Here we give some recipes how to submit HTTP and FTP requests to servers. There is a quite simple interface representing the hierarchy of remote files, which is recommended for all occasional uses. If performance is important, however, the protocol-specific interfaces will give you more options.
Let's start with an example: We want to get the public files
http://foo.org/bar
ftp://foo.org/baz
let fs1 = Nethttp_fs.http_fs "http://foo.org"
The same for FTP looks like:
let fs2 = Netftp_fs.ftp_fs "ftp://foo.org"
The objects fs1
and fs2
provide now a number of methods for accessing
files. These do not only cover downloads, but also listing directories,
writing files, renaming files, and a number of further operations. The
commonly available methods are those of Netfs.stream_fs
. The incarnations
of this interface for concrete protocols usually define more methods. It
is guaranteed that you can coerce the types to Netfs.stream_fs
, though:
let my_filesystems =
[ (fs1 :> Netfs.stream_fs); (fs2 :> Netfs.stream_fs) ]
The method we use here is read
:
method read : read_flags -> string -> Netchannels.in_obj_channel
All access methods take a list of flags as first argument. For example,
a possible flag here is `Binary
switching to binary mode for the protcols
where it makes a difference (like FTP).
The second argument is the file path, using slashes as separators, and
always starting with a slash. The path is appended to the base URL
given when creating the fs1
and fs2
objects. Note that the path must
not contain any URL-specific encodings like "%xx".
We get a an Netchannels.in_obj_channel
back we can read the data from:
let c1 = fs1 # read [] "/bar"
let s1 = Netchannels.string_of_in_obj_channel c1
let () = c1 # close_in()
let c2 = fs2 # read [`Binary] "/baz"
let s2 = Netchannels.string_of_in_obj_channel c2
let () = c2 # close_in()
It depends very much on the implementation what actually happens:
By default, the downloaded data are cached in a temporary file. Some
implementations support the streaming mode to avoid that (like HTTP),
and you are directly connected with the reading socket when reading from
the returned in_obj_channel
. Pass `Streaming
as flag to read
to
enable this. In streaming mode, however, neither retries nor redirects
are possible.
An overview:
write
works very much like read
, only that you get a
Netchannels.out_obj_channel
back. The network write operation
normally starts first when this channel is closed, and the so-far
cached data are uploaded to the server. For HTTP there is also
a streaming mode. The write
operation takes also flags that look
like normal open flags, i.e. whether you want to create a file,
truncate a file, or ensure the unique creation. Not all protocols
support every combination, though. For HTTP a write
is translated
to sending a PUT
method to the server.readdir
reads the names of a directory. For FTP this is clearly
an NLST command. For HTTP the implementation just extracts the
names from the hyperlinks contained in the page - this works well
for applying readdir
to automatically generated file indexes.remove
translates to the DELETE
method for HTTP. This method
is defined in the HTTP standard, but usually not available on
servers, though.size
gets the size of a file. This may work for HTTP or may not -
depending on whether the server knows the size (which is often not
the case for dynamically generated content). For FTP there is the
SIZE command. However, this is a later addition to the protocol,
and may not be available on ancient servers.test
and test_list
allow it to test properties of files
(existence, type, non-empty, accessibility). This is only partially
implemented for HTTP and FTP.
rename
mkdir
rmdir
symlink
readlink
copy
There is a full implementation of Netfs.stream_fs
for accessing
local files: Netfs.local_fs
. There are more definitions inside
and outside Ocamlnet, see Other impementations of stream_fs for a list. It also mentions
a WebDAV implementation extending the HTTP definition explained here,
and which covers a larger set of access operations.
When creating the access object, one can set a callback that allows almost arbitrary configurations:
let fs1 =
Nethttp_fs.http_fs
~config_pipeline:(fun p -> ...)
"http://foo.org"
let fs2 =
Netftp_fs.ftp_fs
~config_client:(fun c -> ...)
"ftp://foo.org"
Here, p
and c
are the underlying protocol implementations.
Do it like this in the config_pipeline
callback:
let user = "user" in
let password = "secret" in
let realm = "the realm string" in
let domain = [ "http://foo.org " ] in
let keys = new Nethttp_client.key_ring() in
keys # add_key (Nethttp_client.key ~user ~password ~realm ~domain);
let ah = new Nethttp_client.unified_auth_handler keys in
p # add_auth_handler ah
The Nethttp_client.unified_auth_handler
implements at the moment
the "basic" and "digest" schemes (and will probably be extended in the
future). On unencrypted transports the "basic" scheme is disabled by
default. With
new Nethttp_client.unified_auth_handler ~insecure:bool keys
the "basic" scheme is always enabled. (Note that the "basic" scheme sends the password in clear text. See below how to activate TLS.)
This is not done in the config_client
callback, but directly when
creating the filesystem object. The user string is always taken from
the URL (as normally the accessed file space depends on the user).
Passwords and account names (if needed) are supplied by callbacks:
let fs2 =
Netftp_fs.ftp_fs
~get_password:(fun () -> "secret")
~get_account:(fun () -> "account")
"ftp://user@foo.org"
Do it like this in the config_pipeline
callback:
p # set_proxy "proxy.company.net" 8080;
p # set_proxy_auth "user" "secret";
p # avoid_proxy_for [ ".company.net"; "localhost" ]
Or you can just import this data from the environment variables "http_proxy" and "no_proxy":
p # set_proxy_from_environment()
Web proxies often also support FTP URLs, but only for a limited set
of operations (often only read
works).
Note that you have to use Nethttp_fs
to use this feature, not Netftp_fs
:
let fs1 =
Nethttp_fs.http_fs
~config_pipeline:(fun p ->
p # set_proxy "proxy.company.net" 8080;
p # set_proxy_auth "user" "secret";
)
~enable_ftp:true
"ftp://foo.org"
In this configuration, the web proxy is contacted via HTTP, and the proxy talks FTP with the content server.
If you do not configure the proxy, any accesses will fail (no transport error).
This is an alternative to a web proxy.
Do it like this in the config_pipeline
callback:
p # set_socks5_proxy "proxy.company.net" 1080
Do it like this in the config_client
callback:
c # set_socks5_proxy "proxy.company.net" 1080
The current implementation is limited to file transfers in passive mode, though. This is nowadays not a problem anymore, because almost all FTP servers support it.
In order to use HTTPS the TLS provider must be initialized. This is normally GnuTLS:
nettls-gnutls
to the list of findlib packagesNettls_gnutls.init
NB. In previous versions of OCamlnet there was a separate "Https_client"
module. This module does not exist anymore, as its functionality is
integrated into the main Nethttp_client
module.
NB. The server is authenticated by default, using the system-wide list of CA certificates.
You can also enable TLS for FTP connections if the server supports it (of course, you also need to activate GnuTLS as described in the section above):
let fs2 =
Netftp_fs.ftp_fs
...
~tls_enabled:true
~tls_required:true (* or false *)
"ftp://user@foo.org"
NB. The server is authenticated by default, using the system-wide list of CA certificates.
The Netglob
module can be used to interpret wildcards in filenames.
An example:
let files =
Netglob.glob
~fsys:(Netglob.of_stream_fs (fs2 :> Netfs.stream_fs))
(`String "/dir/*.gif")
This would return paths to all gif files in /dir on the FTP server fs2
.
Caveat: Globbing works only well if the server provides the operations for recognizing directories. Most FTP servers don't - only the recently (1) added MLST command allows it to safely recognize directories.
(1) recently = many years ago, but existing FTP deployments seem only to be very slowly upgraded.
Test whether an FTP server supports MLST: There must be a line for MLST in the output for the FEAT command, like in
$ ftp localhost
Connected to localhost.
220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
...
ftp> quote feat
211-Extensions supported:
EPRT
IDLE
MDTM
SIZE
REST STREAM
MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
MLSD
AUTH TLS
PBSZ
PROT
UTF8
TVFS
ESTA
PASV
EPSV
SPSV
ESTP
211 End.
For HTTP servers, the recognition of directories is even worse. Don't rely on it.
There are the generic copy algorithms Netfs.copy
and Netfs.copy_into
,
which can also be used for HTTP and FTP.
For example, let's copy the file "/xyz" from fs1
to fs2
, i.e. from
an HTTP server to an FTP server:
Netfs.copy (fs1 :> Netfs.stream_fs) "/xyz" (fs2 : Netfs.stream_fs) "/xyz"
There is the generic file iterator Netfs.iter
, which walks through
the directory hierarchy on the server:
Netfs.iter
~pre:(fun name kind symkind -> ...)
(fs2 :> Netfs.stream_fs)
"/"
Note that you may run into problems in conjunction with HTTP and FTP:
Nethttp_client
The Nethttp_client
module is the real implementation of HTTP. It
is asynchronous, which means it can do many tasks in parallel, but
also needs special care when using it.
The tasks are organized as pipelines. This is actually an HTTP protocol feature - one can send the next request(s) to an HTTP server without having to wait for the response of the prior request. The pipeline is available as Ocaml class:
let p = new Nethttp_client.pipeline
By adding requests, the pipeline is told to send them to the right
server. If the server allows pipelining on HTTP level, this feature
is exploited to speed up the accesses. Here, we submit two different
GET
requests:
let x1 = new Nethttp_client.get "http://foo.org/bar"
let x2 = new Nethttp_client.get "http://foo.org/baz"
p # add x1;
p # add x2
The objects x1
and x2
are instances of Nethttp_client.http_call
.
They have lots of access methods for changing the request type and
getting the returned response.
Now, after just adding the objects, nothing is done yet. You also have to start the pipeline:
p # run()
(Or, alternatively, do Unixqueue.run p#event_system
, which is just
the same.)
Now, you can get the fetched data with:
let d1 = x1 # response_body # value
Before looking at the value, you would normally check the status code of the response. There are a few possibilities:
Nethttp_client.http_call.status
only indicates the class of the
response (success, redirect, client error, server error), or whether
there was a socket or protocol error.Nethttp_client.http_call.response_status
returns the code as
variantNethttp_client.http_call.response_status_code
returns the code numerically
The object p
is actually several pipelines in one object. For each
connected server, p
keeps a small number of parallel connections
(normally 2). Each connection is then driven in a pipelined way, if
possible.
When running p
, all the connections to the servers are created in
parallel, and the communication is done in parallel.
Netftp_client
The Netftp_client
is also an asynchronous implementation. It is a bit
more difficult to exploit this, though, because Netftp_client
is a bit
simpler than Nethttp_client
.
Generally, a client can only connect to a single server, not to several at once. Also, there is no queue of pending requests - all submitted requests are immediately executed, and the next request can first be started when the previous has finished.
In synchrounous code, a file download looks like:
let client = new ftp_client()
let () = client # exec (connect_method ~host:"foo.bar" ())
let () = client # exec
(login_method
~user:"anonymous"
~get_password:(fun () -> "")
~get_account:(fun () -> "")
())
let buffer = Buffer.create 1000
let ch = new Netchannels.output_buffer buffer
let () = client # exec
(get_method
~file:(`NVFS "dir/baz")
~representation:`Image
~store:(fun _ -> `File_structure ch)
());
let s = Buffer.contents buffer
As you see, this is just a sequence of exec
calls. There is also an
exec_e
method allowing to start these operations as
Uq_engines.engine
, allowing asynchronous execution.
FTP has a number of subtle protocol options - like file transfer in
several modes. Please refer to Netftp_client
where these details are
extensively documented.
You close the connection using the QUIT
command with
let () = client # exec (quit_method())
or just run client # reset()
to just shut the TCP connection down.
The following things are possible, but would require some more in-depth discussion exceeding the scope of this list of recipes:
tls
configuration option
you can change many aspects of the TLS layer. In particular, you can weaken
the authentication by accepting any server certification, and you can
make it stronger by requiring a certain certification, or by sending a
client certificate. You need to change the option
Nethttp_client.http_options.tls
for doing so. See Tls
for more links.
Netftp_fs
allows it to pass the
tls_config
argument. By setting this explicitly, you can also get
any advanced effect.gssapi_provider
argument of
Netftp_fs.ftp_fs
to Netgss.System
, and the ticket-based Kerberos login
works.