Cppo: cpp for OCaml
===================
Cppo is an equivalent of the C preprocessor for OCaml programs.
It allows the definition of simple macros and file inclusion.
Cppo is:
* more OCaml-friendly than cpp
* easy to learn without consulting a manual
* reasonably fast
* simple to install and to maintain
User guide
----------
Cppo is a preprocessor for programming languages that follow lexical rules
compatible with OCaml.
Cppo supports a number of directives. A directive is a `#` sign placed
at the beginning of a line, possibly preceded by some whitespace, and followed
by a valid directive name or by a number:
```ocaml
BLANK* "#" BLANK* ("define"|"undef"
|"if"|"ifdef"|"ifndef"|"else"|"elif"|"endif"
|"include"
|"warning"|"error"
|"ext"|"endext") ...
```
Directives can be split into multiple lines by placing a backslash `\` at
the end of the line to be continued. In general, any special character
can used as a normal character by preceding it with backslash.
File inclusion
--------------
```ocaml
#include "hello.ml"
```
This is how a source file `hello.ml` can be included.
Relative paths are searched first in the directory of the current file
and then in the search paths added on the command line using `-I`, if any.
Macros
------
This is a simple macro that doesn't take an argument ("object-like
macro" in the cpp jargon):
```ocaml
#define Ms Mississippi
match state with
Ms -> true
| _ -> false
```
After preprocessing by cppo, the code above becomes:
```ocaml
match state with
Mississippi -> true
| _ -> false
```
If needed, defined macros can be undefined. This is required prior to
redefining a macro:
```ocaml
#undef X
```
An important distinction with cpp is that only previously-defined
macros are accessible. Defining, undefining or redefining a macro has
no effect on how previous macros will expand.
Macros can take arguments ("function-like macro" in the cpp
jargon). Both in the definition (`#define`) and in macro application the
opening parenthesis must stick to the macro's identifier:
```ocaml
#define debug(args) if !debugging then Printf.eprintf args else ()
debug("Testing %i" (1 + 1))
```
is expanded into:
```ocaml
if !debugging then Printf.eprintf "Testing %i" (1 + 1) else ()
```
Here is a multiline macro definition. Newlines occurring between
tokens must be protected by a backslash:
```ocaml
#define repeat_until(action,condition) \
action; \
while not (condition) do \
action \
done
```
All user-definable macros are constant. There are however two
predefined variable macros: `__FILE__` and `__LINE__` which take the value
of the position in the source file where the macro is being expanded.
```ocaml
#define loc (Printf.sprintf "File %S, line %i" __FILE__ __LINE__)
```
Macros can be defined on the command line as follows:
```ocaml
# preprocessing only
cppo -D 'VERSION 1.0' example.ml
# preprocessing and compiling
ocamlopt -c -pp "cppo -D 'VERSION 1.0'" example.ml
```
Conditionals
------------
Here is a quick reference on conditionals available in cppo. If you
are not familiar with `#ifdef`, `#ifndef`, `#if`, `#else` and `#elif`, please
refer to the corresponding section in the cpp manual.
```ocaml
#ifndef VERSION
#warning "VERSION is undefined"
#define VERSION "n/a"
#endif
#ifndef VERSION
#error "VERSION is undefined"
#endif
#if OCAML_MAJOR >= 3 && OCAML_MINOR >= 10
...
#endif
#ifdef X
...
#elif defined Y
...
#else
...
#endif
```
The boolean expressions following `#if` and `#elif` may perform arithmetic
operations and tests over 64-bit ints.
Boolean expressions:
* `defined` ... followed by an identifier, returns true if such a macro exists
* `true`
* `false`
* `(` ... `)`
* ... `&&` ...
* ... `||` ...
* `not` ...
Arithmetic comparisons used in boolean expressions:
* ... `=` ...
* ... `<` ...
* ... `>` ...
* ... `<>` ...
* ... `<=` ...
* ... `>=` ...
Arithmetic operators over signed 64-bit ints:
* `(` ... `)`
* ... `+` ...
* ... `-` ...
* ... `*` ...
* ... `/` ...
* ... `mod` ...
* ... `lsl` ...
* ... `lsr` ...
* ... `asr` ...
* ... `land` ...
* ... `lor` ...
* ... `lxor` ...
* `lnot` ...
Macro identifiers can be used in place of ints as long as they expand
to an int literal, e.g.:
```ocaml
#define one 1
#if one + one <> 2
#error "Something's wrong."
#endif
```
Source file location
--------------------
Location directives are the same as OCaml and are echoed in the
output. They consist of a line number optionally followed by a file name:
```ocaml
# 123
# 456 "source"
```
Messages
--------
Warnings and error messages can be produced by the preprocessor:
```ocaml
#ifndef X
#warning "Assuming default value for X"
#define X 1
#elif X = 0
#error "X may not be null"
#endif
```
Calling an external processor
-----------------------------
Cppo provides a mechanism for converting sections of a file using
and external program. Such a section must be placed between `#ext` and
`#endext` directives.
```bash
$ cat foo
ABC
#ext lowercase
DEF
#endext
GHI
#ext lowercase
KLM
NOP
#endext
QRS
$ cppo -x lowercase:'tr "[A-Z]" "[a-z]"' foo
# 1 "foo"
ABC
def
# 5 "foo"
GHI
klm
nop
# 10 "foo"
QRS
```
In the example above, `lowercase` is the name given on the
command-line to external command `'tr "[A-Z]" "[a-z]"'` that reads
input from stdin and writes its output to stdout.
Escaping
--------
The following characters can be escaped by a backslash when needed:
```ocaml
(
)
,
#
```
In OCaml `#` is used for method calls. It is usually not a problem
because in order to be interpreted as a preprocessor directive, it
must be the first non-blank character of a line and be a known
directive. If an object has a define method and you want `#` to appear
first on a line, you would have to use `\#` instead:
```ocaml
obj
\#define
```
Line directives in the usual format supported by OCaml are correctly
interpreted by cppo.
Comments and string literals constitute single tokens even when they
span across multiple lines. Therefore newlines within string literals
and comments should remain as-is (no preceding backslash) even in a
macro body:
```ocaml
#define welcome \
"**********
*Welcome!*
**********
"
```
Concatenation
-------------
`CONCAT()` is a predefined macro that takes two arguments, removes any
whitespace between and around them and fuses them into a single identifier.
The result of the concatenation must be a valid identifier of the
form [A-Za-z_][A-Za-z0-9_]+ or [A-Za-z], or empty.
For example,
```ocaml
#define x 123
CONCAT(z, x)
```
expands into:
```ocaml
z123
```
However the following is illegal:
```ocaml
#define x 123
CONCAT(x, z)
```
because 123z does not form a valid identifier.
`CONCAT(a,b)` is roughly equivalent to `a##b` in cpp syntax.
Stringification
---------------
`STRINGIFY()` is a predefined macro that takes one argument,
removes any leading and trailing whitespace, reduces each internal
whitespace sequence to a single space character and produces
a valid OCaml string literal.
For example,
```ocaml
#define TRACE(f) Printf.printf ">>> %s\n" STRINGIFY(f); f
TRACE(print_endline) "Hello"
```
is expanded into:
```ocaml
Printf.printf ">>> %s\n" "print_endline"; print_endline "Hello"
```
`STRINGIFY(x)` is the equivalent of `#x` in cpp syntax.
Ocamlbuild plugin
------------------
An ocamlbuild plugin is available. To use it, you can call ocamlbuild with the argument `--plugin-tag package(cppo_ocamlbuild)` (only since 4.01).
With Oasis :
```
OCamlVersion: >= 4.01
AlphaFeatures: ocamlbuild_more_args
XOCamlbuildPluginTags: package(cppo_ocamlbuild)
```
After that, you need to add in your `myocamlbuild.ml` :
```ocaml
let () =
Ocamlbuild_plugin.dispatch
(fun hook ->
Ocamlbuild_cppo.dispatcher hook ;
)
```
The plugin will apply cppo on all files ending in `.cppo.ml` in order to produce`.ml` files. The following tags are available:
* `cppo_D(X)` ≡ `-D X`
* `cppo_U(X)` ≡ `-U X`
* `cppo_q` ≡ `-q`
* `cppo_s` ≡ `-s`
* `cppo_n` ≡ `-n`
* `cppo_x(NAME:CMD_TEMPLATE)` ≡ `-x NAME:CMD_TEMPLATE`
* The tag `cppo_I(foo)` can behave in two way:
* If `foo` is a directory, it's equivalent to `-I foo`.
* If `foo` is a file, it adds `foo` as a dependency and apply `-I parent(foo)`.
Detailed command-line usage and options
---------------------------------------
```
Usage: ./cppo [OPTIONS] [FILE1 [FILE2 ...]]
Options:
-D DEF
Equivalent of interpreting '#define DEF' before processing the
input
-U IDENT
Equivalent of interpreting '#undef IDENT' before processing the
input
-I DIR
Add directory DIR to the search path for included files
-o FILE
Output file
-q
Identify and preserve camlp4 quotations
-s
Output line directives pointing to the exact source location of
each token, including those coming from the body of macro
definitions. This behavior is off by default.
-n
Do not output any line directive other than those found in the
input (overrides -s).
-version
Print the version of the program and exit.
-x NAME:CMD_TEMPLATE
Define a custom preprocessor target section starting with:
#ext "NAME"
and ending with:
#endext
NAME must be a lowercase identifier of the form [a-z][A-Za-z0-9_]*
CMD_TEMPLATE is a command template supporting the following
special sequences:
%F file name (unescaped; beware of potential scripting attacks)
%B number of the first line
%E number of the last line
%% a single percent sign
Filename, first line number and last line number are also
available from the following environment variables:
CPPO_FILE, CPPO_FIRST_LINE, CPPO_LAST_LINE.
The command produced is expected to read the data lines from stdin
and to write its output to stdout.
-help Display this list of options
--help Display this list of options
```
Author
------
Martin Jambon <martin@mjambon.com>
