(* $Id: uq_io.mli 1665 2011-08-30 17:37:57Z gerd $ *) (** Unified engines for stream I/O *) type in_buffer type out_buffer (** Buffers that can be attached to a [device] to get buffered I/O *) type in_device = [ `Polldescr of Netsys.fd_style * Unix.file_descr * Unixqueue.event_system | `Multiplex of Uq_engines.multiplex_controller | `Async_in of Uq_engines.async_in_channel * Unixqueue.event_system | `Buffer_in of in_buffer | `Count_in of (int -> unit) * in_device ] (** Currently supported devices for input: - [`Polldescr(st,fd,esys)]: The [poll] system call is used with file descriptor [fd] to wait for incoming data. The event system [esys] is the underlying event queue. This works well for pipes, sockets etc. but not for normal files. The style [st] can be obtained from [fd] via {!Netsys.get_fd_style}. - [`Multiplex mplex]: The multiplex controller [mplex] is used as device. - [`Buffer buf]: Data comes from the buffer [buf] (which in turn is connected with a second device) - [`Count_in(f,d)]: Data is read from [d], and every time a few bytes [n] are read the function [f n] is called (which may raise an exception) Generally, it is not well supported to read in parallel several times from the same device. *) (* Idea: `Serial of in_device *) type out_device = [ `Polldescr of Netsys.fd_style * Unix.file_descr * Unixqueue.event_system | `Multiplex of Uq_engines.multiplex_controller | `Async_out of Uq_engines.async_out_channel * Unixqueue.event_system | `Buffer_out of out_buffer | `Count_out of (int -> unit) * out_device ] (** Currently supported devices for output: - [`Polldescr(fd,esys)]: The [poll] system call is used with file descriptor [fd] to wait until data can be output. The event system [esys] is the underlying event queue. This works well for pipes, sockets etc. but not for normal files. - [`Multiplex mplex]: The multiplex controller [mplex] is used as device. - [`Buffer buf]: Data is written to the buffer [buf] (which in turn is connected with a second device) - [`Count_out(f,d)]: Data is written to [d], and every time a few bytes [n] are written the function [f n] is called (which may raise an exception) Generally, it is not well supported to write in parallel several times to the same device. *) type in_bdevice = [ `Buffer_in of in_buffer ] (** Devices with look-ahead *) type string_like = [ `String of string | `Memory of Netsys_mem.memory ] (** The user can pass data buffers that base either on strings or on bigarrays of char (memory). Note that [`Memory] is not supported for all devices or device configurations. *) val device_supports_memory : [ in_device | out_device ] -> bool (** Returns whether [`Memory] buffers are supported *) exception Line_too_long (** May be raised by {!Uq_io.input_line_e} *) (** {2 Input} *) val input_e : [< in_device ] -> string_like -> int -> int -> int Uq_engines.engine (** [let e = input_e d s pos len]: Reads data from [d] and puts it into the string [s] starting at [pos] and with maximum length [len]. When data is available, the engine [e] transitions to [`Done n] where [n] is the number of actually read bytes. If [len>0] and no bytes can be read because the end is reached, the engine transitions to [`Error End_of_file]. *) val really_input_e : [< in_device ] -> string_like -> int -> int -> unit Uq_engines.engine (** [let e = input_e d s pos len]: Reads data from [d] and puts it into the string [s] starting at [pos] and with length [len]. Exactly [len] bytes are read, and when done, the engine [e] transitions to [`Done ()]. If the end of the file is reached before [len] bytes are read, the engine transitions to [`Error End_of_file]. *) val input_line_e : ?max_len:int -> in_bdevice -> string Uq_engines.engine (** [let e = input_line_e d]: Reads the next line from [d] and transitions to [`Done line] when done. Note that this is only supported for a buffered device! If the end of the file is already reached when this function is called, the engine transitions to [`Error End_of_file]. If [max_len] is set, this is the maximum length of the line (including LF). If exceeded, the engine transitions to [`Error Line_too_long]. *) val input_lines_e : ?max_len:int -> in_bdevice -> string list Uq_engines.engine (** [let e = input_lines_e d]: Reads as many lines from [d] as can be found in the buffer of [d], and transitions to [`Done lines]. If no complete line is in the buffer, the function extends the buffer and waits until at least one line is added to the buffer (if necessary, this process is repeated). If the end of the file is already reached when this function is called, the engine transitions to [`Error End_of_file]. The function never returns an empty list of lines. [input_lines_e] is just an optimized version of [input_line_e] that requires fewer and cheaper blitting operations. If [max_len] is set, this is the maximum length of the line (including LF). If exceeded, the engine transitions to [`Error Line_too_long]. *) val eof_as_none : 'a Uq_engines.final_state -> 'a option Uq_engines.final_state (** Represents EOF as [None]. Useful in the combination {[ input_e d s p l >> eof_as_none ]} and {[ input_line_e d >> eof_as_none ]} where [>>] is from {!Uq_engines.Operators} *) (** {2 Output} *) val output_e : [< out_device ] -> string_like -> int -> int -> int Uq_engines.engine (** [let e = output_e d s pos len]: Outputs data to [d] and takes it from the string [s] starting at [pos] and with maximum length [len]. When data is written, the engine [e] transitions to [`Done n] where [n] is the number of actually written bytes. *) val really_output_e : [< out_device ] -> string_like -> int -> int -> unit Uq_engines.engine (** [let e = really_output_e d s pos len]: Outputs data to [d] and takes it from the string [s] starting at [pos] and with length [len]. When all data is written, the engine [e] transitions to [`Done ()]. *) val output_string_e : [< out_device ] -> string -> unit Uq_engines.engine (** [let e = output_string_e d s]: Outputs the string [s] to [d], and transitions to [`Done()] when done. *) val output_memory_e : [< out_device ] -> Netsys_mem.memory -> unit Uq_engines.engine (** [let e = output_string_e d m]: Outputs the bigarray [m] to [d], and transitions to [`Done()] when done. *) val output_netbuffer_e : [< out_device ] -> Netbuffer.t -> unit Uq_engines.engine (** [let e = output_string_e d b]: Outputs the contents of [b] to [d], and transitions to [`Done()] when done. *) val write_eof_e : [< out_device ] -> bool Uq_engines.engine (** [let e = write_eof_e d]: For devices supporting half-open connections, this engine writes the EOF marker and transitions to [`Done true]. For other devices nothing happens, and the engine transitions to [`Done false]. (In the latter case, the only way to signal EOF is to shut down the device, see below.) Note that the effect of [write_eof_e] cannot be buffered. Because of this, the [io_buffer] flushes all data first (i.e. [write_eof_e] implies the effect of [flush_e]). *) val copy_e : ?small_buffer:bool -> ?len:int -> ?len64:int64 -> [< in_device ] -> [< out_device ] -> int64 Uq_engines.engine (** [let e = copy_e d_in d_out]: Copies data from [d_in] to [d_out], and transitions to [`Done n] when all data is copied (where [n] are the number of copied bytes). By default, [d_in] is read until end of file. If [len] is passed, at most this number of bytes are copied. The length can also be given as [int64] in [len64]. By setting [small_buffer], the copy buffer consists only of a single page. Normally, a bigger buffer is allocated. *) val flush_e : [< out_device ] -> unit Uq_engines.engine (** [let e = flush_e d]: If [d] has an internal buffer, all data is written out to [d]. If there is no such buffer, this is a no-op. When done, the engine transitions to [`Done()]. *) (** {2 Shutdown} *) (** The shutdown is the last part of the protocol. Although it is often done autonomously by the kernel, this interface supports user-implemented shutdowns (e.g. for SSL). The shutdown can be skipped, and the device can be inactivated immediately. For some devices, the other side of the I/O stream will then see an error, though. The shutdown is always for both the input and the output circuit of the device. *) val shutdown_e : ?linger:float -> [< in_device | out_device ] -> unit Uq_engines.engine (** Performs a regular shutdown of the device. The [linger] argument may be used to configure a non-default linger timeout. The engine transitions to [`Done()] when done. The shutdown also releases the OS resources (closes the descriptor etc.), but only if successful. Note that the effect of [shutdown_e] cannot be buffered. Because of this, the [io_buffer] flushes all data first (i.e. [shutdown_e] implies the effect of [flush_e]). Input data available in the buffer can still be read after the shutdown. *) val inactivate : [< in_device | out_device ] -> unit (** Releases the OS resources immediately. This is the right thing to do when aborting the communication, or for cleanup after an I/O error. It is wrong to inactivate after a successful shutdown, because the shutdown already includes the inactivation. *) (** {2 Buffers} *) val create_in_buffer : ?small_buffer:bool -> [< in_device ] -> in_buffer (** Provides a buffered version of the [in_device]. By setting [small_buffer], the initial input buffer consists only of a single page. Normally, a bigger buffer is allocated. *) val in_buffer_length : in_buffer -> int (** The length *) val in_buffer_blit : in_buffer -> int -> string_like -> int -> int -> unit (** Blit to a string or memory buffer *) val in_buffer_fill_e : in_buffer -> bool Uq_engines.engine (** Requests that the buffer is filled more than currently, and transitions to [`Done eof] when there is more data, or the EOF is reached (eof=true). *) val create_out_buffer : ?small_buffer:bool -> max:int option -> [< out_device ] -> out_buffer (** Provides a buffered version of the [out_device]. The argument [max] is the maximum number of bytes to buffer. This can also be set to [None] meaning no limit. By setting [small_buffer], the initial output buffer consists only of a single page. Normally, a bigger buffer is allocated. *) val filter_out_buffer : max:int option -> Netchannels.io_obj_channel -> [< out_device ] -> out_buffer (** [filter_out_buffer ~max p d]: The data written to this device is redirected via pipe [p] and finally written to [d]. *)