A | |
| Abort [Unixqueue] |
Event handlers can raise this exception to cancel a group
of handlers, events, and resources.
|
| Addressing_method_not_supported [Uq_engines] |
Raised by
client_socket_connector and server_socket_acceptor to
indicate that the passed address is not supported by the class.
|
| Already_installed [Shell_sys] |
Raised when the job handlers are already installed
|
B | |
| Bad_glob_expr [Netglob] |
An syntax error in the glob expression; the argument is the bad
expression
|
| Bad_header_field [Nethttp] |
Raised when a header field cannot be parsed.
|
| Bad_message [Http_client] |
The server sent a message which cannot be interpreted.
|
| Bad_state [Netpop] | |
| Break [Netshm] | |
| Broken_communication [Uq_engines] |
Some engines indicate this error when they cannot continue because the
other endpoint of communication signals an error.
|
| Buffer_underrun [Netchannels] |
Raised by input methods if the internal buffer of the channel is too
empty to read even one byte of data.
|
| Byte_order_mark [Netconversion] |
Raised when it is tried to get the code point of the BOM at the
beginning of the string
|
C | |
| Cancelled [Uq_engines] |
The callback function of a
multiplex_controller is invoked with this
exception if the operation is cancelled.
|
| Cannot_represent [Rtypes] |
raised if a conversion can't be done
(same as
Netnumber.Cannot_represent)
|
| Cannot_represent [Netnumber] |
raised if a conversion can't be done
|
| Cannot_represent [Netconversion] |
Raised when a certain Unicode code point cannot be represented in
the selected output encoding
|
| Client_is_down [Rpc_client] |
The RPC call cannot be performed because the client has been shut down
in the meantime.
|
| Closed_channel [Netchannels] |
Raised when channel operations are called when the channel is closed
|
| Closed_channel [Uq_engines] |
Raised when a method of a closed channel object is called (only channel
methods count).
|
| Cluster_service_unavailable [Rpc_proxy.ManagedSet] |
Raised by
mset_pick when no available endpoint can be found,
or all available endpoints have reached their maximum load.
|
| Command_failure [Netchannels] |
Raised by
close_in or close_out if the channel is connected with
another process, and the execution of that process fails.
|
| Communication_error [Rpc_client] |
an I/O error happened
|
| Config_error [Netplex_config] | |
| Connection_lost [Rpc_server] |
raised by the 'reply' function if the connection to the original caller
has been lost in the meantime.
|
| Container_variable_not_found [Netplex_cenv] |
The variable does not exist
|
| Container_variable_type_mismatch [Netplex_cenv] |
The (dynamically typed) variable has the wrong type
|
| Corrupt_file [Netshm] |
Raised when a violation of the object format is detected
|
| Cursor_out_of_range [Netconversion] |
Raised when it is tried to move the cursor beyond the beginning of the
string or beyond the end of the string.
|
D | |
| Deadlock [Netshm] |
Raised when a deadlock situation was detected.
|
| Dest_failure [Xdr] |
raised if the dest_* function are applied to non-matching xdr_value
|
E | |
| Empty [Netmcore_queue] |
Raised when the queue is empty and the operation cannot be done
|
| Empty [Netcamlbox] | |
| End_of_string [Netconversion] |
Raised when it is tried to access the character after the end of the
string (at position
n_max)
|
| Err_status [Netpop] | |
| Error [Rpc_transport] |
Passed back as
`Error.
|
| Error [Netulex.Ulexing] |
Lexical error
|
| Executable_not_found [Shell_sys] |
Raised when an executable file cannot be found; the argument is the
search name
|
| Extensions_not_supported [Netmech_scram] |
Raised by clients when the server enables an unsupported extension.
|
F | |
| FTP_error [Ftp_client] |
Something went wrong, often on socket level
|
| FTP_method_perm_failure [Ftp_client] | |
| FTP_method_temp_failure [Ftp_client] | |
| FTP_method_unexpected_reply [Ftp_client] |
These exceptions may be raised during execution by the FTP method.
|
| FTP_protocol_violation [Ftp_client] |
The server violates the FTP specification
|
| FTP_timeout [Ftp_client] |
A timeout on the control or data connection (this is a fatal error)
|
| Fatal_error [Shell_sys] |
An error is fatal if it is not possible to recover from it in a
predictable manner.
|
H | |
| HTTP [Netcgi_common] |
Exception raised by various functions of this library to return
to the user agent an appropriate error page with the specified
http-status (this exception must be caught by the connector and
a default answer sent).
|
| Host_not_found [Uq_resolver] |
This host cannot be resolved
|
| Http_error [Http_client] |
Deprecated.
|
| Http_protocol [Http_client] |
The request could not be processed because the exception condition
was raised.
|
I | |
| Immutable [Netmime] |
Raised if it is tried to modify a read-only value.
|
| Integrity_error [Netmech_scram.Cryptosystem] | |
| Invalid_encoding [Netmech_scram] |
Raised by clients when something cannot be decoded.
|
| Invalid_server_signature [Netmech_scram] |
Raised by clients when the signature sent by the server is invalid
(i.e.
|
| Invalid_username_encoding [Netmech_scram] |
Raised by clients when the username does not match the requirements.
|
K | |
| Keep_call [Rpc_client] |
This exception can be raised by the callback function that is invoked
when the server response arrives.
|
| Key_service_problem [Rpc_key_service] |
All exceptions (except the exceptions defined above) are wrapped into
Key_service_problem.
|
L | |
| Late_drop [Rpc_server] |
This can be raised in encryption/decryption functions to prevent
that a response is sent.
|
| Line_too_long [Mimestring] |
Raised when the hard limit of the line length is exceeded
|
| Line_too_long [Uq_io] |
May be raised by
Uq_io.input_line_e
|
M | |
| Malformed_URL [Neturl] |
Raised by a number of functions when encountering a badly formed
URL.
|
| Malformed_code [Netconversion] |
Raised when an illegal byte sequence is found
|
| Malformed_code_at [Netconversion] |
An illegal byte sequence is found at this byte position
|
| Mem_not_supported [Uq_engines] |
May be raised by multiplex controller methods
start_mem_reading and
start_mem_writing if these methods are not supported for the kind
of file descriptor
|
| Message_lost [Rpc_client] |
got EOF when some pending procedure calls were not replied or even sent
|
| Message_timeout [Rpc_client] |
After all retransmissions, there was still no reply
|
| Message_too_big [Netcamlbox] | |
N | |
| Name_resolution_error [Http_client] |
Could not resolve this name - same as
Uq_engines.Host_not_found
|
| Netname_unknown [Rpc_key_service] |
The netname is invalid
|
| Next [Netshm] | |
| No_Unix_process_group [Shell_sys] |
Raised by functions referring to Unix process groups when the
job has not been started in its own process group.
|
| No_reply [Http_client] |
There was no response to the request because some other request failed
earlier and it was not allowed to send the request again.
|
| No_resource [Netmcore] |
No such resource, or no resource of the expected type
|
| No_secret_key [Rpc_key_service] |
The user does not have a secret key for the netname
|
| Not_implemented [Netcgi1_compat] |
Raised by some functions/exceptions when a feature of the old model
cannot be implemented in the new model or vice versa
|
| Not_in_container_thread [Netplex_cenv] |
Raised when the caller's thread is not a container thread
|
O | |
| Out_of_handlers [Equeue] |
Raised by
run when the event source adds new events to the queue
but there are no event handlers to process them
|
| Out_of_pool_memory [Netmcore_mempool] | |
| Out_of_range [Rtypes] |
raised if string position out of range
(same as
Netnumber.Out_of_range)
|
| Out_of_range [Netnumber] |
raised if string position out of range
|
| Out_of_space [Netsys_mem] | |
| Oversized [Netcgi.Argument] | |
| Oversized [Netcgi_common] | |
P | |
| Parse_error [Netaddress] |
A parsing error.
|
| Partial_character [Netconversion] |
Raised when the last character of the string is an incomplete
multi-byte character, and it is tried to get the code point
(using
uchar_at).
|
| Permanent_error [Netsmtp] | |
| Protocol_error [Netsmtp] | |
| Protocol_error [Netpop] | |
| Protocol_error [Netmech_scram] |
Raised by clients when the server violates the protocol.
|
| Proxy_error [Http_client] |
An error status from a proxy.
|
R | |
| Recv_queue_empty [Nethttpd_kernel] | |
| Redirect_request [Nethttpd_types] |
The "early" redirect is only allowed in stage 1 of HTTP processing.
|
| Redirect_response [Nethttpd_types] |
The "late" redirect is only allowed in stage 3 of HTTP processing.
|
| Reject [Equeue] |
May be raised by event handlers to reject events
|
| Response_dropped [Rpc_client] |
Drop reason: The response exceeded the configured maximum message size
|
| Response_too_large [Http_client] |
The length of the response exceeds the configured maximum
|
| Rpc_cannot_unpack [Rpc] |
RPC protocol error (bad data)
|
| Rpc_server [Rpc] |
an exception generated by the RPC server
|
S | |
| Send_queue_empty [Nethttpd_kernel] | |
| Server_error [Netmech_scram] |
Raised by clients when the server sent an error code
|
| Service_unavailable [Rpc_proxy.ManagedClient] |
Procedure calls may end with this exception when the reliability
cache disables the service
|
| Sharedvar_no_permission [Netplex_sharedvar] |
It is not allowed to set the value
|
| Sharedvar_not_found [Netplex_sharedvar] |
The variable does not exist.
|
| Sharedvar_null [Netplex_sharedvar] |
The initial value of a shared exception variable
|
| Sharedvar_type_mismatch [Netplex_sharedvar] |
The (dynamically typed) variable has the wrong type (string/exn)
|
| Shutdown_not_supported [Netsys] |
See
gshutdown
|
| Socks_error [Uq_socks5] |
Raised when error messages of the SOCKS proxy are received, or
because of other SOCKS-related problems.
|
| Ssl_error [Uq_ssl] |
Used in
when_done callbacks to indicate an SSL-specific error code
|
| Standard_response [Nethttpd_types] |
Some HTTP containers allow you to raise this exception.
|
| Subprocess_error [Shell] |
The string contains the called commands in a readable representation.
|
T | |
| Telnet_protocol [Telnet_client] |
Wrapper for exceptions that already passed the exception handler.
|
| Terminate [Equeue] |
May be raised by event handlers to accept events while terminating
themselves
|
| Time_not_available [Rpc_time] | |
| Timeout [Http_client] |
A timeout.
|
| Timeout [Uq_engines] |
Used by
input_engine and output_engine to indicate timeouts
|
| Too_many_arguments [Netcgi_common] |
Hit the limit
max_arguments
|
| Too_many_descriptors [Netsys_pollset_win32] | |
| Too_many_redirections [Http_client] |
While following redirections the limit has been reached
|
| Transient_error [Netsmtp] | |
| Type_mismatch [Netplex_encap] |
Raised when an encapulated type is tried to be unwrapped by the
wrong encapsulation module
|
U | |
| URL_syntax_error [Http_client] |
This URL cannot be parsed after a redirection has been followed.
|
| Unbound_exception [Rpc_client] |
This exception can be raised by the callback function that is invoked
when the server response arrives.
|
| Unsupported_expr [Netglob] |
The notations
:class:, .symbol., =eqclass= inside ... are
not supported by this implementation.
|
W | |
| Watchdog_timeout [Uq_engines] |
Used by the watchdog engine to indicate a timeout.
|
X | |
| Xdr_failure [Xdr] |
Usually a problem during packing
|
| Xdr_format [Xdr] |
Format error found during unpacking a string
|
| Xdr_format_message_too_long [Xdr] |
The message is too long and cannot be packed into a string
|
