extracted from the URI
get_port [Http_client.http_call]
The port number of the content server, extracted from the URI
get_reconnect_mode [Http_client.http_call]
Get what to do if the server needs to be reconnected, i.e.
get_redirect_mode [Http_client.http_call]
By default, the redirect mode is Redirect_if_idem.
get_remote_option [Telnet_client.telnet_session]
get_req_body [Http_client.http_call]
What has been sent as body in the (last) request.
get_req_header [Http_client.http_call]
Deprecated.
get_req_method [Http_client.http_call]
Get the name of the request method.
get_resp_body [Http_client.http_call]
Deprecated.
get_resp_header [Http_client.http_call]
Deprecated.
get_uri [Http_client.http_call]
the full URI of this message: http://server:port/path.
getpeername [Rpc_transport.rpc_multiplex_controller]
The address of the peer's socket.
getsockname [Rpc_transport.rpc_multiplex_controller]
The address of this socket
global_exception_handler [Netplex_types.processor_hooks]
This method is called when an uncaught exception would otherwise terminate the container.
group [Uq_engines.poll_engine]
Returns the group the engine is member of

H
has_req_body [Http_client.http_call]
Whether the method allows to send a request body
has_resp_body [Http_client.http_call]
Whether the method allows to reply with a body.
hello [Netplex_types.workload_manager]
Called by the controller when the service is added
helo [Netsmtp.client]
Sends an HELLO command to the server.
help [Netsmtp.client]
Performs the Help command.
home_directory [Netglob.user_info]
Returns the home directory of the passed user, or the home directory of the current user for the empty string.
host_by_name [Uq_resolver.resolver]
Look up the passed host name up.

I
id [Netsys_oothr.thread]
In a multi-threaded program: Returns the thread ID.
id [Netmcore.compute_resource]
an ID of the resource that is valid in the whole Netplex system
inactivate [Rpc_transport.rpc_multiplex_controller]
Inactivates the connection immediately, and releases any resources the controller is responsible for (e.g.
inactivate [Uq_engines.multiplex_controller]
Inactivates the connection immediately, and releases any resources the controller is responsible for (e.g.
inactivity_timeout [Netplex_workload.dynamic_workload_config]
After this number of seconds a free thread can be terminated
info_string [Netplex_types.par_thread]
Outputs the process or thread ID
init [Netplex_types.parallelizer]
Initializes the main process for usage with this parallelizer.
initial_argument [Netcgi1_compat.Netcgi_types.cgi_activation]
initial_argument_value [Netcgi1_compat.Netcgi_types.cgi_activation]
initial_arguments [Netcgi1_compat.Netcgi_types.cgi_activation]
initial_multiple_argument [Netcgi1_compat.Netcgi_types.cgi_activation]
input [Netchannels.augment_raw_in_channel]
As in raw_in_channel
input [Netchannels.rec_in_channel]
Reads octets from the channel and puts them into the string.
input [Uq_engines.async_in_channel]
input s k n: Reads channel data into the substring of s beginning at index k with length n.
input_body_size [Nethttpd_types.request_info]
The size of the input body.
input_body_size [Nethttpd_types.v_extended_environment]
so far known, or 0L
input_byte [Netchannels.compl_in_channel]
Reads exactly one octet from the channel and returns its code, or raises End_of_file
input_ch [Netcgi1_compat.Netcgi_env.cgi_environment]
Not the user business.
input_ch_async [Nethttpd_engine.extended_async_environment]
This is the input_ch channel taken as asynchonous channel.
input_channel [Nethttpd_types.v_extended_environment]
The input channel for reading the body of the request
input_char [Netchannels.compl_in_channel]
Reads exactly one character from the channel, or raises End_of_file
input_content_length [Netcgi1_compat.Netcgi_env.cgi_environment]
input_content_length [Netcgi.cgi_environment]
Returns the "Content-length" request header field.
input_content_length [Netcgi_common.cgi_environment]
input_content_type [Netcgi1_compat.Netcgi_env.cgi_environment]
Type now is unit -> string * (string * Mimestring.s_param) list to be coherent with Netmime.mime_header_ro.
input_content_type [Netcgi.cgi_environment]
Returns the parsed "Content-type" request header field.
input_content_type [Netcgi_common.cgi_environment]
input_content_type_string [Netcgi1_compat.Netcgi_env.cgi_environment]
input_content_type_string [Netcgi.cgi_environment]
Returns the "Content-type" request header field as a plain string or "" if it is not set.
input_content_type_string [Netcgi_common.cgi_environment]
input_eor [Ftp_data_endpoint.in_record_channel]
Skips over the remaining data of the current record and the record boundary to the next record.
input_header [Nethttpd_types.request_info]
The request header.
input_header [Netcgi1_compat.Netcgi_env.cgi_environment]
input_header [Netcgi.cgi_environment]
The whole HTTP header.
input_header [Netcgi_common.cgi_environment]
For special header structures, just override this method.
input_header_field [Netcgi1_compat.Netcgi_env.cgi_environment]
input_header_field [Netcgi.cgi_environment]
#input_header_field ?default f returns the value of a field f of the HTTP request header.
input_header_field [Netcgi_common.cgi_environment]
input_header_fields [Netcgi1_compat.Netcgi_env.cgi_environment]
input_header_fields [Netcgi.cgi_environment]
Returns the input header as (name,value) pairs.
input_header_fields [Netcgi_common.cgi_environment]
input_line [Netchannels.compl_in_channel]
Reads the next line from the channel.
input_queue [Telnet_client.telnet_session]
The queue of commands received from the remote side.
input_state [Netcgi1_compat.Netcgi_env.cgi_environment]
Not the user business.
input_timeout_class [Nethttpd_kernel.http_protocol]
Suggests the calculation of a timeout value for input: `Normal: The normal timeout value applies, `Next_message: The timeout value applies while waiting for the next message, `None: The connection is output-driven, no input timeout value
inquire_key [Http_client.key_handler]
The method is called when a new session must be authenticated.
int_param [Netplex_types.config_file]
invalidate [Http_client.auth_session]
The session is notified that authentication failed.
invalidate [Uq_engines.cache_t]
Invalidates the cache - if a value exists in the cache, it is removed.
invalidate_key [Http_client.key_handler]
The handler is notified that authentication failed for this key
is_empty [Ftp_client.ftp_client_pi]
Whether the queue is empty
is_idempotent [Http_client.http_call]
Whether the method is to be considered as idempotent ( = repeated invocations have the same result and no side effect).
is_proxy_allowed [Http_client.http_call]
Deprecated.
is_running [Unixqueue_select.sb_event_system]
is_running [Unixqueue.event_system]
is_served [Http_client.http_call]
true if request/response cycle(s) have been finished, i.e.

J
job [Shell_uq.job_handler_engine_type]
Returns the called job
job [Shell_sys.job_handler_engine_type]
Returns the called job
job_instance [Shell_uq.job_handler_engine_type]
Returns the job instance
job_instance [Shell_sys.job_handler_engine_type]
Returns the job instance
join [Netsys_oothr.thread]
In a multi-threaded program: Suspends the calling thread until this thread terminates.

K
keys [Http_client.key_ring]
List of all known keys

L
last_response_header [Http_fs.http_stream_fs]
Returns the header of the HTTP response of the last operation.
last_stderr [Shell_fs.shell_stream_fs]
The stderr output of the last operation
length [Xdr_mstring.mstring]
The length of the managed string
lingering [Nethttpd_kernel.lingering_close]
Whether the socket is still lingering
list [Netpop.client]
Returns the scan listing for an optional message number or for all messages in the current mailbox.
listen [Uq_engines.server_endpoint_listener]
Instantiates an engine that listens for connections on the socket given by the listen_address argument.
listen_options [Rpc_server.socket_config]
local_receiver [Ftp_data_endpoint.ftp_data_receiver]
The local receiver.
local_sender [Ftp_data_endpoint.ftp_data_sender]
The local sender.
lock [Netsys_oothr.mutex]
In a multi-threaded program: Suspends the calling thread until the mutex is locked.
log [Netplex_types.container]
Sends a log message to the controller.
log [Netplex_types.logger]
Same as log_subch when subchannel is set to the empty string.
log_access [Nethttpd_reactor.internal_environment]
log_component [Netplex_log.generic_config]
log_directory [Netplex_log.multi_file_config]
log_error [Netcgi1_compat.Netcgi_env.cgi_environment]
log_error [Netcgi.cgi_environment]
#log_error msg appends msg to the webserver log.
log_error [Netcgi_common.cgi_environment]
You may want to override this with your custom logging method.
log_facility [Netplex_log.syslog_config]
log_files [Netplex_log.multi_file_config]
Triples (component, subchannel, max_level, file, format) .
log_format [Netplex_log.generic_config]
log_identifier [Netplex_log.syslog_config]
log_max_level [Netplex_log.generic_config]
log_props [Nethttpd_types.v_extended_environment]
Remember this version of cgi_properties as the one sent to the config_log_access function
log_subch [Netplex_types.container]
Sends a log message to the controller.
log_subch [Netplex_types.logger]
Receive a log message of level from component.
log_subchannel [Netplex_log.generic_config]
logger [Netplex_types.controller]
The logger
lookup [Netplex_types.container]
lookup service_name protocol_name tries to find a Unix domain socket for the service and returns it.
lookup_container_sockets [Netplex_types.container]
lookup_container_sockets service_name protocol_name: returns the Unix Domain paths of all container sockets for this service and protocol.
lstn_backlog [Netplex_types.protocol]
The backlog (argument of Unix.listen)
lstn_reuseaddr [Netplex_types.protocol]
Whether to reuse ports immediately

M
mail [Netsmtp.client]
Performs a MAIL FROM command.
mailboxes [Netaddress.group]
The member mailboxes
max_free_job_capacity [Netplex_workload.dynamic_workload_config]
If more job capacity is available than this number, threads are terminated.
max_jobs_per_thread [Netplex_workload.dynamic_workload_config]
How many jobs every thread can execute concurrently until it is considered as fully loaded.
max_level [Netplex_types.controller_config]
Return the maximum global log level
max_threads [Netplex_workload.dynamic_workload_config]
The manager does not start more threads than this number
mem_supported [Uq_engines.multiplex_controller]
Whether start_mem_reading and start_mem_writing are possible
min_free_job_capacity [Netplex_workload.dynamic_workload_config]
The manager starts as many threads as required to ensure that this number of jobs can be executed.
mkdir [Netfs.stream_fs]
Creates a new directory.
mkdir [Http_fs.http_stream_fs]
multiple_argument [Netcgi1_compat.Netcgi_types.cgi_activation]
multiple_argument [Netcgi.cgi]
#multiple_argument name returns all the values of the argument named name.
multiple_argument [Netcgi_common.cgi]
multiple_connections [Uq_engines.server_endpoint_acceptor]
Whether it is possible to accept multiple connections
multiple_field [Netmime.mime_header_ro]
The current fields of the header.
multiple_input_header_field [Netcgi1_compat.Netcgi_env.cgi_environment]
multiple_input_header_field [Netcgi.cgi_environment]
Returns the values of all fields with the passed name of the request header.
multiple_input_header_field [Netcgi_common.cgi_environment]
multiple_output_header_field [Netcgi1_compat.Netcgi_env.cgi_environment]
multiple_output_header_field [Netcgi.cgi_environment]
Returns the values of all fields with the passed name of the repsonse header.
multiple_output_header_field [Netcgi_common.cgi_environment]
multiplexing [Rpc_server.socket_config]
multiplexing [Rpc_client.socket_config]

N
name [Rpc_server.auth_method]
The name of the authentication method
name [Rpc_client.auth_method]
The name of this method, used for errors etc.
name [Netsys_posix.post_fork_handler]
name [Netaddress.group]
The name of the group
name [Netaddress.mailbox]
The name of the mailbox.
name [Netplex_types.logger_factory]
name [Netplex_types.workload_manager_factory]
name [Netplex_types.processor_factory]
name [Netplex_types.ctrl_message_receiver]
The name of this receiver
name [Netplex_types.protocol]
The protocol name is an arbitrary string identifying groups of sockets serving the same protocol for a socket_service.
name [Netplex_types.socket_service_config]
The proposed name for the socket_service
name [Netplex_types.socket_service]
The name of the socket_service is used to identify the service in the whole netplex process cluster.
name [Nethttpd_types.http_service]
The name of the type of the service provider
name [Http_client.basic_auth_method]
name [Netcgi1_compat.Netcgi_types.cgi_argument]
name [Netcgi.cgi_argument]
The name of the argument.
name [Netcgi_common.cgi_argument]
need_linger [Nethttpd_kernel.http_protocol]
Returns true when a lingering close operation is needed to reliably shut down the socket.
new_group [Unixqueue_select.sb_event_system]
new_group [Unixqueue.event_system]
new_session [Rpc_client.auth_method]
Begin a new session
new_wait_id [Unixqueue_select.sb_event_system]
new_wait_id [Unixqueue.event_system]
next_credentials [Rpc_client.auth_session]
Returns (cred_flavour, cred_data, verifier_flavor, verifier_date)
next_request [Nethttpd_reactor.http_reactor]
Tries to read the next request.
no_proxy [Http_client.http_call]
Same as set_proxy_enabled false
nominal_dot_dot [Netfs.stream_fs]
Whether the effect of .. can be obtained by stripping off the last path component, i.e.
nominal_dot_dot [Http_fs.http_stream_fs]
non_blocking_connect [Rpc_client.socket_config]
non_blocking_connect: Whether the remote service is connected in the background.
noop [Netsmtp.client]
NOOP : does nothing, keeps the connection alive.
noop [Netpop.client]
Pings the server to keep the session alive.
notify [Uq_engines.engine_mixin]
number_of_open_connections [Http_client.pipeline]
Returns the number of connections which are open at the same time and currently being used by this object (i.e.
number_of_open_messages [Http_client.pipeline]
Returns the number of messages which are still in the pipeline.

O
offer_local_option [Telnet_client.telnet_session]
open_value_rd [Netmime.mime_body_ro]
Opens the value for reading.
open_value_rd [Netcgi1_compat.Netcgi_types.cgi_argument]
open_value_rd [Netcgi.cgi_argument]
Open the contents of the value as an input channel.
open_value_rd [Netcgi_common.cgi_argument]
open_value_wr [Netcgi1_compat.Netcgi_types.cgi_argument]
See #set_value.
open_value_wr [Netmime.mime_body]
Opens the value for writing.
open_value_wr [Netcgi.rw_cgi_argument]
open_value_wr [Netcgi_common.rw_cgi_argument]
option_negotiation_is_over [Telnet_client.telnet_session]
out_channel [Netcgi.cgi]
The output channel to which the generated content is intended to be written.
out_channel [Netcgi.cgi_environment]
The "raw" output channel.
out_channel [Netcgi_common.cgi]
out_channel [Netcgi_common.cgi_environment]
output [Netchannels.augment_raw_out_channel]
As in raw_out_channel
output [Netchannels.rec_out_channel]
Takes octets from the string and writes them into the channel.
output [Netcgi1_compat.Netcgi_types.cgi_activation]
output [Netcgi.cgi]
output [Netcgi_common.cgi]
output [Netcgi_modtpl.template]
output cgi outputs the template to the CGI session cgi.
output [Uq_engines.async_out_channel]
output s k n: Writes the substring of s beginning at index k with length n into the channel.
output_body_size [Nethttpd_types.full_info]
The size of the output body.
output_buffer [Netchannels.compl_out_channel]
Writes exactly the contents of the buffer
output_byte [Netchannels.compl_out_channel]
Writes exactly one byte passed as integer code
output_ch [Netcgi1_compat.Netcgi_env.cgi_environment]
output_ch [Netcgi.cgi_environment]
output_ch [Netcgi_common.cgi_environment]
output_ch_async [Nethttpd_engine.extended_async_environment]
This is the output_ch channel taken as asynchronous channel.
output_channel [Netchannels.compl_out_channel]
Writes the contents of an in_obj_channel until the end of the input channel is reached.
output_char [Netchannels.compl_out_channel]
Writes exactly one character
output_eor [Ftp_data_endpoint.out_record_channel]
Finishes the current record.
output_header [Nethttpd_types.full_info]
The response header
output_header [Netcgi1_compat.Netcgi_env.cgi_environment]
output_header [Netcgi.cgi_environment]
The whole HTTP response header
output_header [Netcgi_common.cgi_environment]
For special header structures, override this method and maybe #send_output_header.
output_header_field [Netcgi1_compat.Netcgi_env.cgi_environment]
output_header_field [Netcgi.cgi_environment]
Returns the value of a field of the response header.
output_header_field [Netcgi_common.cgi_environment]
output_header_fields [Netcgi1_compat.Netcgi_env.cgi_environment]
output_header_fields [Netcgi.cgi_environment]
Returns the output header as (name,value) pairs.
output_header_fields [Netcgi_common.cgi_environment]
output_queue [Telnet_client.telnet_session]
The queue of commands to send to the remote side.
output_state [Nethttpd_types.v_extended_environment]
Reflects the state of the output generation: `Start: Nothing is generated yet, `Sending: Output is already being sent, `End: The response (for a single request) has been fully sent
output_state [Nethttpd_types.extended_environment]
output_state [Netcgi1_compat.Netcgi_env.cgi_environment]
Not the user business.
output_string [Netchannels.compl_out_channel]
Writes exactly the passed string
owned_container_sockets [Netplex_types.container]
List of pairs (protocol_name, path) of all container sockets of this container

P
parallelizer [Netplex_types.par_thread]
Returns the parallelizer that created this thread.
pass [Netpop.client]
Authenticates a user with the plain-text password pass.
password [Http_client.key]
The password in cleartext
path_encoding [Netglob.glob_fsys]
Paths of filesystems may be encoded
path_encoding [Netglob.user_info]
Paths of filesystems may be encoded
path_encoding [Netfs.stream_fs]
The encoding must be ASCII-compatible (Netconversion.is_ascii_compatible).
path_encoding [Http_fs.http_stream_fs]
path_exclusions [Netfs.stream_fs]
Code points that must not occur in path components between slashes.
path_exclusions [Http_fs.http_stream_fs]
peek [Rpc_server.auth_method]
If available, this function is called for every accepted connection.
peek_recv [Nethttpd_kernel.http_protocol]
Peeks the first token, but leaves it in the queue.
peer_user_name [Rpc_transport.rpc_multiplex_controller]
If the transport mechanism provides a way to authenticate the peer, it can return the name here.
pipeline_len [Nethttpd_kernel.http_protocol]
Returns the number of unanswered requests = Number of received `Req_end tokens minus number of responses in state `Processed.
pos_in [Netchannels.augment_raw_in_channel]
As in raw_in_channel
pos_in [Netchannels.raw_in_channel]
Returns the current channel position.
pos_in [Uq_engines.async_in_channel]
Returns the number of characters read from the channel
pos_out [Netchannels.augment_raw_out_channel]
As in raw_out_channel
pos_out [Netchannels.raw_out_channel]
Returns the current channel position.
pos_out [Uq_engines.async_out_channel]
Returns the number of characters output into the channel
post_add_hook [Netplex_types.processor_hooks]
A user-supplied function that is called after the service has been added to the controller
post_finish_hook [Netplex_types.processor_hooks]
A user-supplied function that is called after the container is terminated.
post_rm_hook [Netplex_types.processor_hooks]
A user-supplied function that is called after the service has been removed from the controller
post_start_hook [Netplex_types.processor_hooks]
A user-supplied function that is called after the container is created and started, but before the first service request arrives.
pre_finish_hook [Netplex_types.processor_hooks]
A user-supplied function that is called just before the container is terminated.
pre_start_hook [Netplex_types.processor_hooks]
A user-supplied function that is called before the container is created and started.
preferred [Xdr_mstring.mstring]
Whether as_memory or as_string is cheaper
print [Netplex_types.config_file]
print [Nethttpd_types.http_service]
Outputs the definition term to a formatter
prioritized [Uq_engines.prioritizer_t]
let pe = prioritized f p: Queues up f on priority level p.
private_api [Http_client.http_call]
process [Netplex_kit.v_processor]
process [Netplex_types.processor]
A user-supplied function that is called when a new socket connection is established.
process_body [Nethttpd_types.http_service_receiver]
Second stage of HTTP processing: This method is called when the body is expected to be arriving.
process_header [Nethttpd_types.http_service]
First stage of HTTP processing: This method is called when the HTTP header has been received.
process_option_command [Telnet_client.telnet_session]
processor [Netplex_types.socket_service]
A user-supplied object to process incoming connections
program [Netplex_types.plugin]
The RPC program structure on which the messaging bases.
protocol [Rpc_transport.rpc_multiplex_controller]
The protocol encapsulation
protocol [Nethttpd_kernel.http_response]
The HTTP version of the response.
protocol [Netcgi1_compat.Netcgi_env.cgi_environment]
protocol [Netcgi.cgi_environment]
The server protocol in a decoded form.
protocol [Netcgi_common.cgi_environment]
protocols [Netplex_types.socket_service_config]
This list describes the sockets to create in detail
proxy_enabled [Http_client.http_call]
Returns the proxy mode
ptype [Netplex_types.netplex_config]
ptype [Netplex_types.parallelizer]
ptype [Netplex_types.par_thread]
ptype [Netplex_types.container]
The parallelization type actually used for this container
ptype [Netplex_types.controller]
The actually effective parallelization type
put [Uq_engines.cache_t]
Puts a value immediately into the cache.

Q
queue_events [Unixqueue_select.sb_event_system]
quit [Netsmtp.client]
Requests the server to end this session.
quit [Netpop.client]
Requests the server to end this session.

R
rcpt [Netsmtp.client]
Performs a RCPT TO command.
read [Netfs.stream_fs]
read flags filename: Opens the file filename for reading, and returns the input stream.
read [Http_fs.http_stream_fs]
Additional flag: `Header h: Set these headers in the submitted GET request
read_dir [Netglob.glob_fsys]
Returns the file names contained in the directory, without path.
read_eof [Rpc_transport.rpc_multiplex_controller]
Whether the EOF marker has been read
read_eof [Uq_engines.multiplex_controller]
Whether the EOF marker has been read
readdir [Netfs.stream_fs]
Reads the contents of a directory.
readdir [Http_fs.http_stream_fs]
reading [Rpc_transport.rpc_multiplex_controller]
True iff there is a reader
reading [Uq_engines.multiplex_controller]
True iff there is a reader
readlink [Netfs.stream_fs]
Reads the target of a symlink
readlink [Http_fs.http_stream_fs]
really_input [Netchannels.compl_in_channel]
Reads exactly as many octets from the channel as the second int argument specifies.
really_output [Netchannels.compl_out_channel]
Writes exactly as many octets to the channel as the second int argument specifies.
realm [Http_client.key]
The realm
receive [Nethttpd_kernel.http_protocol]
Returns the first req_token from the receive queue.
receive_admin_message [Netplex_types.processor_hooks]
This function is called when a broadcast admin message is received.
receive_admin_message [Netplex_types.ctrl_message_receiver]
This function is called when a broadcast admin message is received.
receive_message [Netplex_types.processor_hooks]
This function is called when a broadcast message is received.
receive_message [Netplex_types.ctrl_message_receiver]
This function is called when a broadcast message is received.
received_from [Uq_engines.datagram_multiplex_controller]
Returns the socket address of the last received datagram.
recommended_jobs_per_thread [Netplex_workload.dynamic_workload_config]
The number of jobs every thread can execute with normal service quality.
recv_queue_byte_size [Nethttpd_kernel.http_protocol]
Returns the (estimated) size of the input queue in bytes
recv_queue_len [Nethttpd_kernel.http_protocol]
Returns the length of the receive queue (number of tokens)
recvfrom [Uq_engines.wrapped_datagram_socket]
Receive data from the (unconnected) socket.
register_lever [Netplex_types.controller]
let id = register_lever f: It is possible to register a function f in the controller, and run it over the internal RPC interface from any container.
reject_body [Nethttpd_reactor.http_reactive_request]
Call this method to unlock the body channels.
release [Netmcore.compute_resource]
Notify the manager that the resource is not used any longer by this process.
remote_socket_addr [Nethttpd_types.request_info]
The socket address of the client.
remote_socket_addr [Nethttpd_types.v_extended_environment]
These are always the physical IP addresses and ports of the two endpoints of the current connection.
remote_socket_addr [Nethttpd_types.extended_environment]
remove [Netsys_pollset.pollset]
Remove a descriptor from the set (if it is member)
remove [Netfs.stream_fs]
Removes the file or symlink.
remove [Http_fs.http_stream_fs]
remove_resource [Unixqueue_select.sb_event_system]
remove_resource [Unixqueue.event_system]
rename [Netfs.stream_fs]
Renames the file.
rename [Http_fs.http_stream_fs]
reopen [Netplex_types.logger]
Reopen the log files
repr [Netsys_oothr.condition]
May be used internally be the implementation
repr [Netsys_oothr.mutex]
May be used internally be the implementation
repr [Netsys_oothr.thread]
May be used internally be the implementation
repr [Netmcore.compute_resource]
the resource detail
representation [Netcgi1_compat.Netcgi_types.cgi_argument]
representation [Netcgi.cgi_argument]
The representation of the argument.
representation [Netcgi_common.cgi_argument]
req_method [Nethttpd_reactor.internal_environment]
req_state [Nethttpd_engine.http_request_notification]
Returns the request processing state which is `Received_request at the moment when this notification is delivered.
req_state [Nethttpd_engine.http_request_header_notification]
Returns the request processing state which is `Received_header at the moment when this notification is delivered.
request [Netcgi_apache.cgi]
The underlying apache request structure.
request_body [Http_client.http_call]
The whole body of the request
request_body_rejected [Nethttpd_types.v_extended_environment]
so far known, or false
request_body_rejected [Nethttpd_types.full_info]
Whether the request body was rejected
request_header [Http_client.http_call]
The whole header of the request.
request_method [Nethttpd_types.request_info]
The method like GET.
request_method [Http_client.http_call]
The HTTP method as string
request_method [Netcgi1_compat.Netcgi_types.cgi_activation]
request_method [Netcgi.cgi]
The HTTP method used to make the request.
request_method [Netcgi_common.cgi]
request_notification [Uq_engines.async_in_channel]
After the notification has been requested, the passed function is be called whenever can_input changes its value (or might change its value).
request_notification [Uq_engines.async_out_channel]
After the notification has been requested, the passed function is be called whenever can_output changes its value (or might change its value).
request_notification [Uq_engines.engine_mixin]
request_notification [Uq_engines.engine]
Requests notification about state changes.
request_notification [Uq_resolver.engine]
request_remote_option [Telnet_client.telnet_session]
request_uri [Nethttpd_types.request_info]
The URI of the client request.
request_uri [Http_client.http_call]
The request URI as string.
reset [Telnet_client.telnet_session]
Closes the connection immediately and empties all queues.
reset [Http_client.pipeline]
Empties the pipeline and inactivates any open connection.
reset_counters [Http_client.pipeline]
reset_local_option [Telnet_client.telnet_session]
reset_remote_option [Telnet_client.telnet_session]
resolve_parameter [Netplex_types.config_file]
resolve_section [Netplex_types.config_file]
resp_queue_len [Nethttpd_kernel.http_protocol]
Returns the length of the internal response queue (number of http_response objects that have not yet fully processed)
response [Nethttpd_reactor.internal_environment]
response_body [Http_client.http_call]
The whole body of the response.
response_body_storage [Http_client.http_call]
How to create the response body.
response_header [Http_client.http_call]
The whole header of the response.
response_protocol [Http_client.http_call]
The HTTP version indicated in the response
response_status [Http_client.http_call]
The decoded code.
response_status_code [Nethttpd_types.error_response_params]
The HTTP status code to response
response_status_code [Nethttpd_types.full_info]
The HTTP status code to response
response_status_code [Http_client.http_call]
The three-digit status code
response_status_text [Http_client.http_call]
The text transmitted along with the code
restart [Netplex_types.socket_controller]
Restarts the containers for this socket service only
restart [Netplex_types.controller]
Initiates a restart of all containers: All threads/processes are terminated and replaced by newly initialized ones.
restart [Uq_engines.poll_engine]
Activate the engine again when it is already in a final state.
restrict_parameters [Netplex_types.config_file]
restrict_subsections [Netplex_types.config_file]
retr [Netpop.client]
Retrieves a message from the server.
rmdir [Netfs.stream_fs]
Removes an empty directory
rmdir [Http_fs.http_stream_fs]
ro [Netmime.mime_header]
whether the header is read-only or not
ro [Netcgi1_compat.Netcgi_types.cgi_argument]
Irrelevant: there are no methods to mutate an argument.
ro [Netmime.mime_body]
whether this body is read-only or not
ro [Netcgi.rw_cgi_argument]
ro [Netcgi_common.rw_cgi_argument]
role [Netcgi_fcgi.cgi]
A FastCGI application can fulfill each of the following three roles:
rollback_work [Netchannels.trans_out_obj_channel]
Empties the transaction buffer
root_addr [Netplex_types.config_file]
root_name [Netplex_types.config_file]
route [Netaddress.mailbox]
The route to the mailbox
rset [Netsmtp.client]
Reset the current transaction
rset [Netpop.client]
Unmarks any messages that have previously been marked as deleted.
run [Netsys_posix.post_fork_handler]
run [Ftp_client.ftp_client]
Starts the event system; same as Unixqueue.run
run [Ftp_client.ftp_client_pi]
Starts the event system; same as Unixqueue.run
run [Telnet_client.telnet_session]
Run the event system
run [Http_client.pipeline]
Runs through the requests in the pipeline.
run [Unixqueue_select.sb_event_system]
run [Unixqueue.event_system]

S
same_call [Http_client.http_call]
This method returns a new object that will perform the same call as this object (this function is called "reload" in browsers).
schedule_accept_body [Nethttpd_engine.http_request_header_notification]
Schedules that the request body is accepted.
schedule_finish [Nethttpd_engine.http_request_notification]
Schedules that the request is finished.
schedule_finish [Nethttpd_engine.http_request_header_notification]
Schedules that the request is finished.
schedule_reject_body [Nethttpd_engine.http_request_header_notification]
Schedules that the request body is rejected.
self [Netsys_oothr.mtprovider]
In a multi-threaded program: Returns the currently running thread.
send [Nethttpd_kernel.http_response]
Add token to the end of the send queue
send_abort [Ftp_client.ftp_client_pi]
Sends immediately an ABOR command, even when a data transfer is in progress.
send_admin_message [Netplex_types.controller]
send_message destination msgname msgargs: Sends an admin message to destination.
send_file [Nethttpd_types.v_extended_environment]
Sends the output header with a file as body.
send_message [Netplex_types.container]
send_message service_pattern msg_name msg_arguments: Sends a message to all services and message receivers matching service_pattern.
send_message [Netplex_types.controller]
send_message destination msgname msgargs: Sends a message to destination.
send_output_header [Netcgi1_compat.Netcgi_env.cgi_environment]
send_output_header [Netcgi.cgi_environment]
This method will encode and send the output header to the output channel.
send_output_header [Netcgi_common.cgi_environment]
send_queue_empty [Nethttpd_kernel.http_response]
Return whether the send queue is empty.
send_synch [Telnet_client.telnet_session]
At the next output oppurtunity, a Synch sequence is sent to the remote peer.
send_to [Uq_engines.datagram_multiplex_controller]
Sets the socket address of the next datagram to send.
sendto [Uq_engines.wrapped_datagram_socket]
Send data over the (unconnected) socket
serialized [Uq_engines.serializer_t]
let se = serialized f: Waits until all the previous engines reach a final state, and then runs e = f esys.
server_accepts [Rpc_client.auth_session]
Called if the server accepts the credentials.
server_address [Uq_engines.server_endpoint_acceptor]
The contact address under which the clients can establish new connections with this server.
server_rejects [Rpc_client.auth_session]
Called if the server rejects the credentials or the verifier (Auth_xxx).
server_socket_addr [Nethttpd_types.request_info]
The socket address of this server.
server_socket_addr [Nethttpd_types.v_extended_environment]
server_socket_addr [Nethttpd_types.extended_environment]
services [Netplex_types.netplex_config]
services [Netplex_types.controller]
The list of controlled services
set [Netcgi_modtpl.template]
Set a variable in the template.
set_arguments [Netcgi1_compat.Netcgi_types.cgi_activation]
set_callback [Nethttpd_kernel.http_response]
The function will be called when either set_state changes the state, or when the send queue becomes empty.
set_callback [Telnet_client.telnet_session]
Sets the callback function.
set_connection [Telnet_client.telnet_session]
Sets the host name and the port of the remote server to contact.
set_connection_cache [Http_client.pipeline]
Set the connection cache.
set_connection_state [Http_client_conncache.connection_cache]
Sets the state of the file descriptor.
set_event_system [Telnet_client.telnet_session]
Sets the event system to use.
set_event_system [Http_client.pipeline]
Sets the event system.
set_exception_handler [Telnet_client.telnet_session]
Sets the exception handler.
set_fields [Netmime.mime_header]
set_header [Netcgi1_compat.Netcgi_types.cgi_activation]
Added ?content_length for user convenience and deprecated ?set_cookie in favor of ?set_cookies for coherence e.g.
set_header [Netcgi.cgi]
Sets the header (removing any previous one).
set_header [Netcgi_common.cgi]
set_input_state [Netcgi1_compat.Netcgi_env.cgi_environment]
Not the user business.
set_max_level [Netplex_types.controller_config]
Set the maximum global log level
set_multiple_output_header_field [Netcgi1_compat.Netcgi_env.cgi_environment]
set_multiple_output_header_field [Netcgi.cgi_environment]
Sets multiple values of a field of the response header.
set_multiple_output_header_field [Netcgi_common.cgi_environment]
set_options [Telnet_client.telnet_session]
Set the configuration options.
set_options [Http_client.pipeline]
Get/Set the available options for the HTTP engine.
set_output_header_field [Netcgi1_compat.Netcgi_env.cgi_environment]
set_output_header_field [Netcgi.cgi_environment]
Sets the value of a field of the response header.
set_output_header_field [Netcgi_common.cgi_environment]
set_output_header_fields [Netcgi1_compat.Netcgi_env.cgi_environment]
set_output_header_fields [Netcgi.cgi_environment]
Sets the complete response header at once.
set_output_header_fields [Netcgi_common.cgi_environment]
set_output_state [Netcgi1_compat.Netcgi_env.cgi_environment]
Not the user business.
set_proxy [Http_client.pipeline]
set_proxy name port: sets that a proxy name listening on port is to be used
set_proxy_auth [Http_client.pipeline]
sets user and password for the proxy.
set_proxy_enabled [Http_client.http_call]
Sets the proxy mode
set_proxy_from_environment [Http_client.pipeline]
Inspect the environment variables http_proxy and no_proxy and set the proxy options from them.
set_realm [Http_client.basic_auth_method]
set_reconnect_mode [Http_client.http_call]
Sets the reconnect mode
set_redirect_mode [Http_client.http_call]
Sets the redirect mode
set_redirection_header [Netcgi1_compat.Netcgi_types.cgi_activation]
set_redirection_header [Netcgi.cgi]
Sets the header such that a redirection to the specified URL is performed.
set_redirection_header [Netcgi_common.cgi]
set_req_header [Http_client.http_call]
set_request_body [Http_client.http_call]
Replaces the whole body object
set_request_header [Http_client.http_call]
Replaces the whole `Base header object
set_request_uri [Http_client.http_call]
Sets the request URI
set_response_body_storage [Http_client.http_call]
Sets how to create the response body
set_state [Nethttpd_kernel.http_response]
Sets the state
set_state [Uq_engines.engine_mixin]
set_status [Netcgi1_compat.Netcgi_env.cgi_environment]
set_status [Netcgi.cgi_environment]
Sets the response status.
set_status [Netcgi_common.cgi_environment]
set_timeout [Rpc_transport.rpc_multiplex_controller]
If there is no read or write activity for the passed number of seconds, the notify callback is invoked.
set_value [Netcgi1_compat.Netcgi_types.cgi_argument]
Dealing with the arguments is the task of an higher order library.
set_value [Netmime.mime_body]
Sets the value.
set_value [Netcgi.rw_cgi_argument]
set_value [Netcgi_common.rw_cgi_argument]
set_var [Netplex_types.container]
Sets the value of a container variable
setup [Unixqueue_select.sb_event_system]
shut_down [Uq_engines.wrapped_datagram_socket]
Close the descriptor, shuts down any further needed resources
shut_down [Uq_engines.server_endpoint_acceptor]
The server endpoint is shut down such that no further connections are possible.
shutdown [Netplex_types.workload_manager]
Called by the controller to notify the manager about a shutdown
shutdown [Netplex_types.container]
Initiates a shutdown of the container.
shutdown [Netplex_types.processor_hooks]
A user-supplied function that is called when a shutdown notification arrives.
shutdown [Netplex_types.socket_controller]
Closes the socket service forever, and initiates a shutdown of all containers serving this type of service.
shutdown [Netplex_types.socket_service]
Shuts down the master sockets
shutdown [Netplex_types.controller]
Initiates a shutdown of all containers.
shutdown [Nethttpd_kernel.http_protocol]
Shuts the socket down.
shutting_down [Uq_engines.multiplex_controller]
True iff the shutdown is in progress
signal [Netsys_oothr.condition]
In a multi-threaded program: Signal one process that the condition holds.
signal [Uq_engines.signal_engine]
single_threaded [Netsys_oothr.mtprovider]
Whether this is a single-threaded program.
size [Netfs.stream_fs]
Returns the size of a file
size [Http_fs.http_stream_fs]
skip [Netstream.in_obj_stream]
Skip the n bytes of the stream.
so_keepalive [Netplex_types.protocol]
Whether to set the keep-alive socket option
socket_directory [Netplex_types.controller_config]
The directory where Unix domain sockets are created.
socket_domain [Uq_engines.wrapped_datagram_socket]
socket_protocol [Uq_engines.wrapped_datagram_socket]
socket_service [Netplex_types.container]
socket_service_config [Netplex_types.socket_service]
The configuration
socket_service_name [Netplex_types.container]
socket_type [Uq_engines.wrapped_datagram_socket]
sockets [Netplex_types.socket_service]
A socket_service consists of a list of supported protocols which are identified by a name.
source [Netcgi_modtpl.template]
Return the original source code for the template.
source [Unixqueue_select.sb_event_system]
spec [Netaddress.mailbox]
The formal address specification
ssl_accepting [Uq_ssl.ssl_multiplex_controller]
Whether the initial SSL handshake is in progress that makes this socket a server.
ssl_connecting [Uq_ssl.ssl_multiplex_controller]
Whether the initial SSL handshake is in progress that makes this socket a client.
ssl_socket [Uq_ssl.ssl_multiplex_controller]
ssl_socket_state [Uq_ssl.ssl_multiplex_controller]
Returns the socket state: `Unset: A fresh socket, `Client: A socket playing the SSL client role, `Server: A socket playing the SSL server role, `Unclean: The socket state is unclean. The socket is no longer usable., `Clean: The SSL connection has been cleanly shut down.
start [Netplex_types.container]
Internal Method.
start_containers [Netplex_types.socket_controller]
start_mem_reading [Uq_engines.multiplex_controller]
Same as start_reading, but puts the data into a memory buffer.
start_mem_writing [Uq_engines.multiplex_controller]
Same as start_writing, but takes the data from a memory buffer.
start_reading [Rpc_transport.rpc_multiplex_controller]
Start reading from the connection.
start_reading [Uq_engines.multiplex_controller]
Start reading from the connection.
start_shutting_down [Rpc_transport.rpc_multiplex_controller]
Start shutting down the connection.
start_shutting_down [Uq_engines.multiplex_controller]
Start shutting down the connection.
start_ssl_accepting [Uq_ssl.ssl_multiplex_controller]
Makes the socket an SSL server socket by initiating the handshake.
start_ssl_connecting [Uq_ssl.ssl_multiplex_controller]
Makes the socket an SSL client socket by initiating the handshake.
start_thread [Netplex_types.parallelizer]
start_thread f l_close l_share name logger: Starts a new thread or process and calls f thread in that context.
start_writing [Rpc_transport.rpc_multiplex_controller]
Starts writing the message.
start_writing [Uq_engines.multiplex_controller]
Start writing to the connection.
start_writing_eof [Uq_engines.multiplex_controller]
Start writing the EOF marker to the connection.
startup_directory [Netplex_types.controller]
The current directory at startup time
startup_timeout [Netplex_types.socket_service_config]
After this many seconds the container must have finished the post_start_hook.
stat [Netpop.client]
Returns information about the current mailbox as tuple (count,size,ext) where count is the number of messages in the mailbox, size is the size of the mailbox in octets, and ext is any server extension data.
state [Netpop.client]
Current state of this session.
state [Netplex_types.socket_controller]
The current state
state [Nethttpd_kernel.http_response]
Reports the state.
state [Ftp_client.ftp_client_pi]
The state in the sense of Uq_engines.
state [Uq_engines.engine_mixin]
state [Uq_engines.engine]
Returns the state of the engine
state [Uq_resolver.engine]
status [Http_client.http_call]
The condensed status
stop_containers [Netplex_types.socket_controller]
store [Netmime.mime_body_ro]
Where the body is actually stored.
store [Netcgi1_compat.Netcgi_types.cgi_argument]
store [Netcgi.cgi_argument]
Tells whether the argument is stored in memory (as a string) or as a file (the argument of `File being the filename).
store [Netcgi_common.cgi_argument]
string_param [Netplex_types.config_file]
supported_ptypes [Netplex_kit.v_processor]
supported_ptypes [Netplex_types.processor]
The supported parallelization types
supports_half_open_connection [Uq_engines.multiplex_controller]
Whether the underlying transport mechanism can close the write side of the connection only (half-open connection).
symlink [Netfs.stream_fs]
symlink flags oldpath newpath: Creates a symlink.
symlink [Http_fs.http_stream_fs]
sys_id [Netplex_types.par_thread]
Returns a system-dependent identifier for the thread: `Thread id: The id as returned by Thread.id, `Process id: The id is the process ID
sys_id [Netplex_types.controller]
The thread running the controller
system [Netplex_types.container]
An RPC client that can be used to send messages to the controller.
system_shutdown [Netplex_types.processor_hooks]
A user-supplied function that is called when a system shutdown notification arrives.

T
table [Netcgi_modtpl.template]
Set a table in the template.
test [Netfs.stream_fs]
Returns whether the test is true.
test [Http_fs.http_stream_fs]
test_coverage [Nethttpd_kernel.http_protocol]
For testing: returns a list of tokens indicating into which cases the program ran.
test_list [Netfs.stream_fs]
Similar to test but this function performs all tests in the list at once, and returns a bool for each test.
test_list [Http_fs.http_stream_fs]
timeout [Nethttpd_kernel.http_protocol]
Process a timeout condition as cycle does
to_channel [Netcgi_modtpl.template]
Write the template to a channel.
to_string [Netcgi_modtpl.template]
Return the template as a string.
top [Netpop.client]
Returns the message header plus a limited number of lines of the message body.
transfer_encoding [Nethttpd_kernel.http_response]
Returns the selected transfer encoding.
tree [Netplex_types.config_file]
try_lock [Netsys_oothr.mutex]
In a multi-threaded program: Tries to immediately lock the mutex, and returns whether the lock could be obtained.
typ [Netmcore.compute_resource]
which type of resource

U
uidl [Netpop.client]
Returns the unique identifier(s) for an optional message number or for all messages in the current mailbox.
unlock [Netsys_oothr.mutex]
In a multi-threaded program: Unlocks a mutex.
unlock [Nethttpd_reactor.internal_environment]
update [Telnet_client.telnet_session]
If there are commands in the output queue, the event system is signaled that this client wants to do network I/O.
update_argument [Netcgi1_compat.Netcgi_types.cgi_activation]
update_detail [Netplex_types.container]
Update the detail string output for the netplex.connections admin message
update_field [Netmime.mime_header]
update_multiple_argument [Netcgi1_compat.Netcgi_types.cgi_activation]
update_multiple_field [Netmime.mime_header]
url [Netcgi1_compat.Netcgi_types.cgi_activation]
url [Netcgi.cgi]
Returns the URL of the current CGI-like script.
url [Netcgi_common.cgi]
The following environment properties must be available for this method to work properly (please make sure your connector provides them; the CGI spec make them compulsory anyway): cgi_server_name, cgi_server_port, cgi_script_name, cgi_path_info
user [Netpop.client]
Specifies the name of the mailbox the client would like to open using plain-text authentication.
user [Http_client.key]
The user name
user_agent [Netcgi1_compat.Netcgi_env.cgi_environment]
user_agent [Netcgi.cgi_environment]
This is a convenience method that returns the "User-agent" field of the HTTP request header.
user_agent [Netcgi_common.cgi_environment]

V
value [Netmime.mime_body_ro]
The value method returns the _decoded_ body, i.e.
value [Netcgi1_compat.Netcgi_types.cgi_argument]
value [Netcgi.cgi_argument]
The value of the argument, after all transfer encodings have been removed.
value [Netcgi_common.cgi_argument]
var [Netplex_types.container]
Returns the value of a container variable or Not_found.

W
wait [Netsys_oothr.condition]
In a multi-threaded program: Wait for the condition to be true and use the mutex to protect this situation.
wait [Netsys_pollset.pollset]
Wait for events, and return the output events matching the event mask.
waiting_for_next_message [Nethttpd_kernel.http_protocol]
Whether the kernel is currently waiting for the beginning of a new arriving HTTP request.
want [Netstream.in_obj_stream]
Increases the length of the window such that the length is at least the passed number of bytes or that the window reaches EOF (whatever happens first).
want_another_block [Netstream.in_obj_stream]
The same as: want block_size
watch_shutdown [Netplex_types.par_thread]
Called by the controller if it thinks the container is down.
window [Netstream.in_obj_stream]
The look-ahead window.
window_at_eof [Netstream.in_obj_stream]
Whether the window is at eof
window_length [Netstream.in_obj_stream]
Returns the length of the window
write [Netfs.stream_fs]
write flags filename: Opens (and optionally creates) the filename for writing, and returns the output stream.
write [Http_fs.http_stream_fs]
Additional flag: `Header h: Set these headers in the submitted PUT request
writing [Rpc_transport.rpc_multiplex_controller]
True iff there is a writer
writing [Uq_engines.multiplex_controller]
True iff there is a writer
wrote_eof [Uq_engines.multiplex_controller]
Whether the EOF marker has been written

Y
yield [Netsys_oothr.mtprovider]
In a multi-threaded program: gives a hint that another thread should better run now.

This web site is published by Informatikbüro Gerd Stolpmann
Powered by Caml