Plasma GitLab Archive
Projects Blog Knowledge

Module Netsys_posix


module Netsys_posix: sig .. end
POSIX-specific system calls missing in the Unix module


File descriptor polling


type poll_array 
The array of poll_cell entries
type poll_req_events 
type poll_act_events 
Poll events. poll_req_events is used to request that certain event types are observed. poll_act_event shows which event types are actually possible

type poll_cell = {
   mutable poll_fd : Unix.file_descr;
   mutable poll_req_events : poll_req_events;
   mutable poll_act_events : poll_act_events;
}
The poll cell refers to the descriptor poll_fd. The poll_req_events are the events the descriptor is polled for. The poll_act_events are the actually reported events.
val have_poll : unit -> bool
Whether there is a native poll implementation on this OS
val poll_req_events : bool -> bool -> bool -> poll_req_events
poll_req_events rd wr pri: Create a set of in events consisting of the bits rd, wr, and pri. rd means to poll for input data, wr to poll for output data, and pri to poll for urgent input data.
val poll_req_triple : poll_req_events -> bool * bool * bool
Looks into a poll_req_events value, and returns the triple (rd,wr,pri).
val poll_null_events : unit -> poll_act_events
Create an empty set of poll_act_events, for initilization of poll cells.
val poll_result : poll_act_events -> bool
Look whether there is any event in poll_out_events
val poll_rd_result : poll_act_events -> bool
val poll_wr_result : poll_act_events -> bool
val poll_pri_result : poll_act_events -> bool
val poll_err_result : poll_act_events -> bool
val poll_hup_result : poll_act_events -> bool
val poll_nval_result : poll_act_events -> bool
Look for the bit in poll_act_events and return the status
val create_poll_array : int -> poll_array
Create a poll array with the given size. The poll_fd member is initialized with Unix.stdin, and the two event members are empty.
val set_poll_cell : poll_array -> int -> poll_cell -> unit
set_poll_cell a k c: Sets the poll cell k to c. The index k must be in the range from 0 to N-1 when N is the length of the poll array.
val get_poll_cell : poll_array -> int -> poll_cell
get_poll_cell a k: Returns the poll cell k. The index k must be in the range from 0 to N-1 when N is the length of the poll array.
val blit_poll_array : poll_array ->
int -> poll_array -> int -> int -> unit
blit_poll_array a1 p1 a2 p2 len: Copies the len cells at index p1 from a1 to a2 at index p2.
val poll_array_length : poll_array -> int
Return the number of cells in the poll array
val poll : poll_array -> int -> float -> int
poll a n tmo: Poll for the events of the cells 0 to n-1 of poll array a, and set the poll_revents member of all cells. Wait for at most tmo seconds (a negative value means there is no timeout). Returns the number of ready file descriptors.

On platforms without native support for poll the function is emulated using Unix.select. Note, however, that there is a performance penalty for the emulation, and that the output flags poll_error_result, poll_hangup_result, and poll_invalid_result are not emulated.

val restarting_poll : poll_array -> int -> float -> int
A wrapper around poll that handles the EINTR condition
val poll_single : Unix.file_descr -> bool -> bool -> bool -> float -> bool
poll_single fd rd wr pri tmo: Polls a single descriptor for the events given by rd, wr, and pri. In tmo the timeout can be passed. Returns true if one of the requested events is indicated for the descriptor. The EINTR case is not handled.

Actually, poll_req_events and poll_act_events are integers that are bitmasks of some constants. The following functions allow access to this detail.
val int_of_req_events : poll_req_events -> int
val int_of_act_events : poll_act_events -> int
val req_events_of_int : int -> poll_req_events
val act_events_of_int : int -> poll_act_events
val const_rd_event : int
val const_wr_event : int
val const_pri_event : int
val const_err_event : int
val const_hup_event : int
val const_nval_event : int

Fork helpers



Ocamlnet invokes Unix.fork at some places to create child processes for doing real work. The following functions allow it to register a handler that is run in the forked child process. Note that this is done by the O'caml code calling fork, and not via the POSIX atfork() facility.

The handler should release OS resources like file descriptors that are by default shared with the parent process.

The handler are not invoked when the only purpose of the fork is to exec a different process.

class type post_fork_handler = object .. end
A post_fork_handler is a named function unit -> unit
val register_post_fork_handler : post_fork_handler -> unit
Registers a new post fork handler (MT-Safe)
val remove_post_fork_handler : post_fork_handler -> unit
Removes a post fork handler from the registry (MT-Safe)
val run_post_fork_handlers : unit -> unit
Runs all post fork handlers. Exceptions are caught and printed to stderr.

Misc


val int_of_file_descr : Unix.file_descr -> int
Return the file descriptor as integer. See also Netsys.int64_of_file_descr which works for all OS.
val file_descr_of_int : int -> Unix.file_descr
Make a file descriptor from an integer
val sysconf_open_max : unit -> int
Return the maximum number of open file descriptor per process. It is also ensured that for every file descriptor fd: fd < sysconf_open_max()
val getpgid : int -> int
Return the process group ID of the process with the passed PID. For the number 0, the process group ID of the current process is returned.
val getpgrp : unit -> int
Same as getpgid 0, i.e. returns the process group ID of the current process.
val setpgid : int -> int -> unit
setpgid pid pgid: Set the process group ID of the process pid to pgid. If pid = 0, the process group ID of the current process is changed. If pgid = 0, as process group ID the process ID of the process referenced by pid is used.

It is only possible for a process to join a process group if both belong to the same session.

val setpgrp : unit -> unit
Same as setpgid 0 0: A new process group ID is created, and the current process becomes its sole member.
val tcgetpgrp : Unix.file_descr -> int
Return the process group ID of the foreground process group of the session associated with the file descriptor, which must be a tty.
val tcsetpgrp : Unix.file_descr -> int -> unit
Sets the foreground process group ID of the session associated with the file descriptor, which must be a tty.
val ctermid : unit -> string
Returns the name of the controlling tty of the current process as pathname to a device file
val ttyname : Unix.file_descr -> string
Returns the name of the controlling tty referred to by the file descriptor.
val getsid : int -> int
Returns the session ID of the process with the passed PID. For the PID 0, the session ID of the current process is returned.
val setreuid : int -> int -> unit
Changes both the real and the effective user ID of the current process.
val setregid : int -> int -> unit
Changes both the real and the effective group ID of the current process.

Fork+exec



The following function has some similarity with posix_spawn, but is changed to our needs, Only special (although frequent) cases can be implemented with posix_spawn.

type wd_spec =
| Wd_keep
| Wd_chdir of string
| Wd_fchdir of Unix.file_descr

type pg_spec =
| Pg_keep
| Pg_new_bg_group
| Pg_new_fg_group
| Pg_join_group of int

type fd_action =
| Fda_close of Unix.file_descr (*Close the descriptor*)
| Fda_close_ignore of Unix.file_descr (*Close the descriptor but ignore EBADF errors*)
| Fda_close_except of bool array (*Closes all descriptors except those for which except.(k) is true where k = int_of_file_descr fd. Descriptors outside the array index range are closed.*)
| Fda_dup2 of Unix.file_descr * Unix.file_descr (*Duplicate the first descriptor to the second as dup2 does*)

type sig_action =
| Sig_default of int
| Sig_ignore of int
val spawn : ?chdir:wd_spec ->
?pg:pg_spec ->
?fd_actions:fd_action list ->
?sig_actions:sig_action list ->
?env:string array -> string -> string array -> int
spawn cmd args: Fork the process and exec cmd which gets the arguments args. On success, the PID of the new process is returned.

  • chdir: If set, the new process starts with this working directory (this is done before anything else)
  • pg: If set, the new process will be a member of this process group
  • fd_actions: If set, these descriptor actions are executed sequentially
  • sig_actions: If set, these signal actions are executed sequentially
  • env: If set, the process gets this environment instead of the current one
Any exceptions in the subprocess are detected, and reported. However, if Fda_close leads to EBADF for a descriptor, this error is ignored.

If pg=Pg_new_fg_group, one should include Sig_ignore Sys.sigttou in sig_actions.


Subprocesses and signals



Watching subprocesses requires that the right signal handler is installed: install_subprocess_handler
type watched_subprocess 
val watch_subprocess : int -> int -> bool -> Unix.file_descr * watched_subprocess
let fd, ws = watch_subprocess pid pgid kill_flag: Enters the subprocess pid into the watch list. If pgid > 0, the process group ID is pgid (for killpg_subprocess and killpg_all_subprocesses). The kill_flag controls the process selection of kill_all_subprocesses and killpg_all_subprocesses.

The returned descriptor fd is open for reading and will indicate EOF when the subprocess is terminated. Via ws it is possible to query information about the subprocess. The installed signal handler will wait for the subprocess and put the process status into ws.

The caller has to close fd after the termination is signaled.

val ignore_subprocess : watched_subprocess -> unit
Changes the arrangement so that the termination of the subprocess is no longer reported by the file descriptor. The file descriptor indicates EOF immediately (and can be closed by the caller). Nevertheless, the signal handler still waits for the subprocess to avoid zombies.

Any further access to ws will fail.

val forget_subprocess : watched_subprocess -> unit
Frees OS resources. Any further access to the ws will fail.
val get_subprocess_status : watched_subprocess -> Unix.process_status option
If the subprocess is terminated, this function returns the status. Otherwise None is returned
val kill_subprocess : int -> watched_subprocess -> unit
Sends this signal to the subprocess if this process still exists. Never throws an exception.
val killpg_subprocess : int -> watched_subprocess -> unit
Sends this signal to the process group of the subprocess if there is still a watched subprocess belonging to this group. Never throws an exception.
val kill_all_subprocesses : int -> bool -> bool -> unit
kill_all_subprocess signal override nogroup: Sends a signal to potentially all subprocesses. The signal is sent to a watched process if the process still exists, and these two conditions hold both:
  • not nogroup || pgid = 0: Processes with pgid > 0 are excluded if nogroup is set
  • kill_flag || override: A process needs to have kill_flag set, or override is specified
Never throws an exception if the signal handler is installed.
val killpg_all_subprocesses : int -> bool -> unit
killpg_all_subprocess signal override: Sends a signal to potentially all subprocesses belonging to a process group (i.e. pgid>0). . The signal is sent to a process group if there are still watched subprocesses belonging to the group, and if either the kill_flag of any of the subprocesses process was set to true, or override is true.

Never throws an exception if the signal handler is installed.

val install_subprocess_handler : unit -> unit
Installs a SIGCHLD handler for watching subprocesses. Note that only processes are waited for that are registered with watch_subprocess.

The handler works both in the single-threaded and the multi-threaded case. install_subprocess_handler can safely called several times. The handler is installed every time the function is called, but the required data structures are only initialized at the first call.

val register_subprocess_handler : unit -> unit
Uses the Netsys_signal framework to manage the installation of the SIGCHLD handler.

This is the preferred method of installing the SIGCHLD handler.


Further notes.

The subprocess handler and fork(): The subprocess handler uses pipes for notification, and because of this it is sensitive to unpredicted duplicates of the pipe descriptors. fork() duplicates these pipe descriptors. If nothing is done about this issue, it can happen that the notification does not work anymore as it relies on detecting closed pipes.

If fork() is immediately followed by exec() (as it is done to run subcommands), the problem does not occur, because the relevant descriptors are closed at exec() time.

If fork() is used to start worker processes, however, we have to be careful. The descriptors need to be closed, so that the parent can continue to monitor subprocesses, and to allow the worker processes to use this mechanism. This module defines post fork handlers (see above), and a handler is automatically added that cleans the descriptors up. All user code has to do is to call run_post_fork_handlers immediately after fork() has spawned the new child, from the new child. This completely resets everything.

The subprocess handler and multi-threading: The handler has been carefully designed, and works even in multi-threaded programs. However, one should know that multi-threading and fork() do not interact well with each other. Again, the problems do not occur if fork() is followed by exec(). There is no solution for the case that worker processes are started with fork(), though. The (very generic) problem is that the state of mutexes and other multi-threading primitives is not well-defined after a fork().

Syslog


type level = Netlog.level 

The log levels
type syslog_facility = [ `Authpriv
| `Cron
| `Daemon
| `Default
| `Ftp
| `Kern
| `Local0
| `Local1
| `Local2
| `Local3
| `Local4
| `Local5
| `Local6
| `Local7
| `Lpr
| `Mail
| `News
| `Syslog
| `User
| `Uucp ]
The facilities. Only `User and `Local0 to `Local7 are standard POSIX. If a facility is unavailable it is silently substituted by `Local0. The value `Default leaves this unspecified.
type syslog_option = [ `Cons | `Ndelay | `Nowait | `Odelay | `Pid ] 
The syslog options:
  • `Cons: Fall back to console logging if syslog is unavailable
  • `Ndelay: Open the connection immediately
  • `Odelay: Open the connection at the first call syslog (default)
  • `Nowait: Do not wait until it is ensured that the message is sent
  • `Pid: Log the PID with every message

val openlog : string option ->
syslog_option list -> syslog_facility -> unit
openlog ident options facility: Opens a log stream. ident is prepended to every message if given (usually the program name). The facility is the default facility for syslog calls.
val syslog : syslog_facility -> level -> string -> unit
syslog facility level message: Logs message at level for facility
val closelog : unit -> unit
Closes the log stream

Usually, the log stream is redirected to syslog by either:
  • setting Netlog.current_logger to syslog facility, e.g.
     Netlog.current_logger := Netsys_posix.syslog `User 
  • using the Netplex class for sending message to syslog (XXX)


Sync


val fsync : Unix.file_descr -> unit
Sync data and metadata to disk
val fdatasync : Unix.file_descr -> unit
Syncs only data to disk. If this is not implemented, same effect as fsync

Optional POSIX functions


val have_fadvise : unit -> bool
Returns whether the OS supports the fadvise POSIX option

type advice =
| FADV_NORMAL
| FADV_SEQUENTIAL
| FADV_RANDOM
| FADV_NOREUSE
| FADV_WILLNEED
| FADV_DONTNEED
val fadvise : Unix.file_descr -> int64 -> int64 -> advice -> unit
Advises to load pages into the page table from the file, or to remove such pages.
val have_fallocate : unit -> bool
Returns whether the OS supports the fallocate POSIX option
val fallocate : Unix.file_descr -> int64 -> int64 -> unit
Allocate space for the file and the specified file region

POSIX Shared Memory


val have_posix_shm : unit -> bool
Returns whether the OS supports POSIX shared memory

type shm_open_flag =
| SHM_O_RDONLY
| SHM_O_RDWR
| SHM_O_CREAT
| SHM_O_EXCL
| SHM_O_TRUNC
val shm_open : string -> shm_open_flag list -> int -> Unix.file_descr
Opens a shared memory object. The first arg is the name of the object. The name must begin with a slash, but there must be no further slash in it (e.g. "/sample"). The second arg are the open flags. The third arg are the permission bits.

The open flags are interpreted as follows:

  • SHM_O_RDONLY: Open the object for read access
  • SHM_O_RDWR: Open the object for read-write access
  • SHM_O_CREAT: Create the object if it does not exist
  • SHM_O_EXCL: If SHM_O_CREAT was also specified, and a an object with the given name already exists, return an error (Unix.EEXIST).
  • SHM_O_TRUNC: If the object already exists, truncate it to zero bytes
One of SHM_O_RDONLY or SHM_O_RDWR must be given.

On success, the function returns a file descriptor representing the object. To access the object, one has to memory-map this file use one of the map_file functions in the Bigarray module, or in Netsys_mem). Use Unix.ftruncate to resize the object.

Note that it is unspecified whether this file pops up somewhere in the file system, and if so, where.

If a system error occurs, the function raises a Unix.Unix_error exception.

val shm_unlink : string -> unit
Unlinks the name for a shared memory object

POSIX semaphores


val have_posix_semaphores : unit -> bool
Returns true if POSIX semaphores are supported on this system

Constants.
val sem_value_max : int
The maximum value of a semaphore, but at most max_int
val sem_size : int
The size of an anonymous semaphore in bytes (sizeof(sem_t))

Types.
type sem_kind = [ `Anonymous | `Named ] 
type 'a semaphore 
type named_semaphore = [ `Named ] semaphore 
type anon_sempahore = [ `Anonymous ] semaphore 

type sem_open_flag =
| SEM_O_CREAT
| SEM_O_EXCL

Named semaphores.
val sem_open : string ->
sem_open_flag list -> int -> int -> named_semaphore
sem_open name flags mode init_value: Opens a named semaphore which is optionally created. Sempahore names usually begin with a slash followed by a single name component (not containing a further slash).

Interpretation of flags:

  • SEM_O_CREAT: The semaphore is created if not yet existing. The mode and init_value are interpreted if the creation actually occurs. mode is the permission of the semaphore. init_value is the (non-negative) initial value, up to sem_value_max.
  • SEM_O_EXCL: The semaphore is only opened if the semaphore does not exist yet. Othwerwise an EEXIST error is returned

val sem_close : named_semaphore -> unit
Closes a named semaphore. Semaphores are also automatically closed when the GC finds that the semaphore is unreachable.
val sem_unlink : string -> unit
Unlinks the semaphore name

Anonymous semaphores.
val sem_init : Netsys_types.memory -> int -> bool -> int -> anon_sempahore
sem_init mem pos pshared init_value: Initializes the memory at position pos to pos + sem_size() - 1 as anonymous semaphore. If pshared the semaphore is shared between processes. init_value is the initial non-negative value (max is sem_value_max.
val sem_destroy : anon_sempahore -> unit
Destroys the anonymous semaphore
val as_sem : Netsys_types.memory -> int -> anon_sempahore
as_sem mem pos: Interprets the memory at position pos to pos + sem_size() - 1 as anonymous semaphore. The memory region must already have been initialized.

Operations.
val sem_getvalue : 'a semaphore -> int
Returns the value of the semaphore. If the value is bigger than what can be represented as int, an EINVAL error is returned.

The returned value is non-negative - if the underlying POSIX function reports a negative value zero is returned instead.

val sem_post : 'a semaphore -> unit
Unlocks the semaphore (increases the value by 1)

type sem_wait_behavior =
| SEM_WAIT_BLOCK
| SEM_WAIT_NONBLOCK
val sem_wait : 'a semaphore -> sem_wait_behavior -> unit
Locks the semaphore (decreases the value by 1). If the semaphore value is already zero, and SEM_WAIT_BLOCK is given, the function waits until another process or thread posts. If SEM_WAIT_NONBLOCK the error EAGAIN is returned.

sem_wait may be interrupted by signals.


Linux I/O Priorities



These system calls are only available on Linux since kernel 2.6.13, and not even on every architecture. i386, x86_64, ia64, and PPC are known to work.

Per-process I/O priorities are currently only supported by the CFQ I/O scheduler.

val have_ioprio : unit -> bool
Returns true if the system call ioprio_get is supported

type ioprio_target =
| Ioprio_process of int (*A single process*)
| Ioprio_pgrp of int (*A process group*)
| Ioprio_user of int (*All processes owned by this user*)

type ioprio =
| Noprio (*I/O prioritization is unsupported by block layer*)
| Real_time of int (*0..7 (higest..lowest prio)*)
| Best_effort of int (*0..7 (higest..lowest prio)*)
| Idle
val ioprio_get : ioprio_target -> ioprio
Retrieve the priority of the target. If several processes match the target, the highest priority is returned. If no process matches, the unix error ESRCH will be raised.
val ioprio_set : ioprio_target -> ioprio -> unit
Sets the priority of the target processes.

Debugging


module Debug: sig .. end
This web site is published by Informatikbüro Gerd Stolpmann
Powered by Caml