Plasma GitLab Archive
Projects Blog Knowledge

Class type Nethttp_client.http_call

class type http_call = object .. end
The container for HTTP calls

http_call is the runtime container for HTTP method calls. It contains the request message, the response message, and the current transmission status.

In previous versions of netclient, this class type was called message. This was quite inexact because this class embraces both messages that are part of a call.

Incompatible changes:

  • using_proxy has been removed. This simply isn't a property of an individual call.
  • get_req_uri has been removed from the public interface for similar reasons.
  • The request and response messages are now primarily stored as Netmime.mime_header and Netmime.mime_body objects. The old style access methods remain in the API for now. The advantage is that it is possible to use external files as body containers.
  • There are two request headers, `Base and `Effective.
method is_served : bool
true if request/response cycle(s) have been finished, i.e. the call was successful, or a final error state has been reached.
method status : status
The condensed status
method auth_status : unit auth_status
Authenticaton status. This status code is important for mutual authentication (i.e. when the client also authenticates the server), which can be enabled for some generic authentication handlers. In this case status and all the other methods just report about the last message from the server. They will not indicate whether the authentication failed on the side of the client (in particular, no exception is thrown). It is required to check that auth_status=`OK.

An example of a mechanism with mutual authentication is Netmech_digest_http.Digest_mutual.

method tls_session_props : Nettls_support.tls_session_props option
If TLS is enabled, this returns the session properties
method gssapi_props : Netsys_gssapi.client_props option
If GSSAPI is active, return the properties
method request_method : string
The HTTP method as string
method request_uri : string
The request URI as string. This is always an absolute URI in the form "http://server/path" or "https://server/path".
method set_request_uri : string -> unit
Sets the request URI. This implicitly also sets the transport layer ID (see below).

Changed in Ocamlnet-3.3: The URI is no longer immediately parsed, but first when the call is submitted to a pipeline. This means that parsing errors will first be reported by the add method. The background is that parsing now depends on pipeline options.

method request_header : header_kind -> Netmime.mime_header
The whole header of the request. Users of this class should only modify the `Base header. After the call has been processed, the `Effective header contains the version of the header that has actually been transmitted.

The user should set the following headers:

  • Content-length: Set this to the length of the request body if known. (The client falls back to HTTP 1.0 if not set!)
  • Content-type: Set this to the media type of the request body
  • Expect: Set this to "100-continue" to enable a handshake before the body is sent. Recommended for large bodies. (See also set_expect_handshake below.)
The following headers may be set, but there are reasonable defaults:
  • Date
  • User-agent
The following headers must not be set:
  • Connection

method set_request_header : Netmime.mime_header -> unit
Replaces the whole `Base header object
method set_expect_handshake : unit -> unit
Configures that a handshake is done before sending the request body. This is useful when the request body can be large, and authentication or response indirections are possible. New since Ocamlnet-3.3.
method set_chunked_request : unit -> unit
Configures that the request is transmitted using chunked encoding. This has advantages when the size of the request is not known in advance. However, this works only for true HTTP/1.1 servers. New since Ocamlnet-3.3.
method effective_request_uri : string
The URI actually sent to the server in the request line of the protocol.
method request_body : Netmime.mime_body
The whole body of the request. This method fails after set_request_device has been called (no body then).
method set_request_body : Netmime.mime_body -> unit
Replaces the whole body object
method set_request_device : (unit -> Uq_io.in_device) -> unit
Sets that the request data is read from the passed device instead of taking it from a body object. The device must be connected with the same event loop as the HTTP client.
method set_accept_encoding : unit -> unit
Sets the Accept-Encoding field in the request header, and includes all decompression algorithms registered in Netcompression. Additionally, the automatic decompression of the response body is enabled.

Note that you need to ensure that the algorithms are really registered at Netcompression. For example, to get gzip support, run

 Netgzip.init() 
, and include netzip as library.
method response_status_code : int
The three-digit status code
method response_status_text : string
The text transmitted along with the code
method response_status : Nethttp.http_status
The decoded code. Unknown codes are mapped to the generic status values `Ok, `Multiple_choices, `Bad_request, and `Internal_server_error.
method response_protocol : string
The HTTP version indicated in the response
method response_header : Netmime.mime_header
The whole header of the response. If the call has not succeeded, Http_protocol will be raised.
method response_body : Netmime.mime_body
The whole body of the response. If the call has not succeeded, Http_protocol will be raised. If the call has succeeded, but no body has been transmitted, the empty body is substituted.

If the response is directly forwarded to a device (after calling set_response_body_storage (`Device d)), there is no accessible response body, and this method will fail.

method response_body_storage : response_body_storage
How to create the response body. Defaults to `Memory.
method set_response_body_storage : response_body_storage -> unit
Sets how to create the response body
method max_response_body_length : int64
Returns the current maximum length (initially Int64.max_int)
method set_max_response_body_length : int64 -> unit
Sets a new maximum length. When the body exceeds this maximum by more than the size of the internal buffer, the reception of the response is interrupted, and the error is set to Response_too_large.
method get_reconnect_mode : http_call how_to_reconnect
Get what to do if the server needs to be reconnected, i.e. if the request must be sent repeatedly. By default, this is Send_again_if_idem.
method set_reconnect_mode : http_call how_to_reconnect -> unit
Sets the reconnect mode
method get_redirect_mode : http_call how_to_redirect
By default, the redirect mode is Redirect_if_idem.
method set_redirect_mode : http_call how_to_redirect -> unit
Sets the redirect mode
method proxy_enabled : bool
Returns the proxy mode
method set_proxy_enabled : bool -> unit
Sets the proxy mode
method no_proxy : unit -> unit
Same as set_proxy_enabled false
method is_proxy_allowed : unit -> bool
Deprecated. Same as proxy_enabled
method proxy_use_connect : bool
Whether to use the CONNECT method if the connection is made via a web proxy. This is normally true if the transport layer is Nethttp_client.https_trans_id
method empty_path_replacement : string
The string to substitute in the request line for the empty path. This is usually "/", and for OPTIONS it is "*".
method is_idempotent : bool
Whether the method is to be considered as idempotent ( = repeated invocations have the same result and no side effect). This is true for GET and HEAD.
method has_req_body : bool
Whether the method allows to send a request body
method has_resp_body : bool
Whether the method allows to reply with a body. This is true except for HEAD.
method set_transport_layer : transport_layer_id -> unit
Sets the transport layer. Note that set_request_uri also sets this ID, but always to the default for the type of URL.
method same_call : unit -> http_call
This method returns a new object that will perform the same call as this object (this function is called "reload" in browsers). The new object is initialized as follows:
  • The state is set to `Unserved
  • The request method remains the same (the class of the returned object remains the same)
  • The request URI is the same string as the original URI
  • The transport layer ID is the same
  • The base request header is the same object
  • The request body is the same object
  • Options like reconnect, redirect mode, and proxy mode are copied.

method get_req_method : unit -> string
Get the name of the request method. Same as request_method.
method get_host : unit -> string
The host name of the content server, extracted from the URI.

Changed in Ocamlnet-3.3: The host can first be extracted after the call is submitted to a pipeline.

method get_port : unit -> int
The port number of the content server, extracted from the URI.

Changed in Ocamlnet-3.3: The port can first be extracted after the call is submitted to a pipeline.

method get_path : unit -> string
The path (incl. query, if any) extracted from the URI.

Changed in Ocamlnet-3.3: The path can first be extracted after the call is submitted to a pipeline.

method get_uri : unit -> string
the full URI of this message: http://server:port/path. If the path is empty, it is omitted. - Same as request_uri.
method get_req_body : unit -> string
What has been sent as body in the (last) request. Same as request_body # value.
method get_req_header : unit -> (string * string) list
Deprecated. What has been sent as header in the (last) request. Returns (key, value) pairs, where the keys are all in lowercase.

In new code, the request_header object should be accessed instead.

method assoc_req_header : string -> string
Query a specific header entry, or raise Not_found
method assoc_multi_req_header : string -> string list
Return all header values for a given field name (header entries which allow several values separated by commas can also be transmitted by several header lines with the same name).
method set_req_header : string -> string -> unit
method get_resp_header : unit -> (string * string) list
Deprecated. Get the header of the last response. The keys are in lowercase characters again.
method assoc_resp_header : string -> string
Query a specific header entry of the response.
method assoc_multi_resp_header : string -> string list
Return all response header values for a given field name (header entries which allow several values separated by commas can also be transmitted by several header lines with the same name).
method get_resp_body : unit -> string
Deprecated. Returns the body of the last response if the response status is OK (i.e. the code is in the range 200 to 299).

Otherwise, Http_error (code, body) is raised where 'code' is the response code and 'body' is the body of the (errorneous) response.

method dest_status : unit -> string * int * string
Returns the status line of the last response (but status lines with code 100 are ignored). The returned triple is (http_string, code, text)
method private_api : private_api
This web site is published by Informatikbüro Gerd Stolpmann
Powered by Caml