Plasma GitLab Archive
Projects Blog Knowledge

Pfs_nn_fsys



/* $Id: pfs_nn_fsys.x 449 2011-10-11 09:12:04Z gerd $ -*- c -*- */

Filesystem

Filesystem access


#include "pfs_types.x"

#ifndef PFS_NN_FSYS
#define PFS_NN_FSYS

program Filesystem {
    version V1 {

null


	void null(void) = 0;

Transactions

Many procedures are run inside a transaction. A transaction is identified by a trans_id which can be freely chosen by the client. A client may open several transactions simultaneously.

When the TCP connection is closed, all open transactions are implicitly aborted.

Transacted operations must not overlap! This means when an op is started, the next op of the same transaction can be first called when the previous one sent the result back.

Transaction isolation: Only committed changes are visible from other transactions ("read committed"). For block lists, there is even a stronger guarantee. Once a block is returned to the client in a transaction, a competing delete request for this block is not immediately visible, but delayed until the transaction finishes that expects the block to exist. This is equivalent to a "repeatable read" isolation level.

Conflicting changes of the same piece of data or metadata can be resolved in various ways:

  • If the inode is directly modified (via update_inodeinfo), or if blocks are allocated or freed, the inode is locked for the rest of the transaction, so that no other transaction can change the inode in parallel. The other transaction will get an ECONFLICT error.
  • The inode can also be indirectly modified, e.g. mtime updates because data is written. These modifications do not lock the inode. In these cases, the last commit wins, and overwrites the changes of previous commits.
  • Directories have a different locking system. A file name can be locked in three different ways: An existence lock ensures that no other transaction can delete it. For example, this kind of lock is acquired for the path of a directory before a file is created in that directory. A creation lock is acquired for files that are created exclusively. An unlink lock is acquired for files that are going to be deleted.

Read accesses usually do not acquire locks. However, there are some exceptions, and these are explained for each RPC.

Inode numbers are unique.

begin_transaction


	rvoid begin_transaction(trans_id) = 1;

Starts a new transaction

commit_transaction


	rvoid commit_transaction(trans_id) = 2;

Commits a transaction and makes its effects permanent. At commit time, there cannot be any logical inconsistencies that would prevent it. However, a commit may fail when data cannot be physically written out.

abort_transaction


	rvoid abort_transaction(trans_id) = 3;

Aborts the transaction

Inodes

get_inodeinfo


	rinodeinfo get_inodeinfo(trans_id, hyper) = 4;
get_inodeinfo(tid, inode): Returns the inodeinfo struct for the inode with the ID inode.

allocate_inode


	rhyper allocate_inode(trans_id, inodeinfo) = 5;
allocate_inode(tid, ii): Creates a new inode and initializes the inodeinfo struct to ii. The inode is locked.

Note that latest at commit time an inode must be associated with at least one file name. Otherwise it is implicitly deleted.

update_inodeinfo


	rvoid update_inodeinfo(trans_id, hyper, inodeinfo) = 6;
update_inodeinfo(tid, inode, ii): Updates the inodeinfo struct of inode to ii. The inode is locked for that.

Only updates of these fields are possible: usergroup, mode, eof, mtime, ctime, replication, field1, create_verifier. An update of replication does only change the required replication, but not the actual replication.

The seqno field cannot be modified.

delete_inode


	rvoid delete_inode(trans_id, hyper) = 7;
delete_inode(tid, inode): Deletes the inode. The inode is locked for that.

Block lists

get_blocks


	rblocklist get_blocks(trans_id, hyper, hyper, hyper, bool) = 8;
get_blocks(tid, inode, index, len, pin): Get information about blocks index to index+len-1 of the inode. There may be several blockinfo structs for an index if the block is replicated.

If the pin flag is set, the returned blocks contain the datanode tickets needed to actually retrieve the blocks, which are guaranteed to exist if a competing transaction requests their deletion, and even if the delete is committed. This guarantee is valid for the duration of the transaction tid. This means that deletes may be delayed for the time there are still transactions expecting the blocks to exist. Without pin the returned block list may already be outdated when the caller receives it. As a consequence of this it is not allowed to retrieve the blocks. This type of call can still be useful to get information about the physical location of the blocks. Implementing pin has some cost, so it is allowed to turn this feature off.

allocate_blocks


	rblocklist allocate_blocks(trans_id, hyper, hyper, hyper, bool,
				   longstrings) = 9;
allocate_blocks(tid, inode, index, len, set_mtime, data_pref): Allocate new blocks for the range index to index+len-1. Old blocks in this range are freed. Blocks are allocated on various nodes respecting the replication policy. The inode is locked.

set_mtime: Whether to set mtime to the server time.

data_pref: These datanodes are preferred for storing the blocks. The nodes must be given as identity names. This list is only a suggestion. For every block it is tried to allocate it on one of the preferred nodes, even if the allocation becomes unbalanced. However, if it is not possible to follow the suggestion it is ignored. If a node name cannot be identified, the element of data_pref is silently ignored. This parameter is mostly useful to make it highly likely that blocks are stored locally - on the same machine as the machine runnning the requesting client.

It is only allowed to allocate blocks for regular files.

free_blocks


	rvoid free_blocks(trans_id, hyper, hyper, hyper, bool) = 10;
free_blocks(tid, inodenr, index, len, set_mtime): Frees the blocks index to index+len-1. It is not an error to free a block that was not allocated. The inode is locked.

set_mtime: Whether to set mtime to the server time.

statistics

get_fsstat


	rfsstat get_fsstat(void) = 11;

replication control

rereplicate


	rvoid rereplicate(trans_id, hyper) = 12;
	/* replicate(inode): Fixes the replication */
	/* not yet implemented */

Misc

get_blocksize


	int get_blocksize(void) = 13;
returns the blocksize

get_params


	params get_params(void) = 35;
returns some parameters as (name,value) tuples:
  • clustername: the name of the cluster
  • coordinator: the host name of the coordinator
  • blocksize: the value is the blocksize as decimal number
  • lock_timeout: for how long transactions should be repeated after ECONFLICT
  • replication: the default replication factor
  • data_security_level: how to access the datanodes: "none", "auth", "int", "priv"
  • data_timeout: the timeout in seconds for accessing the data nodes (integer decimal number)

Directories and filenames

An existing inode can be connected with a filename. Filenames are as in Unix (slash-separated). All filenames must start with a slash.

When a filename is created, the parent directory must already exist (in the link operation). For regular files and symlinks it is allowed that the inode is connected to several filenames.

With unlink the filename is deleted. Unlike in Unix the last unlink operation for an inode does not delete the inode automatically. The delete is delayed until the transaction is committed. (So a file can be renamed by first unlinking the old name, and then linking the new name.)

For directories, it is required that the directory is empty before unlink. It is not possible to delete "/".

There are three kinds of locks for filenames:

  • Existence locks: This means that the filename must not be deleted by a competing transaction. Existence locks are non-exclusive, i.e. several transaction can hold them for the same name.
  • Unlink locks: This is the counterpart - this lock means that the filename is going to be deleted. Unlink locks are exclusive.
  • Creation locks: This type of lock means that a filename is being created in an exclusive way. This lock is also exclusive.

The locks are not granted for the whole path under which a file is known, but only for the last component of the path relative to the containing directory. The directory can be moved.

For example, assume there is a directory /dir. Transaction 1 creates a file in this directory /dir/file. While the transaction is open, an existence lock on /dir and a creation lock on /dir/file are held. A competing transaction 2 tries to delete the directory /dir. Of course, both transactions cannot be committed together - they are logically inconsistent. What actually happens, depends on the order of the operations: If the file is created first, transaction 1 gets all its locks, and transaction 2 fails when trying to get an unlink lock for /dir. If the deletion occurs first, transaction 2 gets the unlink lock on /dir, and transaction 1 fails to acquire the existence lock on /dir.

lookup


	rhyper lookup(trans_id, hyper, longstring, bool) = 14;
lookup(tid, dir_inode, path, symbolic): This RPC is used to look up file names and path names. Possible data cases:

  • path is an absolute path, and dir_inode=(-1): This looks up the path and returns the inode.
  • path is a relative path, and dir_inode is a real inode of a directory: This walks down the path starting at dir_inode.

The lookup resolves symbolic links. If the symbolic flag is true, the last component of path is excluded from symbolic link resolution.

This RPC does not acquire locks.

rev_lookup


	rlongstrings rev_lookup(trans_id, hyper) = 15;
rev_lookup(tid, inode):

Reverse lookup for this inode: Returns the connected filenames.

This RPC does not acquire locks.

rev_lookup_dir


	rlongstring rev_lookup_dir(trans_id, hyper) = 16;
rev_lookup_dir(tid, inode):

Reverse lookup for this inode: If the inode is a directory returns the absolute name of the directory. Otherwise an error is returned (ENOIENT if the inode does not exist, or EFHIER if the inode is not a directory).

The returned name is existence-locked.

link_count


	rint link_count(trans_id, hyper) = 17;
link_count(tid, inode):

Returns the number of filenames linked with this inode. Note that this number is not what Unix puts into the nlink field of a stat, because PlasmaFS does not create links for "." and "..".

This RPC does not acquire locks.

link


        rvoid link(trans_id, longstring, hyper) = 18;
link(tid, path, inode): Creates this (absolute) filename, and links it with this inode.

This implicitly sets the ctime of the inode and the mtime of the directory inode to the current server time.

An existence lock on the directory containing the new file, and a creation lock for the file are obtained. Note that it is required that the directory is also linked in the file hierarchy (i.e. you cannot put new links into directories without name).


	rvoid link_at(trans_id, hyper, longstring, hyper) = 19;
link_at(tid, dir_inode, name, inode): Creates a new name in the directory referenced by dir_inode. The name is connected with inode.

unlink


        rvoid unlink(trans_id, longstring) = 20;
unlink(tid, path): Deletes this filename

This implicitly sets the ctime of the inode and the mtime of the directory inode to the current server time.

This locks the inode, and acquires an unlink lock for the path.

If the number of links for the inode drops to 0 at commit time, the inode is implicitly deleted.


	rvoid unlink_at(trans_id, hyper, longstring) = 21;
unlink_at(tid, dir_inode, name): Deletes the member name from the directory referenced by dir_inode.

list


	rentries list(trans_id, hyper) = 22;
list(tid, inode): Lists the contents of the directory. Only a single directory can be listed (no recursion). The RPC returns the basenames of the contained files only (path information stripped)

The path name of the directory is existende-locked.

rename


	rvoid rename(trans_id, longstring, longstring) = 23;
rename(tid, old_path, new_path): Renames old_path into new_path. It is required that new_path does not yet exist.


	rvoid rename_at(trans_id, hyper, longstring, hyper, longstring) = 24;
rename_at(tid, old_dir_inode, old_name, new_dir_inode, new_name): Renames the path identified by old_name in old_dir_inode into the path identified by new_name in new_dir_inode.

namelock

	
	rvoid namelock(trans_id, hyper, longstring) = 25;
namelock(tid, dir_inode, name): Acquires an existence lock on the member name of the directory referenced by dir_inode. This means that a competing transaction cannot delete this name, or rename it. The protection is valid until the end of the transaction.

Note that it is also not possible to delete the containing directory, i.e. dir_inode, because only empty directories can be deleted. However, this directory can be renamed and moved away. So this lock does not protect against changes of the path under which dir_inode is known.

Fails with ECONFLICT if the lock cannot be acquired.

It is required that the directory exists, and that there is a member name. Otherwise ENOENT is returned.

set_block_checksum

The checksums are not automatically set. The client has to call set_block_checksum for every written block.


	rvoid set_block_checksum(trans_id, hyper, hyper, longstring) = 26;
set_block_checksum(tid, inode, index, checksum)

iterate


	rhypers iterate(trans_id, hyper, int) = 27;
iterate by inode: iterate(inode, n) returns the up to n smallest inodes that are larger than inode. (Privileged operation.)

	/* not yet implemented */

Authentication and authorization

impersonate


	bool impersonate(longstring, longstring, longstrings, longstring_opt, bool) = 28;
impersonate(user,group,supp_groups,auth_ticket_opt,delete)

Become a different user. By default, the file operations are done as the user ID that was used to authenticate on the RPC level (or "pnobody" if anonymous access is permitted). This operation changes this for the lifetime of the TCP connection. This is only allowed if there is currently no transaction.

Unless the current user ID is "proot" or already user on the RPC level, one needs an authentication ticket to prove that the operation is permitted. The ticket is automatically deleted when delete is true (saves memory).

Returns true on success, and false on error.

get_auth_ticket


	longstring_opt get_auth_ticket(longstring) = 29;
get_auth_ticket(user)

Generates a new authentication ticket for user. The ticket can be passed to impersonate to restore the rights of user even if one is not logged in as this user on the RPC level. The ticket has a limited lifetime only.

Only user or "proot" is allowed to create such a ticket for user.

Returns NULL if the operation is not permitted.

renew_auth_ticket


	void renew_auth_ticket(longstring) = 30;
renew_auth_ticket(ticket)

Extends the lifetime of the passed ticket. Note that there is intentionally no return value.

read_admin_table


	rlongstring read_admin_table(longstring) = 31;
read_admin_table(key)

Returns the contents of the admin table key as a single string (which is actually a line-structured text file).

Currently defined tables: "passwd", and "group".

write_admin_table


	rvoid write_admin_table(longstring,longstring) = 32;
write_admin_table(key,contents)

Sets the contents of the admin table key as a single string (which is actually a line-structured text file).

Currently defined tables: "passwd", and "group". Only the user "proot" can modify these tables.

This operation is not transactional.

The inode cache


	/* The inodecache can quickly determine whether an [inodeinfo]
	   is still up to date, or whether the sequence number of the
	   [inodeinfo] is still up to date. This is faster than a regular
	   [get_inodeinfo] because this can happen
	   outside a transaction, and because often no database query is
	   required.
	*/

is_up_to_date


	bool is_up_to_date(hyper, inodeinfo) = 33;
is_up_to_date(inode,ii): Checks whether ii is the current version of the inode metadata for inode. Returns true if this was the case at the moment the RPC was sent by the caller.

Returns false if the inode is not known, if an error occurs, or if it cannot be quickly determined that the inode is actually up to date. So false does not necessarily imply that ii is out of date. In this case, the client should use alternate means of checking this.

is_up_to_date_seqno


	bool is_up_to_date_seqno(hyper, hyper) = 34;
is_up_to_date(inode,seqno): Same check but only for the sequence number of the inode




    } = 1;
} = 0x8000e001;

#endif


This web site is published by Informatikbüro Gerd Stolpmann
Powered by Caml