Module Netsys_mem

module Netsys_mem: sig .. end

type memory = Netsys_types.memory 

We consider 1-dimensional bigarrays of chars as memory buffers. They have the useful property that the garbage collector cannot relocate them, i.e. the address is fixed. Also, one can mmap a file, and connect the bigarray with shared memory.

val blit_memory_to_string : memory -> int -> string -> int -> int -> unit

blit_memory_to_string src srcoff dst dstoff len copies len characters from buffer src, starting at character number srcoff, to string dst, starting at character number dstoff

Raise Invalid_argument if srcoff and len do not designate a valid subbuffer of src, or if dstoff and len do not designate a valid substring of dst.

val blit_memory_to_string_unsafe : memory -> int -> string -> int -> int -> unit

Unsafe version

val blit_string_to_memory : string -> int -> memory -> int -> int -> unit

blit_string_to_memory src srcoff dst dstoff len copies len characters from string src, starting at character number srcoff, to buffer dst, starting at character number dstoff

Raise Invalid_argument if srcoff and len do not designate a valid substring of src, or if dstoff and len do not designate a valid subbuffer of dst.

val blit_string_to_memory_unsafe : string -> int -> memory -> int -> int -> unit

Unsafe version

val memory_address : memory -> nativeint

Returns the start address of the buffer

val getpagesize : unit -> int

Returns the size of a page as reported by sysconf.

On many systems, a page has 4096 bytes, but this cannot be relied upon.

This function is only available if the system has sysconf.

val pagesize : int

The best guess at the page size

val alloc_memory_pages : ?addr:nativeint -> int -> memory

Allocates memory in units of pages. The memory buffer will start on a page boundary.

The passed int is the requested number of bytes. The size of the buffer is rounded up so a whole number of pages is allocated.

Optionally, one can request a certain address addr (which must be a multiple of the page size). There is, however, no guarantee that this wish can be fulfilled. In any way, one should check with memory_address what the start address really is.

This function is only available if the system has sysconf, mmap, and allows to allocate anonymous memory with mmap (outside POSIX but common).

val alloc_aligned_memory : int -> int -> memory

alloc_aligned_memory alignment size: Allocates a buffer of size whose start address is a multiple of alignment. The alignment must be a power of two, and at least Sys.word_size/8.

Aligned memory can be useful for ensuring that the whole memory block is in the same cache line. A cache line typically has 64 or 128 bytes - but this is very platform-specific. (Linux: look at /proc/cpuinfo.)

This function is only available if the system has posix_memalign.

val memory_map_file : Unix.file_descr ->
       ?pos:int64 -> ?addr:nativeint -> bool -> int -> memory

memory_map_file fd shared size: Maps size bytes of the file fd into memory, and returns the memory buffer like Bigarray.Array1.map_file. pos and shared have the same meaning as there. In addr one can suggest a start address. There is, however, no guarantee that this wish can be fulfilled.

val memory_unmap_file : memory -> unit

Unmaps the file. The memory block must have been allocated with memory_map_file or with Bigarray.Array1.map_file.

Note that the data pointer of the bigarray is set to NULL, and that any further access of the array will trigger a segmentation violation! The intention of this function is to control when the file mapping is removed. Normally, this is done first when the GC finalizer is run.

It is required that there are no subarrays at the time of calling this function. (If so, the function does nothing.)

val zero_pages : memory -> int -> int -> unit

zero_pages m pos len: If possible, the memory pages in the range pos to pos+len-1 of m are allocated again, so that they replace the previous pages.

It is required that the start address of the range is a multiple of the page size, and the len is a multiple of the page size. Fails with Invalid_argument if the requirements are not met, or the function is otherwise unavailable.

Calling zero_pages is sometimes an optimization when old memory pages can be dropped, and when the alternative of overwriting these pages would imply a copy-on-write operation.

val grab : nativeint -> int -> memory

grab addr len: Interprets the address range from addr to addr+len-1 as memory bigarray.

This function does not allocate! It assumes that the given address range points to valid memory.

val as_value : memory -> int -> 'a

as_value mem offset: Returns a pointer to mem+offset. There must be a valid boxed value at this address (i.e. at the word preceding mem+offset there must be a valid block header, followed by a valid value of the right type). However, this is not checked:

This is an unsafe function that may crash the program if used in the wrong way!

It is possible that the memory block is deallocated while the returned value still exists. Any attempt to access the value will result into undefined behavior (anything from funny results to crashes may happen).

Some Ocaml primitives might not work on the returned values (polymorphic equality, marshalling, hashing) unless Netsys_mem.value_area is called for the memory block.

val as_obj : memory -> int -> Obj.t

Same as as_value but returns the value as Obj.t

val value_area : memory -> unit

Marks the memory block as value area. This enables that the value primitives (polymorphic equality, marshalling, hashing) return meaningful results. The memory area is automatically unmarked when the finaliser for the memory block is run.

Be careful when marking sub arrays.

This function is first available since O'Caml 3.11.

val obj_address : Obj.t -> nativeint

val hdr_address : Obj.t -> nativeint

These two functions return the address of the Obj.t and the address of the header of the Obj.t, respectively.

Note that this can only be relied upon if the input object cannot be moved around by the garbage collector!

val cmp_string : string -> string -> int

Compares two strings like String.compare. This also works when the strings reside outside the O'Caml heap, e.g. in a memory block.

exception Out_of_space

val init_header : memory -> int -> int -> int -> unit

init_header mem offset tag size: Initializes the word at mem+offset as an Ocaml value header with the given tag and the given size (in words). The GC color is always set to "white".

val init_string : memory -> int -> int -> int * int

let voffset, bytelen = init_string mem offset len: Initializes the memory at offset and following bytes as Ocaml string with length len. Returns in voffset the offset where the value starts (i.e. offset plus one word), and in bytelen the number of bytes used in mem.

offset must be a multiple of the word size in bytes.

The string can be accessed with

 let s = (as_value mem voffset : string) 

The function is useful for initializing shared memory as string so that several processes can directly access the string.

The string has the GC color White.

Raises Out_of_space if the memory block is too small.

val init_string_bytelen : int -> int

Returns bytelen if init_string was called with the passed len.

val init_array : memory -> int -> int -> int * int

let voffset, bytelen = init_array mem offset size: Initializes the memory at offset and following bytes as Ocaml array with size elements. Returns in voffset the offset where the value starts (i.e. offset plus one word), and in bytelen the number of bytes used in mem.

The array cannot be used as float array.

offset must be a multiple of the word size in bytes.

The array can be accessed with

 let a = (as_value mem voffset : _ array) 

The elements of the array have a value but it might not be valid for the element type of the array. Because of this, it is unwise to access the elements before setting them for the first time.

The array has the GC color White.

Raises Out_of_space if the memory block is too small.

val init_float_array : memory -> int -> int -> int * int

Same for arrays of floats

val init_array_bytelen : int -> int

Returns bytelen if init_array was called with the passed size.

val init_float_array_bytelen : int -> int

Same for arrays of floats

type custom_ops = nativeint 

val init_value : ?targetaddr:nativeint ->
       ?target_custom_ops:(string * custom_ops) list ->
       memory ->
       int -> 'a -> init_value_flag list -> int * int

let voffset, bytelen = init_value mem offset v flags: Initializes the memory at offset and following bytes as copy of the boxed value v. Returns in voffset the offset where the value starts (i.e. offset plus one word), and in bytelen the number of bytes used in mem.

The copied value can then be accessed with

 let v' = (as_value mem voffset : 'a) 

offset must be a multiple of the word size in bytes.

The input value v must be heap-allocated. Also, a number of restrictions and caveats apply:

• Objects, closures, and lazy values are not supported
• Bigarrays are only supported if the Copy_bigarray flag is given. In this case, a copy of the bigarray is also made and appended to the value copy (i.e. it is also placed into the buffer mem).
• Abstract and custom values need to be enabled. For int32, int64, and nativeint the flag Copy_custom_int enables copying, and for bigarrays the flag Copy_bigarray. Generally, there is a function pointer in such data blocks which might be invalid when the memory buffer is loaded into a different executable. This specific problem can be fixed by passing target_custom_ops with the right pointers.
• Atoms (i.e. zero-sized blocks such as empty arrays) are only supported if the Copy_atom flag is present. It is, however, illegal to copy atoms because they lose then their atomic property. This breaks comparisons, e.g. if array=[| |] then.... Unfortunately there is nothing we can do about it.
• The input value may reside outside the Ocaml heap. This may break badly written C wrappers that do not use abstract or custom tags to mark foreign data.

The function raises Out_of_space if the memory block is too small. Cyclic input values are supported.

If the Copy_simulate flag is given, mem is not modified. In simulation mode, it is pretended that mem is as large as necessary to hold the value, no matter how large mem really is. The returned values voffset and bytelen reflect how much of mem would have been used.

If the targetaddr argument is passed, it is assumed that the memory block is mapped at this address and not at the address it is really mapped. This is useful for preparing memory that is going to be mapped at a different address than it is right now.

The new value has the GC color White.

val get_custom_ops : 'a -> string * custom_ops

Returns custom ops for a sample value (or Invalid_argument)

val copy_value : init_value_flag list -> 'a -> 'a

copy_value flags v: Creates a deep copy of v and returns it. The copy is allocated in the normal Ocaml heap.

Restrictions:

• Objects, closures, and lazy values are not supported (FIXME)
• Bigarrays are only supported if the Copy_bigarray flag is given. In this case, a copy of bigarrays are also made, and placed into additional buffers obtained via stat_alloc.
• Abstract and custom values need to be enabled. For int32, int64, and nativeint the flag Copy_custom_int enables copying, and for bigarrays the flag Copy_bigarray.
• Atoms are automatically fixed. Copy_atoms is ignored.

Cyclic input values are supported. Copy_simulate is ignored.

val color : Obj.t -> color

Return the GC color

val set_color : Obj.t -> color -> unit

Set the GC color

val mem_read : Unix.file_descr -> memory -> int -> int -> int

A version of Unix.read that uses a memory buffer. Some OS allow faster I/O when memory is page-aligned (see alloc_memory_pages). Also, a copy in the stub function can be avoided. Both effects can result in a considerable speedup.

val mem_write : Unix.file_descr -> memory -> int -> int -> int

A version of Unix.single_write that uses a memory buffer.

val mem_recv : Unix.file_descr ->
       memory -> int -> int -> Unix.msg_flag list -> int

val mem_send : Unix.file_descr ->
       memory -> int -> int -> Unix.msg_flag list -> int

Versions of Unix.recv, and Unix.send using memory buffers.

type memory_pool 

A pool of memory blocks that are all the same size and page-aligned (if the OS supports this). The pool tries to bundle memory allocations so that not for every block a system call is required. This reduces the number of system calls, and the number of entries in the process page table. Also, unused blocks are automatically returned to the pool.

val create_pool : int -> memory_pool

Create a new pool. The argument is the size of the memory blocks (must be a multiple of the page size)

val pool_alloc_memory : memory_pool -> memory

let (m,free) = pool_alloc_memory p: Gets a memory block m from the pool p. If required, new blocks are automatically allocated and added to the pool. This function is thread-safe.

The memory block is automatically garbage-collected.

val pool_block_size : memory_pool -> int

Returns the size of the memory blocks in bytes

val default_pool : memory_pool

The default pool with the default block size. This pool is used by Ocamlnet itself as much as possible

val pool_report : memory_pool -> string

Returns a report describing the memory allocation in the pool