Plasma GitLab Archive
Projects Blog Knowledge

Index of values


(++) [Uq_engines.Operators]
Another name for seq_engine.
(<&) [Shell]
Same as assign, but infix notation.
(>&) [Shell]
Same as assign, but infix notation.
(>>) [Uq_engines.Operators]
Another name for fmap_engine.
_exit [Netsys]
Exit the program immediately without running the atexit handlers.
_of_PMAP'V2'pmapproc_callit'arg [Rpc_portmapper_aux]
_of_PMAP'V2'pmapproc_callit'res [Rpc_portmapper_aux]
_of_PMAP'V2'pmapproc_dump'arg [Rpc_portmapper_aux]
_of_PMAP'V2'pmapproc_dump'res [Rpc_portmapper_aux]
_of_PMAP'V2'pmapproc_getport'arg [Rpc_portmapper_aux]
_of_PMAP'V2'pmapproc_getport'res [Rpc_portmapper_aux]
_of_PMAP'V2'pmapproc_null'arg [Rpc_portmapper_aux]
_of_PMAP'V2'pmapproc_null'res [Rpc_portmapper_aux]
_of_PMAP'V2'pmapproc_set'arg [Rpc_portmapper_aux]
_of_PMAP'V2'pmapproc_set'res [Rpc_portmapper_aux]
_of_PMAP'V2'pmapproc_unset'arg [Rpc_portmapper_aux]
_of_PMAP'V2'pmapproc_unset'res [Rpc_portmapper_aux]
_of_call_args [Rpc_portmapper_aux]
_of_call_result [Rpc_portmapper_aux]
_of_mapping [Rpc_portmapper_aux]
_of_pmaplist [Rpc_portmapper_aux]
_of_pmaplist_p [Rpc_portmapper_aux]
_program [Rpc_portmapper_clnt.PMAP.V2]
_program [Rpc_portmapper_clnt.Make'PMAP.V2]
_to_PMAP'V2'pmapproc_callit'arg [Rpc_portmapper_aux]
_to_PMAP'V2'pmapproc_callit'res [Rpc_portmapper_aux]
_to_PMAP'V2'pmapproc_dump'arg [Rpc_portmapper_aux]
_to_PMAP'V2'pmapproc_dump'res [Rpc_portmapper_aux]
_to_PMAP'V2'pmapproc_getport'arg [Rpc_portmapper_aux]
_to_PMAP'V2'pmapproc_getport'res [Rpc_portmapper_aux]
_to_PMAP'V2'pmapproc_null'arg [Rpc_portmapper_aux]
_to_PMAP'V2'pmapproc_null'res [Rpc_portmapper_aux]
_to_PMAP'V2'pmapproc_set'arg [Rpc_portmapper_aux]
_to_PMAP'V2'pmapproc_set'res [Rpc_portmapper_aux]
_to_PMAP'V2'pmapproc_unset'arg [Rpc_portmapper_aux]
_to_PMAP'V2'pmapproc_unset'res [Rpc_portmapper_aux]
_to_call_args [Rpc_portmapper_aux]
_to_call_result [Rpc_portmapper_aux]
_to_mapping [Rpc_portmapper_aux]
_to_pmaplist [Rpc_portmapper_aux]
_to_pmaplist_p [Rpc_portmapper_aux]

A
abandon_call [Rpc_client]
To be used in conjunction with Rpc_client.Keep_call: The call with this session identifier is no longer expected, and removed from the internal data structures.
abandon_job [Shell_sys]
Deprecated name for cancel_job
ac_by_host [Nethttpd_services]
Configures host-based access control
accelerated_pollset [Netsys_pollset_posix]
Returns a pollset using a "fast" poll mechanism, if available.
access [Netplex_mutex]
Access the named mutex.
access [Netmcore_buffer]
access b pos f: Gets access to the internal string backing the byte at position pos.
act_events_of_event_source [Netsys_posix]
Return the actual events of the source.
act_events_of_int [Netsys_posix]
add [Netshm_hashtbl]
add tbl key value: Adds the binding of key to value to the table.
add [Netshm]
add tbl key value: Adds the binding of key to value to the table.
add [Netmcore_hashtbl]
add tbl x y adds a binding of x to y in table tbl.
add [Netmcore_heap]
Pushes a new value onto the heap
add [Netcgi_apache.Apache.Table]
Table.add tbl key value adds the (key, value) pair in the table tbl.
add [Uq_libevent.LIBOEVENT]
add_1_complement [Netauth]
The addition algorithm for 1's-complement numbers.
add_abort_action [Unixqueue]
An abort action is added to the group.
add_buffer [Netbuffer]
add_buffer nb1 nb2: Adds the contents of nb2 to the end of nb1
add_call [Rpc_client]
add_call client proc_name arg f: add the call to the procedure name with argument arg to the queue of unprocessed calls.
add_char [Netbuffer]
add_char nb c: Adds a single char at the end of the buffer
add_char_2 [Netbuffer]
add_char_2 nb c1 c2: Adds two chars at the end of the buffer
add_char_4 [Netbuffer]
add_char_4 nb c1 c2 c3 c4: Adds four chars at the end of the buffer
add_close_action [Unixqueue]
A close action is added for the file descriptor.
add_command [Shell_sys]
Adds a command to a job.
add_consumer [Shell_sys]
Adds a consumer to the job.
add_event [Unixqueue]
Add an additional event.
add_event [Equeue]
Puts an event into the event queue of the system.
add_event_source [Netsys_posix]
Adds the event source to the aggregator
add_handler [Unixqueue]
Add an event handler that is associated to the given group.
add_handler [Equeue]
Adds a handler to the list of handlers of the system.
add_helper_service [Netplex_kit]
add_helper_service ctrl name hooks: Adds a helper service name to the controller ctrl.
add_init_array [Netmcore_heap]
add_init_array m n f: Pushes a new value with n element onto the heap.
add_inplace [Netpagebuffer]
add_inplace b f: Calls f m pos len where m is the last page of the buffer, and pos is the first free byte on the page, and len is the number of free bytes on the page.
add_inplace [Netbuffer]
add_inplace nb f: Calls the function f to add bytes to the netbuffer nb.
add_pipeline [Shell_sys]
Adds a pipeline which redirects the output of the command src to the input of the command dest.
add_plugins [Netmcore]
To enable compute processes for any Netplex program, call this function with the controller object as argument.
add_producer [Shell_sys]
Adds a producer to the job.
add_resource [Unixqueue]
Add a resource such that it is watched for conditions described by the operation for the period given by the float number.
add_some [Netmcore_heap]
add_some mut x: Returns Some x where the O'Caml value representing Some is allocated in the heap using mut.
add_string [Netpagebuffer]
Adds a string to the end of the buffer
add_string [Netbuffer]
add_string nb s: Adds a copy of the string s to the logical end of the netbuffer nb.
add_string [Netmcore_buffer]
Adds a string to the end of the buffer
add_sub_memory [Netpagebuffer]
Adds a sub memory buffer to the end of the buffer
add_sub_memory [Netbuffer]
Same as add_sub_string, but gets data from a memory buffer
add_sub_memory [Netmcore_buffer]
Adds a sub memory buffer to the end of the buffer
add_sub_string [Netpagebuffer]
Adds a sub string to the end of the buffer
add_sub_string [Netbuffer]
add_sub_string nb s k n: Adds the substring of s starting at position k with length n to the logical end of the netbuffer nb.
add_sub_string [Netmcore_buffer]
Adds a sub string to the end of the buffer
add_substring [Netbuffer]
Alias for add_sub_string
add_uniform_array [Netmcore_heap]
add_uniform_array m n x: Pushes a new value with n elements onto the heap.
add_weak_resource [Unixqueue]
Similar to add_resource, but the resource is weak.
admin [Netcgi_apache.Apache.Server]
server_admin field.
admin_connector [Netplex_cenv]
Determines the admin socket of the controller, and returns an RPC client connector suitable for connecting with the admin interface of the controller.
advance [Netpagebuffer]
advance b n: Marks further n bytes in the last page of the buffer as used.
advance [Netbuffer]
These two functions work together, so that the effect of add_inplace can be obtained in two steps.
ajp_processor [Netcgi_plex]
all_decoders [Netcompression]
The iana names of all encoders and decoders, resp.
all_encoders [Netcompression]
alloc_aligned_memory [Netsys_mem]
alloc_aligned_memory alignment size: Allocates a buffer of size whose start address is a multiple of alignment.
alloc_mem [Netmcore_mempool]
Allocate memory in this pool.
alloc_memory_pages [Netsys_mem]
Allocates memory in units of pages.
alloc_wait_entry [Netmcore_condition]
Allocates a wait_entry
alloc_wait_entry_e [Netmcore_condition]
alloc_wait_entry_e mut set filename: Allocates a new wait entry with notification via named pipe.
any_file_client_connector [Netplex_sockserv]
Interprets a file name as connector for a local RPC service.
apply_relative_url [Neturl]
apply_relative_url base rel: Interprets rel relative to base and returns the new URL.
are_compatible [Xdr]
are_compatible: currently not implemented
area_for_additions [Netbuffer]
arg_parse [Netcgi_ajp]
arg_parse speclist anon_fun usage_msg parses the command line and return an associative list describing the content of the property file (see Netcgi_ajp.props_of_file).
args [Netplex_main]
let (opt_list, cmdline_cfg) = args(): Returns opt_list for inclusion in the Arg.parse option list.
args [Netcgi_apache.Apache.Request]
request_rec args field.
as_obj [Netsys_mem]
Same as as_value but returns the value as Obj.t
as_process_event [Netsys_win32]
Casts the process handle to an event handle.
as_sem [Netsys_posix]
as_sem mem pos: Interprets the memory at position pos to pos + sem_size() - 1 as anonymous semaphore.
as_value [Netsys_mem]
as_value mem offset: Returns a pointer to mem+offset.
assbackwards [Netcgi_apache.Apache.Request]
request_rec assbackwards field; true if HTTP/0.9, "simple" request.
assign [Shell]
Arranges a redirection such that writing to src or reading from src will actually write to target or read from target (i.e., the target descriptor is duplicated and replaces the src descriptor just before the process is launched.)
assign [Netmcore_ref]
assign sr x: Sets the contents of sr to a deep copy of x.
assigned_pair [Shell]
Returns the target and the source of the assignment as pair of descriptors (target,src).
at_fdcwd [Netsys_posix]
Pseudo descriptor value to be used as first argument of *at functions
auth_none [Rpc_server]
The authentication method "AUTH_NONE", i.e.
auth_none [Rpc_client]
The authentication method that does not perform authentication.
auth_too_weak [Rpc_server]
The method that always rejects.
auth_transport [Rpc_server]
Authenticate by trusting the transport layer.
auth_type [Netcgi_apache.Apache.Request]
available_input_encodings [Netconversion]
Returns the list of all available encodings that can be used for input strings.
available_output_encodings [Netconversion]
Returns the list of all available encodings that can be used for output strings.

B
best_charset [Nethttp.Header]
Returns the best charset for a header and a list of supported charsets.
best_encoding [Nethttp.Header]
Returns the best encoding for a header and a list of supported encodings.
best_locking_method [Netshm]
Return the best locking method other than No_locking
best_media_type [Nethttp.Header]
Returns the best media type for a header and a list of supported types.
bg_blue [Netsys_win32]
bg_green [Netsys_win32]
bg_intensity [Netsys_win32]
Bits of text_attr
bg_red [Netsys_win32]
bigarray [Netshm]
bind [Rpc_server]
Binds the program as specified by the binding list.
bind [Rpc_client]
Binds this program additionally
blit [Netbuffer]
Compatibility name for blit_to_string, now deprecated
blit_from_string [Netbuffer]
blit_from_string src srcpos dest destpos len: Copies the len bytes at position srcpos from the string src to the netbuffer dest at position destpos.
blit_memory_to_string [Netsys_mem]
blit_memory_to_string src srcoff dst dstoff len copies len characters from buffer src, starting at character number srcoff, to string dst, starting at character number dstoff
blit_memory_to_string_unsafe [Netsys_mem]
Unsafe version
blit_mstrings_to_memory [Xdr_mstring]
blits the mstrings one after the other to the memory, so that they appear there concatenated
blit_poll_array [Netsys_posix]
blit_poll_array a1 p1 a2 p2 len: Copies the len cells at index p1 from a1 to a2 at index p2.
blit_string_to_memory [Netsys_mem]
blit_string_to_memory src srcoff dst dstoff len copies len characters from string src, starting at character number srcoff, to buffer dst, starting at character number dstoff
blit_string_to_memory_unsafe [Netsys_mem]
Unsafe version
blit_to_memory [Netpagebuffer]
Blits contents to another memory buffer
blit_to_memory [Netbuffer]
blit_to_memory nb srcpos dest destpos len: Copies the len bytes at position srcpos from nb to the membuffer dest at position destpos.
blit_to_memory [Netmcore_buffer]
Blits contents to a memory buffer
blit_to_string [Netpagebuffer]
Blits contents to a string
blit_to_string [Netbuffer]
blit_to_string nb srcpos dest destpos len: Copies the len bytes at position srcpos from nb to the string dest at position destpos.
blit_to_string [Netmcore_buffer]
Blits contents to a string
blocking_gread [Netsys]
let p = blocking_gread fd_style fd s pos len: Like gread up to len bytes are read from fd and stored in s.
blocking_read [Netsys]
Same as blocking_gread `Read_write
blocking_socket_config [Rpc_client]
Configuration with non_blocking_connect = false
bool_var [Netplex_cenv]
Access a variable with simple type.
bound_programs [Rpc_server]
Returns the bound programs
bounded_full_split [Netstring_pcre]
Like split_delim, but returns the delimiters in the result
bounded_full_split [Netstring_str]
Splits into at most n substrings, based on full_split
bounded_split [Netstring_pcre]
Splits the string according to the regexp in substrings.
bounded_split [Netstring_str]
Splits into at most n substrings, based on split
bounded_split_delim [Netstring_pcre]
Same as split, but occurrences of the delimiter at the beginning and the end are returned as empty strings
bounded_split_delim [Netstring_str]
Splits into at most n substrings, based on split_delim
broadcast [Netmcore_condition]
broadcast c restarts all processes waiting on the condition variable c.
buffer_of_descr [Netmcore_buffer]
Look up the buffer for this descriptor
buffered_transactional_optype [Netcgi1_compat.Netcgi]
buffered_transactional_optype [Netcgi]
Deprecated name for buffered_transactional_outtype
buffered_transactional_outtype [Netcgi]
The output_type implementing transactions with a RAM-based buffer
byte_order_mark [Netconversion]
Returns the byte order mark that must occur at the beginning of files to indicate whether "little endian" or "big endian" is used.

C
c [Netmech_scram.AES_CTS]
cache [Uq_engines]
Same as function
call [Shell]
Starts the pipeline represented by the list of commands; i.e.
call [Shell_sys]
Executes the command and waits until the process terminates (synchronous execution a la system, but no intermediate shell).
call [Rpc_simple_client]
call simple_client procedure_name procedure_arg: Call the procedure with the given name and the given argument.
call_job [Shell_sys]
Starts the job (see run_job) and waits until it finishes (see finish_job); i.e.
callit [Rpc_portmapper]
callit pm_client program_spec proc_name argument: This is an alternate way of calling a remote procedure.
camlbox_bcapacity [Netcamlbox]
same for an already opened box
camlbox_bmessages [Netcamlbox]
same for an already opened box
camlbox_bmsg_size [Netcamlbox]
same for an already opened box
camlbox_cancel_wait [Netcamlbox]
Cancels a camlbox_wait operation called by a different thread
camlbox_capacity [Netcamlbox]
Returns the maximum number of messages n
camlbox_delete [Netcamlbox]
camlbox_delete box k: Deletes the message number k from box.
camlbox_fd [Netcamlbox]
Opens a new file descriptor to this address
camlbox_get [Netcamlbox]
camlbox_get box k: Returns message number k from box.
camlbox_get_copy [Netcamlbox]
camlbox_get box k: Returns a deep copy of message number k from box.
camlbox_messages [Netcamlbox]
Returns the number of messages at the moment
camlbox_msg_size [Netcamlbox]
Returns the max size of a message in bytes
camlbox_scapacity [Netcamlbox]
same for a box already opened for sending
camlbox_send [Netcamlbox]
Sends a message to a camlbox.
camlbox_sender [Netcamlbox]
Prepares for sending.
camlbox_sender_of_fd [Netcamlbox]
Gets a sender for a file descriptor from camlbox_fd.
camlbox_smessages [Netcamlbox]
same for a box already opened for sending
camlbox_smsg_size [Netcamlbox]
same for a box already opened for sending
camlbox_wait [Netcamlbox]
Waits until new messages arrive, and return the message numbers.
camlbox_wake [Netcamlbox]
Sends an "empty message" - this only means that if the receiving thread is waiting for new messages it is interrupted and camlbox_wait will return the empty list.
cancel_all_timers [Netplex_cenv]
Cancels all active timers
cancel_input_thread [Netsys_win32]
Stops the input thread.
cancel_job [Shell_sys]
Tries to get rid of a running job.
cancel_output_thread [Netsys_win32]
Stops the output thread.
cancel_timer [Netplex_cenv]
Cancels the timer: The callback function is not called any longer
cgi_with_args [Netcgi_common]
cgi_with_args (new cgi) env out op ?put_arg in_chan constructs a Netcgi.cgi object.
channel_logger [Netlog]
channel_logger ch lev: Prints all messages with a level of lev and higher to the channel ch.
channel_logger [Netplex_log]
Outputs messages to the channel
channel_logger_from_obj [Netplex_log]
Outputs messages to the channel
char_of_option [Telnet_client]
Converts the option name to the character representing it on the octet-stream level.
check_directory_glob_expr [Netglob]
If the last component of the glob expression matches only directories because it ends with a literal / character, the value Some expr' is returned where expr' matches the same path without the trailing /.
check_rooted_glob_expr [Netglob]
If the glob expression matches the root directory (i.e.
chmod_shm [Netshm]
chown_shm [Netshm]
Set file permission bits, user and group ownership of the object
clear [Netpagebuffer]
Deletes all contents of the buffer
clear [Netbuffer]
Deletes all contents from the buffer.
clear [Netmcore_hashtbl]
Empty a hash table.
clear [Netmcore_buffer]
Deletes all contents of the buffer
clear [Netmcore_queue]
Removes all elements from the queue
clear [Netcgi_apache.Apache.Table]
Table.clear tbl removes all key/value pairs from the table tbl.
clear [Unixqueue]
Terminate the whole group.
clear_close_on_exec [Netsys]
Working versions of the functions with the same name in Unix
clear_console [Netsys_win32]
Clears the screen and the buffer, and sets the cursor to (0,0).
clear_until_end_of_line [Netsys_win32]
Writes a space character from the current cursor position to the end of the line
clear_until_end_of_screen [Netsys_win32]
Writes a space character from the current cursor position to the end of the screen
client_auth_method [Rpc_auth_gssapi]
Creates an authentication method from a GSS-API interface.
client_auth_method [Rpc_auth_sys]
Pass the result of this function to Rpc_client.set_auth_methods to configure client authentication.
client_auth_method [Rpc_auth_dh]
Creates a new authentication method using AUTH_DH.
client_channel_binding [Netmech_scram]
Returns the channel binding ("" of none)
client_configure_channel_binding [Netmech_scram]
Instruct the client to require a channel binding.
client_connector [Netplex_sockserv]
Returns the RPC client connector for this Netplex address
client_emit_flag [Netmech_scram]
Whether client_emit_message can now be called
client_emit_message [Netmech_scram]
Emits the next message to be sent to the server
client_endpoint [Uq_engines]
Returns the client endpoint contained in the connect_status
client_error_flag [Netmech_scram]
Whether an error occurred, and the protocol cannot advance anymore
client_export [Netmech_scram]
client_finish_flag [Netmech_scram]
Whether the client is authenticated and the server verified
client_import [Netmech_scram]
Exports a client session as string, and imports the string again.
client_protocol_key [Netmech_scram]
The 128-bit protocol key for encrypting messages.
client_recv_flag [Netmech_scram]
Whether client_recv_message can now be called
client_recv_message [Netmech_scram]
Receives the next message from the server
client_socket [Uq_engines]
For backward compatibility.
client_user_name [Netmech_scram]
The user name
clock_getcpuclockid [Netsys_posix]
Return the ID of a clock that counts the CPU seconds of the given process.
clock_getres [Netsys_posix]
Get the resolution of this clock
clock_gettime [Netsys_posix]
Get the time of this clock
clock_settime [Netsys_posix]
Set the time of this clock
clone [Netcgi.Argument]
close [Netulex.ULB]
Sets ulb_eof of the unicode_lexbuf.
close [Netcgi_dbi.DBI_DRIVER]
close_connection_cache [Http_client]
Closes all descriptors known to the cache
close_output_thread [Netsys_win32]
Adds the EOF condition to the buffer.
close_process [Netsys_win32]
Closes the handle in the w32_process value, if it is still open
close_server_socket [Netplex_sockserv]
Closes a socket as opened with create_server_socket
close_shm [Netshm]
Closes the object.
closed [Netcgi_dbi.DBI_DRIVER]
closelog [Netsys_posix]
Closes the log stream
cmd [Shell]
The same as command but with a slightly different interface: Use
 cmd "ls" [ "/dir/file" ] 
instead of
 command ~arguments:[|"/dir/file"|] "ls" 
cmd_interpreter [Shell_fs]
Creates a command interpreter from a function that creates the real command (as pipeline) to execute
cmp_string [Netsys_mem]
Compares two strings like String.compare.
color [Netsys_mem]
Return the GC color
command [Shell]
Creates a command descriptor, to be used in call.
command [Shell_sys]
Creates a command from the passed arguments:
command_of_process [Shell_sys]
Returns the command that is now running as the process
comment [Nethttp.Cookie]
Returns the comment associated to the cookie or "" if it does not exists.
comment [Netcgi.Cookie]
Returns the comment associated to the cookie or "" if it does not exists.
comment [Netcgi_common.Cookie]
Returns the comment associated to the cookie or "" if it does not exists.
comment_url [Nethttp.Cookie]
Returns the comment URL associated to the cookie or "" if it does not exists.
comment_url [Netcgi.Cookie]
Returns the comment URL associated to the cookie or "" if it does not exists.
comment_url [Netcgi_common.Cookie]
Returns the comment URL associated to the cookie or "" if it does not exists.
commit [Netcgi_dbi.DBI_DRIVER]
common_url_syntax [Neturl]
Syntax descriptions for common URL schemes.
compare [Rpc_proxy.ManagedClient]
ManagedClient can be used with Set.Make and Map.Make
compose [Netsendmail]
Composes a mail message with a main text, and optionally a number of attachments.
concat_mstrings [Xdr_mstring]
concatenates the mstrings and return them as single string.
config_filename [Netplex_main]
Returns the filename of the configuration file, or the default if it has not been set on the command-line
config_filename_opt [Netplex_main]
Returns the filename of the configuration file, or None if it has not been set on the command-line
config_tree_opt [Netplex_main]
Returns the tree of the configuration file, or None if it has not been set by create or modify.
configure [Rpc_client]
configure client retransmissions timeout: sets the number of retransmissions and the timeout for the next calls.
configure_job_handlers [Shell_sys]
Configures signal and at_exit handlers for jobs: The keyboard signals SIGINT and SIGQUIT are forwarded to all jobs which are running in the background (and thus are not automatically notified) and want to get such signals (forward_signals)., The signals SIGTERM and SIGHUP are (if the handler is installed) forwarded to all dependent processes (regardless whether they are running in their own Unix process group or not, and regardless of forward_signals)., The at_exit handler sends a SIGTERM to all dependent processes, too. In previous versions of Ocamlnet it was also possible to configure catch_sigchld to set whether a SIGCHLD handler is installed.
configure_next_call [Rpc_client]
Same as configure, but it only affects the next call
configure_pipeline [Http_client.Convenience]
This function will be called before the pipeline is used.
connect [Netcgi_dbi.DBI_DRIVER]
connect_check [Netsys]
Tests whether the socket is connected with the peer after calling Unix.connect.
connect_method [Ftp_client]
This method connects to the host
connection [Netcgi_apache.Apache.Request]
request_rec connection field.
connector [Uq_engines]
This engine connects to a socket as specified by the connect_address, optionally using the proxy, and changes to the state `Done(status) when the connection is established.
connector_of_sockaddr [Rpc_server]
Converts the socket address into a connector
connector_of_sockaddr [Rpc_client]
Converts the socket address into a connector
connector_of_socksymbol [Rpc_server]
Converts the Netsockaddr.socksymbol into a connector
connector_of_socksymbol [Rpc_client]
Converts the Netsockaddr.socksymbol into a connector
const_err_event [Netsys_posix]
const_hup_event [Netsys_posix]
const_nval_event [Netsys_posix]
const_pri_event [Netsys_posix]
const_rd_event [Netsys_posix]
const_wr_event [Netsys_posix]
constant_workload_manager_factory [Netplex_workload]
Reads a workload_manager section like
consume_event [Netsys_posix]
Consumes the event, and switches the event fd to off again.
content_type [Netcgi_apache.Apache.Request]
request_rec content_type field.
contents [Netpagebuffer]
Returns the contents as string
contents [Netbuffer]
Returns the contents of the buffer as fresh string.
contents [Netmcore_buffer]
Returns the full contents
convert [Netconversion]
Converts the string from in_enc to out_enc, and returns it.
convert_path [Netfs]
convert_path oldfs newfs oldpath: The encoding of oldpath (which is assumed to reside in oldfs) is converted to the encoding of newfs and returned.
copy [Netfs]
copy orig_fs orig_name dest_fs dest_name: Copies the file orig_name from orig_fs to the file dest_name in dest_fs.
copy [Netmcore_heap]
Creates a deep copy of the input value, and stores the duplicate in normal process memory.
copy_command [Shell_sys]
Returns a duplicate of the command description
copy_cursor [Netconversion]
Copies the cursor.
copy_e [Uq_io]
let e = copy_e d_in d_out: Copies data from d_in to d_out, and transitions to `Done n when all data is copied (where n are the number of copied bytes).
copy_env [Shell_sys]
Copies an environment
copy_into [Netfs]
copy_into orig_fs orig_name dest_fs dest_name: Like copy, but this version also supports recursive copies.
copy_mstring [Xdr_mstring]
Create a copy
copy_mstrings [Xdr_mstring]
Create a copy
copy_value [Netsys_mem]
copy_value flags v: Creates a deep copy of v and returns it.
cots_connect [Rpc_xti_client]
The first parameter is the name of the TLI/XTI device.
cp_set_env [Netsys_win32]
Returns the CP_set_env option for this array of environment variables (in the Unix.environment format)
create [Rpc_server]
Deprecated creation of an RPC server.
create [Rpc_portmapper]
Connects to the portmapper service listening on the given connector.
create [Rpc_simple_client]
Create a simple client that connects with the given server using the given protocol type.
create [Rpc_client]
Opens a connection to the server specified by the connector.
create [Rpc_program]
create program_nr version_nr type_system procedures
create [Rpc_key_service]
Connects to the keyserv daemon.
create [Netpagebuffer]
create blocksize: creates new buffer with this blocksize, which must be a whole multiple of the page size of the OS
create [Netdate]
Convert the time (seconds since the epoch) to a date/time record
create [Netbuffer]
Creates a netbuffer which allocates initially this number of bytes.
create [Netplex_semaphore]
Create the semaphore with this initial value.
create [Netplex_main]
Creates the command-line configuration object.
create [Netmcore_hashtbl]
Hashtbl.create pool h creates a new, empty hash table in pool with a header h.
create [Netmcore_matrix]
create pool_id n2 a h: Creates a matrix by deeply copying a normal array a and using the copy of h as header.
create [Netmcore_buffer]
create pool bsize h: Creates a buffer in pool with a block size of bsize.
create [Netmcore_queue]
create pool h: Creates an empty queue in the pool, with header h
create [Netmcore_mutex]
create m t: Creates a mutex of type t, and pushes it to the heap, using the mutator m.
create [Netmcore_sem]
create m value: Creates a semaphore with initial value, and pushes it to the heap, using the mutator m.
create [Netmcore_array]
create pool_id a h: Creates a shared array by deeply copying a normal array a and using the copy of h as header
create [Uq_libevent.LIBOEVENT]
create [Equeue]
Creates a new event system that has an event source, but is otherwise empty.
create2 [Rpc_server]
Creates a server according to the mode2 argument.
create2 [Rpc_client]
New style clients: Opens a connection to the server specified by mode2.
create_address_list_tokens [Netsendmail]
Returns the list of s_tokens representing email addresses as structured value.
create_admin_container [Netplex_container]
Internally used.
create_aggressive_cache [Http_client]
This type of cache tries to keep connections as long open as possible.
create_boundary [Mimestring]
Creates a boundary string that can be used to separate multipart messages.
create_camlbox [Netmcore_camlbox]
create_camlbox prefix n size: Creates a new camlbox with a unique name derived from prefix.
create_camlbox [Netcamlbox]
create_camlbox addr n size: Creates a new camlbox for up to n messages of size bytes.
create_client [Rpc_portmapper_clnt.PMAP.V2]
create_client2 [Rpc_portmapper_clnt.PMAP.V2]
create_client_session [Netmech_scram]
create_client_session p username password: Creates a new client session for profile p so that the client authenticates as user username, and proves its identify with the given password.
create_condition [Netmcore_condition]
create m: Creates a condition variable, and pushes it to the heap, using the mutator m.
create_constant_workload_manager [Netplex_workload]
A constant number of threads is created (the int argument).
create_container [Netplex_container]
The container for normal services
create_controller [Netplex_controller]
Create a controller with the default event system
create_controller_for_esys [Netplex_controller]
Create a controller for the passed event system
create_cursor [Netconversion]
Creates a new cursor for the passed string and the passed encoding.
create_dynamic_workload_manager [Netplex_workload]
create_env [Shell_sys]
Creates an empty environment
create_event [Netsys_win32]
Create an event object
create_event [Netsys_posix]
Creates a new event file descriptor.
create_event_aggregator [Netsys_posix]
create_event_aggregator is_interruptible: Creates a new aggregator, and allocates the required OS resources.
create_event_system [Uq_libevent.POLLSET]
create_heap [Netmcore_heap]
create_heap pool_id size root: Creates a new heap with size bytes in the pool identified by pool_id.
create_in_buffer [Uq_io]
Provides a buffered version of the in_device.
create_inet [Rpc_portmapper]
Connects to a portmapper listening on an Internet port.
create_input_netbuffer [Netchannels]
Creates an input channel and a shutdown function for a netbuffer.
create_input_thread [Netsys_win32]
Creates the input thread for this file descriptor.
create_local_pipe_server [Netsys_win32]
create_mclient [Rpc_proxy.ManagedClient]
Create a managed client for this config connecting to this connector.
create_mclient_config [Rpc_proxy.ManagedClient]
create_mempool [Netmcore_mempool]
Creates the memory pool as shared memory object of the passed size (rounded up to the next multiple of pages) and returns the resource ID.
create_mic_token [Netgssapi]
Create a MIC token:
create_mime_scanner [Mimestring]
Creates a new mime_scanner scanning the passed string.
create_monitor [Uq_mt]
Creates a new monitor.
create_mset [Rpc_proxy.ManagedSet]
create_mset config services: The mset is created with config, and the services array describes which ports are available, and how often each port may be contacted (i.e.
create_mset_config [Rpc_proxy.ManagedSet]
Create a config record.
create_multiplex_controller_for_connected_socket [Uq_engines]
Creates a multiplex controller for a bidirectional socket (e.g.
create_multiplex_controller_for_datagram_socket [Uq_engines]
Creates a multiplex controller for datagram sockets (e.g.
create_out_buffer [Uq_io]
Provides a buffered version of the out_device.
create_output_thread [Netsys_win32]
Creates the output thread for this file descriptor.
create_poll_array [Netsys_posix]
Create a poll array with the given size.
create_pollset [Uq_libevent.POLLSET]
create_pool [Netsys_mem]
Create a new pool.
create_portmapped_client [Rpc_portmapper_clnt.PMAP.V2]
create_preallocated_shm [Netmcore]
create_preallocated_shm prefix size: Creates a new preallocated shm object with a unique name based on prefix, and a length of size bytes.
create_process [Netsys_win32]
create_process cmd cmdline options: Spawns a new process that runs concurrently with the calling process.
create_protocol [Netplex_kit]
create_protocol name addresses: Creates a protocol object from the passed arguments
create_rcache [Rpc_proxy.ReliabilityCache]
Creates a new cache object.
create_rcache_config [Rpc_proxy.ReliabilityCache]
Create a config record.
create_restrictive_cache [Http_client]
A restrictive cache closes connections as soon as there are no pending requests.
create_salt [Netmech_scram]
Creates a random string suited as salt
create_server_session [Netmech_scram]
create_server_session p auth: Creates a new server session with profile p and authenticator function auth.
create_server_socket [Netplex_sockserv]
create_server_socket service_name proto addr: Creates a server socket as specified in proto for the address addr and returns it.
create_socket_service [Netplex_sockserv]
Create the socket service (usually only internally used)
create_socket_service_config [Netplex_kit]
create_socket_service_config name protos ctrl_conf: Creates a socket_service_config object from the passed arguments
create_ssl_multiplex_controller [Uq_ssl]
Creates a multiplex controller for an SSL socket.
create_text_tokens [Netsendmail]
Returns the list of s_tokens representing an informal text as structured value.
create_timer [Netplex_cenv]
create_timer f tmo: Creates a timer with timeout value tmo: In tmo seconds f is called, and if this function returns true, the timer remains active, and another round of timing is arranged.
create_unique_shm [Netshm]
Create a shared memory object under a name that is derived from the passed shm_name.
create_unix_event_system [Unixqueue]
An alternate name for standard_event_system, provided for backward compatibility.
create_var [Netplex_sharedvar]
Create the variable with the passed name with an empty string (or the exception Sharedvar_null) as initial value.
create_wait_set [Netmcore_condition]
Creates a wait_set in the heap designated by the mutator
create_wrap_token_conf [Netgssapi]
Wraps a message so that it is encrypted and signed (confidential).
ctermid [Netsys_posix]
Returns the name of the controlling tty of the current process as pathname to a device file
ctrl_increment [Netplex_semaphore]
Increment the named semaphore from controller context, substituting an increment from a container (e.g.
current_dlogger [Netlog.Debug]
The current debug logger.
current_env [Shell_sys]
Returns the environment of the current process as abstract environment value
current_formatter [Netlog]
The current timestamp formatter
current_logger [Netlog]
The variable containing the current logger function.
current_resolver [Uq_resolver]
Returns the pluggable resolver
current_sys_id [Netplex_cenv]
Returns the system-dependent thread identifier of the caller (which must be in container or controller context)
cursor_at_end [Netconversion]
Returns whether the cursor is positioned past the last character.
cursor_blit [Netconversion]
cursor_blit cs ua pos len: Copies at most len characters as code points from the cursor position and the following positions to the array ua at index pos.
cursor_blit_maxlen [Netconversion]
Returns the maximum number of characters cursor_blit can copy at the current cursor position.
cursor_blit_positions [Netconversion]
Works like cursor_blit, but copies the byte positions of the characters into ua instead of the code points.
cursor_byte_length [Netconversion]
Returns the byte length of the representation of the character at the cursor.
cursor_char_count [Netconversion]
Returns the character count of the cursor.
cursor_encoding [Netconversion]
Returns the encoding of the cursor.
cursor_initial_rel_pos [Netconversion]
Returns the initial relative byte position of the cursor
cursor_pos [Netconversion]
Returns the byte position of the cursor, i.e.
cursor_range [Netconversion]
Returns the valid range of the cursor as pair (range_pos, range_len)
cursor_target [Netconversion]
Returns the string of the cursor

D
datagram_provider [Uq_engines]
This engine creates a datagram socket as demanded by the datagram_type, optionally using proxy for sending and receiving datagrams.
datagram_rpc_multiplex_controller [Rpc_transport]
The multiplex controller for datagrams
debug_c_wrapper [Netsys_win32.Debug]
Sets whether to debug the C wrapper part.
debug_info [Netmcore_heap]
Returns a multi-line debug string
debug_info [Netmcore_mempool]
Returns a string describing the allocations etc.
debug_rpc_internals [Rpc_netplex]
debug_rpc_service [Rpc_netplex]
These variables control debugging of Rpc_server.
decode [Nethtml]
Converts entities &name; and &#num; into the corresponding characters.
decode [Netencoding.Html]
The input string is recoded from in_enc to out_enc, and HTML entities (&name; or &#num;) are resolved.
decode [Netencoding.Url]
Option plus: Whether '+' is converted to space.
decode [Netencoding.Q]
decode [Netencoding.QuotedPrintable]
Decodes the string and returns it.
decode [Netencoding.Base64]
Decodes the given string argument.
decode_exported_name [Netgssapi]
Encode names as described in section 3.2 of RFC 2078
decode_mime_body [Netmime]
let ch' = decode_mime_body hdr ch: According to the value of the Content-transfer-encoding header field in hdr the encoded MIME body written to ch' is decoded and transferred to ch.
decode_query [Nethttp]
Splits the URI into a "script name" and a "query string"
decode_to_latin1 [Netencoding.Html]
decrement [Netplex_semaphore]
Decrement the named semaphore by 1, and return the new value.
decrypt [Rpc_key_service]
This function is used if this program is a server and wants to check the identity of a contacting client.
decrypt [Netmech_scram.AES_CTS]
decrypt_and_verify [Netmech_scram.Cryptosystem]
Decrypts the ciphertext and verifies the attached signature.
decrypt_and_verify_mstrings [Netmech_scram.Cryptosystem]
Same, but with data representation as mstring list
decrypt_mstrings [Netmech_scram.AES_CTS]
def_process [Netmcore_process]
let (fp,jp) = def_process proc: Defines a process (which must happen in the master process), so that:
def_process [Netmcore]
let fork_point, join_point = def_process f: Defines process types, i.e.
default_block_size [Netsys_mem]
The default block size, normally 64 K (or better, 16 times the page size)
default_config [Netcgi1_compat.Netcgi_env]
default_config [Netcgi]
The default configuration is: tmp_directory: Netsys_tmp.tmp_directory(), tmp_prefix: "netcgi", permitted_http_methods: `GET, `HEAD, `POST., permitted_input_content_types: "multipart/form-data", "application/x-www-form-urlencoded"., input_content_length_limit: maxint (i.e., no limit)., max_arguments = 10000 (for security reasons), workarounds: all of them., default_exn_handler: set to true. To create a custom configuration, it is recommended to use this syntax:
      let custom_config = { default_config with tmp_prefix = "my_prefix" }
      
(This syntax is also robust w.r.t.
default_connect_options [Uq_engines]
Returns the default options
default_host [Nethttpd_services]
Creates a host record that matches any request.
default_http_engine_config [Nethttpd_engine]
The default config: config_input_flow_control=false, config_output_flow_control=true
default_http_processor_config [Nethttpd_reactor]
Default configuration: Extends Nethttpd_kernel.default_http_protocol_config with config_timeout_next_request = 15.0, config_timeout = 300.0, config_cgi = Netcgi.default_config, config_error_response = Nethttpd_util.std_error_response, config_log_error: Uses Nethttpd_util.std_error_log_string to write a log message via Netlog., config_log_access: is a no-op
default_http_protocol_config [Nethttpd_kernel]
Default config: config_max_reqline_length = 32768, config_max_header_length = 65536, config_max_trailer_length = 32768, config_limit_pipeline_length = 5, config_limit_pipeline_size = 65536, config_announce_server = `Ocamlnet, config_suppress_broken_pipe = false
default_http_reactor_config [Nethttpd_reactor]
Default configuration: Extends Nethttpd_reactor.default_http_processor_config with config_reactor_synch = `Write
default_listen_options [Uq_engines]
Returns the default options
default_pool [Netsys_mem]
The default pool with the default block size.
default_resolver [Uq_resolver]
The default resolver uses Unix.gethostbyname to look up names.
default_services [Nethttpd_plex]
The default services
default_socket_config [Rpc_server]
default_socket_config [Rpc_client]
Default configuration with non_blocking_connect = true
default_url [Neturl]
Adds missing components and returns the modified URL.
default_value [Netshm_array]
Returns the default value
del [Uq_libevent.LIBOEVENT]
del_event_source [Netsys_posix]
Removes the source from the aggregator
delay_engine [Uq_engines]
Same as function
delete [Netulex.ULB]
Deletes the number of characters from unicode_lexbuf.
delete [Netbuffer]
delete nb k n: Deletes the n bytes at position k of netbuffer nb in-place.
delete_hd [Netpagebuffer]
delete_hd b n: Deletes n bytes from the beginning of the buffer
delete_hd [Netmcore_buffer]
delete_hd b n: Deletes n bytes from the beginning of the buffer.
delete_method [Ftp_client]
Deletes the named file
delete_var [Netplex_sharedvar]
delete_var name: Deletes the variable name.
der_to_oid [Netgssapi]
Convert OID's to/from DER.
deref [Netmcore_matrix]
Returns the raw array in shared memory for unprotected access
deref [Netmcore_array]
Returns the raw array in shared memory for unprotected access
deref_c [Netmcore_ref]
deref_c sr: Returns a copy of the contents of sr.
deref_p [Netmcore_ref]
deref_p sr f: Runs f with the contents of sr, and returns the result of f.
deref_ro [Netmcore_ref]
Dereferences the variable and returns the contents, comparable to !.
derive_key_rfc3961_simplified [Netauth]
Derives a special key from a base key, as described in RFC 3961.
derive_keys [Netmech_scram.Cryptosystem]
derive_keys protocol_key usage: Returns the specific keys for this protocol_key and this usage numbers.
derive_rcache [Rpc_proxy.ReliabilityCache]
derive_cache parent config: Returns a new cache that shares the error counters with parent.
descr_of_buffer [Netmcore_buffer]
Returns the descriptor
descr_of_hashtbl [Netmcore_hashtbl]
Returns the descriptor
descr_of_heap [Netmcore_heap]
Get the descriptor of a heap
descr_of_sarray [Netmcore_array]
Returns the descriptor
descr_of_sarray2 [Netmcore_matrix]
Returns the descriptor
descr_of_squeue [Netmcore_queue]
Returns the descriptor
descr_of_sref [Netmcore_ref]
Returns the descriptor
dest_fp4 [Rtypes]
dest_fp4 [Netnumber]
dest_fp8 [Rtypes]
dest_fp8 [Netnumber]
dest_int4 [Rtypes]
dest_int4 [Netnumber]
dest_int8 [Rtypes]
dest_int8 [Netnumber]
dest_uint4 [Rtypes]
dest_uint4 [Netnumber]
dest_uint8 [Rtypes]
dest_<t> destroy integer values and returns the corresponding char tuples.
dest_uint8 [Netnumber]
dest_<t> destroy integer values and returns the corresponding char tuples.
dest_url_encoded_parameters [Netencoding.Url]
The argument is the URL-encoded parameter string.
dest_xv_array [Xdr]
dest_xv_array_of_string_fast [Xdr]
dest_xv_double [Xdr]
dest_xv_enum [Xdr]
dest_xv_enum_fast [Xdr]
dest_xv_float [Xdr]
dest_xv_hyper [Xdr]
dest_xv_int [Xdr]
dest_xv_mstring [Xdr]
dest_xv_opaque [Xdr]
dest_xv_string [Xdr]
dest_xv_struct [Xdr]
dest_xv_struct_fast [Xdr]
dest_xv_uhyper [Xdr]
dest_xv_uint [Xdr]
dest_xv_union_over_enum [Xdr]
dest_xv_union_over_enum_fast [Xdr]
dest_xv_union_over_int [Xdr]
dest_xv_union_over_uint [Xdr]
dest_xv_void [Xdr]
destroy [Netplex_semaphore]
Destroy this semaphore.
destroy [Netmcore_buffer]
Destroys the buffer
destroy [Netmcore_mutex]
Destroys the mutex
destroy [Netmcore_sem]
Destroys the semaphore
destroy [Netmcore_heap]
Destroys the heap and gives the memory back to the pool
destroy_condition [Netmcore_condition]
destroy_event [Netsys_posix]
Releases the OS resources.
destroy_event_aggregator [Netsys_posix]
Frees all OS resources
destroy_resources [Netmcore]
Destroys all resources that may be left
destroy_wait_set [Netmcore_condition]
Destroys these objects
detach [Rpc_server]
Internal function.
device_supports_memory [Uq_io]
Returns whether `Memory buffers are supported
dim [Netmcore_matrix]
Returns the dimenstions
disable_all [Netlog.Debug]
Disable all modules (the default)
disable_for_client [Rpc_client.Debug]
Disables all log messages for this client (internally used)
disable_for_server [Rpc_server.Debug]
Disables logging for this server
disable_module [Netlog.Debug]
Enable or disable the passed module M (e.g.
discard_request_body [Netcgi_apache.Apache.Request]
Discard client request body.
domain [Nethttp.Cookie]
The domain of the cookie, if set.
domain [Netcgi.Cookie]
The domain of the cookie, if set.
domain [Netcgi_common.Cookie]
domain_of_inet_addr [Netsys]
Returns the socket domain of Internet addresses, i.e.
domainname [Rpc_auth_dh]
Returns the NIS domain name.
dummy [Netmcore_mutex]
A dummy mutex is non-functional, but can be used to put something into mutex-typed variables
dummy [Netmcore_sem]
A dummy semaphore is non-functional, but can be used to put something into semaphore-typed variables
dummy_condition [Netmcore_condition]
A dummy condition is non-functional, but can be used to put something into condition-typed variables
dummy_wait_set [Netmcore_condition]
A dummy wait_set is non-functional, but can be used to put something into wait_set-typed variables
dump [Rpc_portmapper]
returns the list of known mappings.
dump [Netshm]
dump [Netplex_sharedvar]
Dumps the access counter of this variable to Netlog.
dynamic_service [Nethttpd_services]
Configures the dynamic service.
dynamic_workload_manager_factory [Netplex_workload]
Reads a workload_manager section like

E
emulated_pid [Netsys_win32]
Returns the MSVCRT.DLL notion of the process identifier (pid).
enable [Shell_sys.Debug]
Enables Netlog-style debugging of this module
enable [Rpc_auth_gssapi.Debug]
enable [Rpc_server.Debug]
Whether debug messages of general kind are enabled.
enable [Rpc_client.Debug]
Whether debug messages are enabled.
enable [Rpc_transport.Debug]
Enables Netlog-style debugging
enable [Netsys_signal.Debug]
Enables Netlog-style debugging of this module
enable [Netsys_pollset_win32.Debug]
Enables Netlog-style debugging of this module
enable [Netsys_win32.Debug]
Enables Netlog-style debugging of the Ocaml wrapper
enable [Netsys_posix.Debug]
Enables Netlog-style debugging
enable [Netsys.Debug]
Enables Netlog-style debugging
enable [Netstring_str.Debug]
enable [Netplex_cenv.Debug]
Enables Netlog-style debugging
enable [Netplex_container.Debug]
Enables debug logging of containers
enable [Netplex_controller.Debug]
enable [Netmcore_condition.Debug]
enable [Netmcore_heap.Debug]
enable [Netmcore_mempool.Debug]
Enable debugging
enable [Netmcore.Debug]
enable [Netmech_scram.Debug]
Enable debugging of this module
enable [Nethttpd_services.Debug]
enable [Nethttpd_engine.Debug]
Enables Netlog-style debugging of this module
enable [Nethttpd_reactor.Debug]
Enables Netlog-style debugging of this module
enable [Nethttpd_kernel.Debug]
Enables Netlog-style debugging of this module
enable [Ftp_client.Debug]
Enables Netlog-style debugging of this module
enable [Telnet_client.Debug]
Enables Netlog-style debugging of this module By default, the exchanged Telnet commands are logged.
enable [Http_client.Debug]
Enables Netlog-style debugging of this module
enable [Uq_ssl.Debug]
Enables Netlog-style debugging of this module
enable [Uq_engines.Debug]
Enables Netlog-style debugging
enable [Unixqueue.Debug]
Enable Netlog debugging
enable [Equeue.Debug]
Enable Netlog debugging
enable_all [Netlog.Debug]
Enable all modules
enable_alloc [Netmcore_mempool.Debug]
Trace allocation and deallocation
enable_ctrace [Rpc_server.Debug]
Whether debug messages are enabled that trace connection events.
enable_fd_tracking [Netlog.Debug]
By setting to true, each track_fd and release_fd is logged.
enable_module [Netlog.Debug]
enable_ptrace [Rpc_server.Debug]
Whether the procedure trace is enabled.
enable_ptrace [Rpc_client.Debug]
Whether the procedure trace is enabled as debug messages.
encode [Nethtml]
Converts problematic characters to their corresponding entities.
encode [Netencoding.Html]
The input string that is encoded as in_enc is recoded to out_enc, and the following characters are encoded as HTML entity (&name; or &#num;): The ASCII characters contained in unsafe_chars, The characters that cannot be represented in out_enc. By default (out_enc=`Enc_usascii), only ASCII characters can be represented, and thus all code points >= 128 are encoded as HTML entities. If you pass out_enc=`Enc_utf8, all characters can be represented. For example, the string "(a<b) & (c>d)" is encoded as "(a&lt;b) &amp; (c&gt;d)".
encode [Netencoding.Url]
Option plus: Whether spaces are converted to '+'.
encode [Netencoding.Q]
Note: All characters except alphanumeric characters are protected by hex tokens.
encode [Netencoding.QuotedPrintable]
Encodes the string and returns it.
encode [Netencoding.Base64]
Compute the "base 64" encoding of the given string argument.
encode_exported_name [Netgssapi]
encode_from_latin1 [Netencoding.Html]
encode_mime_body [Netmime]
let ch' = encode_mime_body hdr ch: According to the value of the Content-transfer-encoding header field in hdr the unencoded MIME body written to ch' is encoded and transferred to ch.
encoding_of_glob_expr [Netglob]
Returns the encoding
encoding_of_string [Netconversion]
Returns the encoding of the name of the encoding.
encrypt [Rpc_key_service]
This function is used if this program is a client and wants to contact a server.
encrypt [Netmech_scram.AES_CTS]
encrypt_and_sign [Netmech_scram.Cryptosystem]
Encrypts the plaintext message and adds a signature to the ciphertext.
encrypt_and_sign_mstrings [Netmech_scram.Cryptosystem]
Same, but with data representation as mstring list
encrypt_mstrings [Netmech_scram.AES_CTS]
enforce_unavailability [Rpc_proxy.ManagedClient]
Enforces that all pending procedure calls get the Service_unavailable exception, and that the client is shut down.
ensure_absolute_url [Neturl]
If the anonymous URL is absolute, it is just returned as result of this function.
eof_as_none [Uq_io]
Represents EOF as None.
eps_e [Uq_engines.Operators]
Same as epsilon_engine
epsilon [Unixqueue]
The execution of the function is pushed onto the event queue (minimal delay)
epsilon_engine [Uq_engines]
Same as function
err_headers_out [Netcgi_apache.Apache.Request]
request_rec err_headers_out field.
error_page [Netcgi_common]
error_page env status fields msg detail: Logs an error message and outputs an error page via env.
event_aggregator_fd [Netsys_posix]
Returns the underlying file descriptor.
event_descr [Netsys_win32]
Returns the proxy descriptor for the event.
event_system [Rpc_proxy.ManagedSet]
Return the event system
event_system [Rpc_proxy.ManagedClient]
Return the event system
event_system [Rpc_client]
Returns the unixqueue to which the client is attached
event_wait [Netsys_win32]
Wait until the event is set to signaled state.
execute [Shell_fs]
Starts this command.
exists_resource [Unixqueue]
Find out if a specific resource already exists (or better: is already watched by an operation).
exn_handler_default [Netcgi_common]
exn_handler_default env ~exn_handler ~finally run_cgi will basically execute exn_handler env run_cgi.
expand_glob_expr [Netglob]
Resolve generative sub expressions by expanding them.
expanded_xdr_type [Xdr]
expanded_xdr_type_term [Xdr]
extract_call_gssapi_header [Rpc_packer]
extract_config [Netplex_controller]
Extracts the controller config
extract_url_scheme [Neturl]
Returns the URL scheme from the string representation of an URL.

F
faccessat [Netsys_posix]
Same as Unix.access but the file is taken relative to the directory given by first argument
factory [Netcgi_plex]
Reads a Netplex configuration section like
    processor {
      type = "netcgi";          (* or the overridden [name] *)
      timeout = 15;             (* optional *)
      mount_dir = "/url/path";  (* optional *)
      mount_at = "/url/path";   (* optional alternative to mount_dir *)
    }
 
fadvise [Netsys_posix]
Advises to load pages into the page table from the file, or to remove such pages.
fallocate [Netsys_posix]
Allocate space for the file and the specified file region
fcgi_processor [Netcgi_plex]
fchdir [Netsys_posix]
Set the current directory to the directory referenced by the file descriptor
fd_event_source [Netsys_posix]
Wraps a file descriptor as event_source, and monitors the events in poll_req_events.
fd_string [Netlog.Debug]
Return a string for generating debug messages.
fd_table [Netlog.Debug]
Returns the table of descriptors as list of lines.
fdatasync [Netsys_posix]
Syncs only data to disk.
fdopendir [Netsys_posix]
Make a directory handle from a file descriptor.
feat_method [Ftp_client]
Get the list of feature tokens (see also Ftp_client.ftp_state.ftp_features)
fg_blue [Netsys_win32]
fg_green [Netsys_win32]
fg_intensity [Netsys_win32]
fg_red [Netsys_win32]
fields [Netcgi_apache.Apache.Table]
Table.fields tbl returns a list of (key, value) pairs consisting of all entries of the table tbl.
file_descr_of_int [Netsys_posix]
Make a file descriptor from an integer
file_logger [Netplex_log]
Writes messages to this file
file_logger_factory [Netplex_log]
Reads a logging section like
file_logger_from_obj [Netplex_log]
Writes messages to this file
file_service [Nethttpd_services]
Configures a file service
file_translator [Nethttpd_services]
Translates an URI path to a file name.
file_url_of_local_path [Neturl]
Generates a URL with "file" scheme from the passed path name.
filename [Netcgi_apache.Apache.Request]
request_rec filename field.
fill_random [Netsys_rng]
Fills this string with random bytes
fill_random [Netsys_win32]
Fills the string with random bytes.
filter_out_buffer [Uq_io]
filter_out_buffer ~max p d: The data written to this device is redirected via pipe p and finally written to d.
find [Netshm_hashtbl]
find tbl key: Finds the current binding of key in tbl or raises Not_found if no such binding exists.
find [Netshm]
find tbl key: Finds the current binding of key in tbl or raises Not_found if no such binding exists.
find_all [Netshm_hashtbl]
find_all tbl key returns the list of all data associated with key in tbl.
find_all [Netshm]
find_all tbl key returns the list of all data associated with key in tbl.
find_all_c [Netmcore_hashtbl]
Version of find_all with copied result
find_all_p [Netmcore_hashtbl]
Version of find_all with pinned result
find_all_ro [Netmcore_hashtbl]
Hashtbl.find_all tbl x returns the list of all data associated with x in tbl.
find_c [Netmcore_hashtbl]
Like find but returns a copy of the binding in normal RAM
find_double_line_start [Mimestring]
find_double_line_start s pos len: Searches two adjacent line ends (each may be a CR/LF combination or a single LF), and returns the position after the second line end.
find_line_end [Mimestring]
find_line_end s pos len: Searches the next line end (CR/LF or only LF), and returns the position.
find_line_start [Mimestring]
find_line_start s pos len: Searches the next start, and returns its position.
find_p [Netmcore_hashtbl]
find_p tbl x f looks up the current binding of x in tbl, and calls f with this binding as argument.
find_pattern [Netaux.KMP]
find_ro [Netmcore_hashtbl]
find_ro tbl x returns the current binding of x in tbl, or raises Not_found if no such binding exists.
finfo [Netcgi_apache.Apache.Request]
request_rec finfo field.
finish_job [Shell_sys]
This creates a job_engine internally and runs until it is finished, i.e.
first_chars [Netstring_pcre]
The last n characters of a string
first_chars [Netstring_str]
Same as string_before
fix_MSIE_Content_type_bug [Netcgi_common]
fix_MSIE_Content_type_bug ct transforms the content-type string ct to fix the MSIE Content-Type bug.
fixup_url_string [Neturl]
Escapes some unsafe or "unwise" characters that are commonly used in URL strings: space, < > { } ^ \\ | and double quotes.
float_of_fp4 [Rtypes]
float_of_fp4 [Netnumber]
float_of_fp8 [Rtypes]
float_of_fp8 [Netnumber]
float_var [Netplex_cenv]
flush_e [Uq_io]
let e = flush_e d: If d has an internal buffer, all data is written out to d.
fmap_engine [Uq_engines]
Same as function
fold [Netshm_hashtbl]
fold f tbl init computes (f kN dN ... (f k1 d1 init)...), where k1 ... kN are the keys of all bindings in tbl, and d1 ... dN are the associated values.
fold [Netshm]
fold f tbl init computes (f kN dN ... (f k1 d1 init)...), where k1 ... kN are the keys of all bindings in tbl, and d1 ... dN are the associated values.
fold [Netmcore_queue]
fold f accu q
fold_header [Mimestring]
fold_header f acc0 s pos len: Parses a MIME header in the string s from pos to exactly pos+len.
fold_lines [Mimestring]
fold_lines f acc0 s pos len: Splits the substring of s from pos to pos+len into lines, and folds over these lines like List.fold_left.
fold_lines_p [Mimestring]
fold_lines_p f acc0 s pos len: Splits the substring of s from pos to pos+len into lines, and folds over these lines like List.fold_left.
foreground [Netplex_main]
Returns whether the daemon runs in the foreground
forget_subprocess [Netsys_posix]
Frees OS resources.
format [Netdate]
Format a date/time record as a string
format_camlbox [Netcamlbox]
format_camlbox fd n size: The file fd is mapped into memory, and formatted as camlbox.
format_field_value [Netsendmail]
To put sval, an s_token list, into the header field name, call
format_timestamp [Netlog]
format_timestamp fmt digits (seconds,nanos): Formats the timestamp (seconds,nanos) and returns the string.
format_to [Netdate]
Format a date/time record according to the format string and outputs the resulting string to the channel.
fp4_as_string [Rtypes]
fp4_as_string [Netnumber.ENCDEC]
fp4_of_float [Rtypes]
fp4_of_float [Netnumber]
fp4_of_fp8 [Rtypes]
Note fp4_of_fp8: This conversion is not exact.
fp4_of_fp8 [Netnumber]
Note fp4_of_fp8: This conversion is not exact.
fp8_as_string [Rtypes]
fp8_as_string [Netnumber.ENCDEC]
fp8_of_float [Rtypes]
fp8_of_float [Netnumber]
Note fp4_of_float: The same problems as in fp4_of_fp8 may arise
fp8_of_fp4 [Rtypes]
fp8_of_fp4 [Netnumber]
free_mem [Netmcore_mempool]
Frees this allocated block
free_wait_entry [Netmcore_condition]
Frees a wait_entry
free_wait_entry_e [Netmcore_condition]
Frees a wait_entry_e.
from_dev_null [Shell]
A producer taking the data from /dev/null.
from_fd [Shell]
Creates a producer taking the data from the file descriptor passed to this function.
from_file [Shell]
Creates a producer taking the data from the file whose name is passed to this function.
from_function [Shell]
Creates a producer taking the data from a function.
from_function [Netulex.ULB]
Creates a unicode_lexbuf to analyse strings of the passed encoding coming from the refill function.
from_in_obj_channel [Netulex.ULB]
Creates a unicode_lexbuf to analyse strings of the passed encoding coming from the object channel.
from_stream [Shell]
Creates a producer taking the data from a stream of strings.
from_stream [Shell_sys]
from_stream ?epipe s returns a function which can be used as producer argument for add_producer.
from_string [Shell]
Creates a producer taking the data from a string s.
from_string [Shell_sys]
from_string ?pos ?len ?epipe s returns a function which can be used as producer argument for add_producer.
from_string [Netulex.ULB]
Creates a unicode_lexbuf analysing the passed string encoded in the passed encoding.
from_string_inplace [Netulex.ULB]
Creates a unicode_lexbuf analysing the passed string encoded in the passed encoding.
from_ulb_lexbuf [Netulex.Ulexing]
Creates a new lexbuf from the unicode_lexbuf.
from_unicode [Netconversion]
Maps the Unicode code point to the corresponding code point of the charset, or raises Cannot_represent when there is no such corresponding code point.
fsync [Netsys_posix]
Sync data and metadata to disk
ftp_fs [Ftp_fs]
Same as function
full_split [Netstring_pcre]
Splits into at most n substrings, based on split_delim
full_split [Netstring_str]
Like split_delim, but returns the delimiters in the result
fwd_dlogger [Netlog.Debug]
The standard debug logger simply prepends the module name to the message (separated by ": "), and calls the current logger to print it

G
gai_resolver [Uq_resolver]
This resolver uses Unix.getaddrinfo.
gc [Netmcore_heap]
Lock the heap and do a GC pass
gclose [Netsys]
Shuts down the system object referenced by the descriptor so far possible, and closes the descriptor.
ge_uint4 [Rtypes]
Other comparisons
ge_uint4 [Netnumber]
Other comparisons
ge_uint8 [Netnumber]
Other comparisons
generate [Rpc_key_service]
Generates a new conversation key (a 64 bit random number)
get [Netbuffer]
get nb pos: Get the character at pos
get [Netshm_array]
get a k: Returns the contents of the array element number k where 0 <= k < length a.
get [Netplex_semaphore]
Get the value of the named semaphore.
get [Netplex_cenv.VAR_TYPE]
get [Netcgi_dbi.DBI_POOL]
Example: module MyPool = DbiPool(Dbi_postgres)
get [Netcgi_common.Cookie]
Decode the cookie header, may they be version 0 or 1.
get [Netcgi_apache.Apache.Table]
Table.get tbl key returns the corresponding entry in the table.
get_accept [Nethttp.Header]
Returns the Accept header as list of triples (media_range, media_range_params, accept_params).
get_accept_charset [Nethttp.Header]
Returns the Accept-charset header as list of pairs (charset,params).
get_accept_encoding [Nethttp.Header]
Returns the Accept-encoding header as list of pairs (coding,params).
get_accept_language [Nethttp.Header]
Returns the Accept-language header as list of pairs (lang_range,params).
get_accept_ranges [Nethttp.Header]
Returns the Accept-ranges header as list of tokens.
get_active_code_page [Netsys_win32]
Get the active code page.
get_age [Nethttp.Header]
Returns the Age header as number
get_all [Netcgi_apache.Apache.Table]
Table.get_all tbl key same as Table.get tbl key except it returns all values corresponding to the key.
get_allow [Nethttp.Header]
Returns the Allow header as list of tokens.
get_arguments [Shell_sys]
Returns the argument array of the command (skipping the command name)
get_assignments [Shell_sys]
Returns the list of assignments (fd_from,fd_to)
get_auth_method [Rpc_server]
Returns the method that was used to authenticate the user.
get_authorization [Nethttp.Header]
Returns the Authorization header as pair (auth_scheme,auth_params), or raises Not_found if not present.
get_basic_auth_pw [Netcgi_apache.Apache.Request]
Get the password sent in basic authentication.
get_c [Netmcore_matrix]
get_c sa k1 k2: Gets a copy of the (k1,k2)-th element of the matrix sæ
get_c [Netmcore_array]
get_c sa k: Gets a copy of the k-th element of the shared array sæ
get_cache_control [Nethttp.Header]
Returns the Cache-control header as list of tokens.
get_charset [Mimestring]
Return the decoded word (the contents of the word after decoding the "Q" or "B" representation), and the character set of the decoded word (uppercase).
get_charset [Ftp_client]
get_chdir [Shell_sys]
Returns the chdir parameter of the command
get_client_block [Netcgi_apache.Apache.Request]
Get client request data.
get_client_block_buf [Netcgi_apache.Apache.Request]
get_client_block_buf r buf ofs len read a chunk of data and puts it in buf.[ofs .. ofs+len-1].
get_cmdname [Shell_sys]
Returns the name of the command
get_column [Mimestring]
Return the column of the line where the token starts (first column is number 0)
get_column_of_scanner [Mimestring]
Return the current position, line, and column of a mime_scanner.
get_conn_peer_name [Rpc_server]
Return the address of the socket serving the connection, and the client socket, resp.
get_conn_socket_name [Rpc_server]
get_connection [Nethttp.Header]
Returns the Connection header as list of tokens.
get_connection_id [Rpc_server]
Get the connection_id
get_console_attr [Netsys_win32]
get_console_info [Netsys_win32]
Get r/o console info.
get_console_input [Netsys_win32]
Get the input stream of the console.
get_console_mode [Netsys_win32]
get_console_output [Netsys_win32]
Get the output stream of the console.
get_content_encoding [Nethttp.Header]
Returns the Content-encoding header as list of tokens.
get_content_language [Nethttp.Header]
Returns the Content-language header as list of tokens.
get_content_length [Nethttp.Header]
Returns the Content-length header as number.
get_content_location [Nethttp.Header]
Returns the Content-location header as string.
get_content_md5 [Nethttp.Header]
Returns the Content-MD5 header as string.
get_content_range [Nethttp.Header]
Returns the Content-range header as `Bytes(byte_range_resp_spec, instance_length).
get_content_type [Nethttp.Header]
Returns the Content-type header as pair (media_type, params).
get_cookie [Nethttp.Header]
Get the (Netscape) cookies as (name,value) pairs (or Not_found).
get_cookie_ct [Nethttp.Header]
Get the cookies in the Nethttp.Cookie.t representation (the suffix "_ct" reminds of Cookie.t).
get_create [Ftp_client]
get_custom_ops [Netsys_mem]
Returns custom ops for a sample value (or Invalid_argument)
get_date [Nethttp.Header]
Returns the Date header as number (seconds since the Epoch).
get_decoded_word [Mimestring]
get_descriptors [Shell_sys]
Returns the list of active descriptors
get_ec [Netmech_scram.Cryptosystem]
let ec = get_ec e_keys n: Returns the required value for the "extra count" field of RFC 4121 if the plaintext message has size n.
get_enc_lazily [Netplex_sharedvar]
Same for encapsulated values
get_enc_value [Netplex_sharedvar]
get_enc_value name: Gets the value of the variable name.
get_env [Shell_sys]
Gets the contents of the environment as string array
get_env_var [Shell_sys]
Returns the value of the variable in the environment
get_environment [Shell_sys]
Returns the designated environment of the command
get_etag [Nethttp.Header]
Returns the Etag header.
get_event_fd [Netsys_posix]
Returns a duplicate of the underlying file descriptor.
get_event_system [Rpc_server]
Find out the event system that contains the 'session'
get_expect [Nethttp.Header]
Returns the Expect header as list of triples (token,value,params).
get_expires [Nethttp.Header]
Returns the Expires header as number (seconds since the Epoch).
get_fd_of_event_source [Netsys_posix]
Get the file descriptor wrapped by this event source
get_fd_style [Netsys]
Get the file descriptor style
get_file [Netmcore]
Gets the file with this ID (or raises No_resource).
get_filename [Shell_sys]
Returns the file name of the executable
get_from [Nethttp.Header]
Returns the From header as string.
get_from_unicode [Netmappings]
get_host [Nethttp.Header]
Returns the Host header as pair (host,port).
get_host_by_name [Uq_resolver]
Look up the host, and return the host entry or raise the exception Host_not_found.
get_if_match [Nethttp.Header]
Returns the If-match header.
get_if_modified_since [Nethttp.Header]
Returns the If-modified-since header as number (seconds since the Epoch).
get_if_none_match [Nethttp.Header]
Returns the If-none-match header.
get_if_range [Nethttp.Header]
Returns the If-range header.
get_if_unmodified_since [Nethttp.Header]
Returns the If-unmodified-since header as number (seconds since the Epoch).
get_lang [Ftp_client]
get_language [Mimestring]
Returns the language if the token is an EncodedWord, and "" for all other tokens.
get_last_modified [Nethttp.Header]
Returns the Last-modified header as number (seconds since the Epoch).
get_last_proc_info [Rpc_server]
Get a debug string describing the last invoked procedure
get_lazily [Netplex_sharedvar]
get_lazily name f: Uses the variable name to ensure that f is only invoked when get_lazily is called for the first time, and that the value stored in the variable is returned the next times.
get_length [Mimestring]
Return the length of the token in bytes
get_line [Mimestring]
Return the line number where the token starts (numbering begins usually with 1)
get_line_of_scanner [Mimestring]
get_localzone [Netdate]
Retrieves the current offset for the local time zone
get_location [Nethttp.Header]
Returns the Location header as string.
get_main_socket_name [Rpc_server]
Returns the address of the server socket, or the address of the bidirectional pipe.
get_max_forwards [Nethttp.Header]
Returns the Max-forwards header as number.
get_media_type [Ftp_client]
get_method [Ftp_client]
This FTP method walks to the right directory and gets file from the server.
get_mic [Netmech_scram.Cryptosystem]
Returns a message integrity code
get_mic_mstrings [Netmech_scram.Cryptosystem]
Same, but with data representation as mstring list
get_modify [Ftp_client]
get_name [Ftp_client]
get_nonblock [Netsys_posix]
Returns whether the nonblock flag is set
get_p [Netmcore_matrix]
get_p sa k1 k2 f: Gets the (k1,k2)-th element of the matrix sa and call f with this element, and returns the result of f.
get_p [Netmcore_array]
get_p sa k f: Gets the k-th element of the shared array sa and call f with this element, and returns the result of f.
get_peer_credentials [Rpc_auth_local]
Return the pair (euid,egid) for a Unix domain socket.
get_peer_name [Rpc_server]
Return the address of the socket serving the session, and the client socket, resp.
get_peer_name [Rpc_client]
Return the addresses of the client socket and the server socket, resp.
get_perm [Ftp_client]
get_poll_cell [Netsys_posix]
get_poll_cell a k: Returns the poll cell k.
get_pos [Mimestring]
Return the byte position where the token starts in the string (the first byte has position 0)
get_pos_of_scanner [Mimestring]
get_pragma [Nethttp.Header]
Returns the Pragma header as list of pairs (token,value).
get_process_status [Netsys_win32]
Returns the process result if the process is finished, and None otherwise
get_protocol [Rpc_server]
Return whether Tcp or Udp
get_protocol [Rpc_client]
Get the protocol flavour
get_proxy_authenticate [Nethttp.Header]
Returns the Proxy-authenticate header as list of challenges (auth_scheme,auth_params).
get_proxy_authorization [Nethttp.Header]
Returns the Proxy-authorization header as pair (auth_scheme,auth_params).
get_range [Nethttp.Header]
Returns the Range header as `Bytes ranges, where the list ranges has elements of the form (Some first_pos, Some last_pos), (Some first_pos, None) (prefix range), or (None, Some last_pos) (suffix range).
get_referer [Nethttp.Header]
Returns the Referer header as string.
get_referrer [Nethttp.Header]
Same, for addicts of correct orthography
get_resource [Netmcore]
Retrieves the resource by ID.
get_retry_after [Nethttp.Header]
Returns the Retry-after header.
get_ro [Netmcore_matrix]
get_ro sa k1 k2: Gets the (k1,k2)-th element of the matrix sa.
get_ro [Netmcore_array]
get_ro sa k: Gets the k-th element of the shared array sa.
get_sem [Netmcore]
gets the semaphore with this ID (or raises No_resource).
get_sender_of_last_response [Rpc_client]
Return the address of the sender of the last received response.
get_server [Rpc_server]
Returns the server instance of the session
get_server [Nethttp.Header]
Returns the Server header as uninterpreted string (including comments).
get_set_cookie [Nethttp.Header]
Get the Set-Cookie header
get_shm [Netmcore]
Gets the shm object with this ID (or raises No_resource).
get_size [Ftp_client]
get_socket_name [Rpc_server]
get_socket_name [Rpc_client]
get_srv_event_system [Rpc_server]
Returns the event system
get_subprocess_status [Netsys_posix]
If the subprocess is terminated, this function returns the status.
get_te [Nethttp.Header]
Returns the TE header as list of triples (te_token, te_params, accept_params).
get_to_unicode [Netmappings]
get_token [Mimestring]
Return the s_token within the s_extended_token
get_trailer [Nethttp.Header]
Returns the Trailer header as list of field names.
get_transfer_encoding [Nethttp.Header]
Returns the Transfer-encoding header as list of pairs (token, params).
get_type [Ftp_client]
get_unique [Ftp_client]
get_unix_gid [Ftp_client]
get_unix_mode [Ftp_client]
get_unix_uid [Ftp_client]
get_upgrade [Nethttp.Header]
Returns the Upgrade header as list of products.
get_user [Rpc_server]
Returns the user name as returned by the authentication method.
get_user_agent [Nethttp.Header]
Returns the User-agent header as uninterpreted string (including comments).
get_value [Netplex_sharedvar]
get_value name: Gets the value of the variable name.
get_vary [Nethttp.Header]
Returns the Vary header.
get_www_authenticate [Nethttp.Header]
Returns the WWW-Authenticate header as list of challenges (auth_scheme,auth_params).
get_xid [Rpc_server]
Returns the session ID.
get_xid_of_last_call [Rpc_client]
Returns the session identifier used in the just made call
getpagesize [Netsys_mem]
Returns the size of a page as reported by sysconf.
getpeername [Netsys]
like Unix.getpeername, but errors are fixed up.
getpgid [Netsys_posix]
Return the process group ID of the process with the passed PID.
getpgrp [Netsys_posix]
Same as getpgid 0, i.e.
getport [Rpc_portmapper]
getport pm_client program_nr version_nr protocol: finds out the port where the given service runs.
getsid [Netsys_posix]
Returns the session ID of the process with the passed PID.
getvalue [Netmcore_sem]
Returns the value of the semaphore
glob [Netglob]
Forms a set of filenames as described below, and matches this set against the pattern.
global_rcache [Rpc_proxy.ReliabilityCache]
The global cache.
global_rcache_config [Rpc_proxy.ReliabilityCache]
Returns the global config: policy = `None, disable_timeout_min = 1.0, disable_timeout_max = 64.0, threshold = 1, availability = fun _ _ -> true
global_replace [Netstring_pcre]
Returns the position where the substring matching the nth group ends
global_replace [Netstring_str]
global_replace re templ s: Replaces all matchings of re in s by templ.
global_substitute [Netstring_pcre]
replace_first re templ s: Replaces the first match of re in s by templ.
global_substitute [Netstring_str]
global_substitute re subst s: Applies the substitution function subst to all matchings of re in s, and returns the transformed string.
grab [Netsys_mem]
grab addr len: Interprets the address range from addr to addr+len-1 as memory bigarray.
grantpt [Netsys_posix]
Grant access to this PTY
gread [Netsys]
gread fd_style fd s pos len: Reads up to len bytes from descriptor fd which is supposed to support the I/O style fd_style, i.e.
group [Netshm]
Execute a sequence of operations in a group:
group_beginning [Netstring_pcre]
Extracts the substring the nth group matches from the whole string.
group_beginning [Netstring_str]
Returns the position where the substring matching the nth group begins
group_end [Netstring_pcre]
Returns the position where the substring matching the nth group begins
group_end [Netstring_str]
Returns the position where the substring matching the nth group ends
grow [Netmcore_array]
grow sa n x: Grows the array to n elements.
gshutdown [Netsys]
gshutdown fd_style fd cmd: If there is the possibility to shut down the connection for this kind of descriptor, the shutdown is tried.
gt_uint4 [Rtypes]
gt_uint4 [Netnumber]
gt_uint8 [Netnumber]
gwrite [Netsys]
gwrite fd_style fd s pos len: Writes up to len bytes to descriptor fd which is supposed to support the I/O style fd_style, i.e.

H
handle_request [Netcgi_fcgi]
handle_request config output_type arg_store eh f ~max_conns ~log fd: This is a lower-level interface that processes exactly one request arriving on the existing connection fd.
handle_request [Netcgi_scgi]
handle_request config output_type arg_store eh f ~log fd: This is a lower-level interface that processes exactly one request arriving on the existing connection fd.
handle_request [Netcgi_ajp]
handle_request config output_type arg_store eh f ~log fd: This is a lower-level interface that processes exactly one request arriving on the existing connection fd.
has_console [Netsys_win32]
True if there is a console
hashtbl_of_descr [Netmcore_hashtbl]
Look up the hash table for this descriptor
have_at [Netsys_posix]
Whether the *at functions are available (they were only recently standardized and cannot be expected on all OS yet)
have_event_aggregation [Netsys_posix]
Whether there is an implementation for this OS
have_fadvise [Netsys_posix]
Returns whether the OS supports the fadvise POSIX option
have_fallocate [Netsys_posix]
Returns whether the OS supports the fallocate POSIX option
have_ioprio [Netsys_posix]
Returns true if the system call ioprio_get is supported
have_poll [Netsys_posix]
Whether there is a native poll implementation on this OS
have_posix_semaphores [Netsys_posix]
Returns true if POSIX semaphores are supported on this system
have_posix_shm [Netsys_posix]
Returns whether the OS supports POSIX shared memory
have_posix_shm [Netsys]
have_posix_timer [Netsys_posix]
hdr_address [Netsys_mem]
These two functions return the address of the Obj.t and the address of the header of the Obj.t, respectively.
header [Netmcore_hashtbl]
Returns the header
header [Netmcore_matrix]
Returns the header
header [Netmcore_buffer]
Returns the header
header [Netmcore_queue]
Returns the header
header [Netmcore_array]
Returns the header
header_only [Netcgi_apache.Apache.Request]
request_rec header_only field.
headers_in [Netcgi_apache.Apache.Request]
request_rec headers_in field.
headers_out [Netcgi_apache.Apache.Request]
request_rec headers_out field.
heap [Netmcore_hashtbl]
Returns the heap backing this data structure
heap [Netmcore_matrix]
Return the backing heap structure
heap [Netmcore_buffer]
Returns the underlying heap
heap [Netmcore_queue]
Returns the underlying heap
heap [Netmcore_array]
Return the backing heap structure
heap [Netmcore_ref]
Returns the backing heap structure
heap_of_descr [Netmcore_heap]
heap_of_descr pool d: Get the heap for a descriptor.
hex_dump_m [Rpc_util]
hex_dump_s [Rpc_util]
Format the contents as hex sequence
hmac [Netauth]
The HMAC algorithm of RFC 2104.
host_distributor [Nethttpd_services]
Configures virtual hosting
host_is_enabled [Rpc_proxy.ReliabilityCache]
Returns whether the host is enabled
hostname [Netcgi_apache.Apache.Request]
request_rec hostname field -- hostname to which the request was made.
hostname [Netcgi_apache.Apache.Server]
server_hostname field (as declared in Apache configuration file).
html40_dtd [Nethtml]
The (transitional) HTML 4.0 DTD, expressed as simplified_dtd
http_cb_id [Http_client]
Identifies a channel binding to pure HTTP (without SSL), with or without web proxies
http_delete [Http_client.Convenience]
Does a "DELETE" request with the given URL and returns the response body.
http_delete_message [Http_client.Convenience]
Does a "DELETE" request with the given URL and returns the reply.
http_fs [Http_fs]
Same as normal function
http_get [Http_client.Convenience]
Does a "GET" request with the given URL and returns the message body
http_get_message [Http_client.Convenience]
Does a "GET" request with the given URL and returns the message
http_head_message [Http_client.Convenience]
Does a "HEAD" request with the given URL and returns the reply.
http_password [Http_client.Convenience]
The default password if authentication is required
http_post [Http_client.Convenience]
Does a "POST" request with the given URL and returns the response body.
http_post_message [Http_client.Convenience]
Does a "POST" request with the given URL and returns the reply.
http_put [Http_client.Convenience]
Does a "PUT" request with the given URL and returns the response body.
http_put_message [Http_client.Convenience]
Does a "PUT" request with the given URL and returns the reply.
http_status_of_int [Nethttp]
Returns the status value for an integer code, or raises Not_found
http_transport_channel_type [Http_client]
Transport via HTTP
http_trials [Http_client.Convenience]
number of times every request is tried.
http_user [Http_client.Convenience]
The default user if authentication is required
http_verbose [Http_client.Convenience]
Turns on debug messages on stderr.
https_cb_id [Http_client]
Identifies a channel binding to anonymous HTTPS (i.e.
https_transport_channel_type [Https_client]
Configures a TLS tunnel for this context

I
id [Rpc_program]
The ID identifies the program (used in Rpc_client)
idempotent_async_call [Rpc_proxy.ManagedSet]
idempotent_async_call mset async_call arg emit: Picks a new mclient and calls async_call mclient arg emit.
idempotent_sync_call [Rpc_proxy.ManagedSet]
Synchronized version.
ignore_subprocess [Netsys_posix]
Changes the arrangement so that the termination of the subprocess is no longer reported by the file descriptor.
in_buffer_blit [Uq_io]
Blit to a string or memory buffer
in_buffer_fill_e [Uq_io]
Requests that the buffer is filled more than currently, and transitions to `Done eof when there is more data, or the EOF is reached (eof=true).
in_buffer_length [Uq_io]
The length
inactivate [Uq_io]
Releases the OS resources immediately.
incr_rcache_error_counter [Rpc_proxy.ReliabilityCache]
Increase the error counter for this sockaddr.
increment [Netplex_semaphore]
Increment the named semaphore by 1, and return the new value.
index_from [Netpagebuffer]
index_from nb k c: Searches the character c in the buffer beginning at position k.
index_from [Netbuffer]
index_from nb k c: Searches the character c in the netbuffer beginning at position k.
inet_addr_of_protostring [Netsys]
Converts an IP address to the 4 bytes (IPv4) or 16 bytes (IPv6) representation in network byte order, and vice-versa
init [Netgzip]
By calling this function it is enforced that the (de)-compression algorithms are registered at Netcompression.
init [Netsys_signal]
Call this function to ensure that this module is initialized.
init [Netmcore_matrix]
init pool_id n1 n2 f h: Creates a matrix of the passed number of elements (n1 * n2), and for getting the element at position k the function f k is run, and the copy of the result is written to the position.
init [Netmcore_array]
init pool_id n f h: Creates a shared array of the passed number of elements, and for getting the element at position k the function f k is run, and the copy of the result is written to the position.
init_array [Netsys_mem]
let voffset, bytelen = init_array mem offset size: Initializes the memory at offset and following bytes as Ocaml array with size elements.
init_array_bytelen [Netsys_mem]
Returns bytelen if init_array was called with the passed size.
init_console_codepage [Netsys_win32]
Sets the code page of the console to the ANSI code page of the system.
init_float_array [Netsys_mem]
Same for arrays of floats
init_float_array_bytelen [Netsys_mem]
Same for arrays of floats
init_header [Netsys_mem]
init_header mem offset tag size: Initializes the word at mem+offset as an Ocaml value header with the given tag and the given size (in words).
init_string [Netsys_mem]
let voffset, bytelen = init_string mem offset len: Initializes the memory at offset and following bytes as Ocaml string with length len.
init_string_bytelen [Netsys_mem]
Returns bytelen if init_string was called with the passed len.
init_value [Netsys_mem]
let voffset, bytelen = init_value mem offset v flags: Initializes the memory at offset and following bytes as copy of the boxed value v.
initgroups [Netsys_posix]
See initgroups(3).
input_e [Uq_io]
let e = input_e d s pos len: Reads data from d and puts it into the string s starting at pos and with maximum length len.
input_line_e [Uq_io]
let e = input_line_e d: Reads the next line from d and transitions to `Done line when done.
input_lines_e [Uq_io]
let e = input_lines_e d: Reads as many lines from d as can be found in the buffer of d, and transitions to `Done lines.
input_stream_adapter [Shell_fs]
Arranges that the input of a shell command is made available as an out_obj_channel:
input_thread_event [Netsys_win32]
This event is signaled when there is data to read, or the EOF is reached, or there is an error condition
input_thread_proxy_descr [Netsys_win32]
Returns the proxy descriptor
input_thread_read [Netsys_win32]
input_thread_read t s pos len: Tries to read data from the buffer.
insert_char [Netbuffer]
insert_char nb p c: Inserts character c at position p into the netbuffer nb
insert_string [Netbuffer]
insert_string nb p s: Inserts the value of string s at position p into the netbuffer nb
insert_sub_string [Netbuffer]
insert_string nb p s k n: Inserts a substring of string s at position p into the netbuffer nb.
install_job_handlers [Shell_sys]
Installs handlers as configured before.
install_subprocess_handler [Netsys_posix]
Installs a SIGCHLD handler for watching subprocesses.
int32_array_manager [Netshm_data]
The identity representation manager
int32_manager [Netshm_data]
Represents an int32 as one-element int32_array
int32_of_int4 [Rtypes]
int32_of_int4 [Netnumber]
int32_of_int8 [Rtypes]
int32_of_int8 [Netnumber]
int32_of_uint4 [Rtypes]
int32_of_uint4 [Netnumber]
int32_of_uint8 [Rtypes]
int32_of_uint8 [Netnumber]
int4_as_string [Rtypes]
int4_as_string [Netnumber.ENCDEC]
int4_of_int [Rtypes]
int4_of_int [Netnumber]
int4_of_int32 [Rtypes]
int4_of_int32 [Netnumber]
int4_of_int64 [Rtypes]
int4_of_int64 [Netnumber]
int64_manager [Netshm_data]
Represents an int64 as two-element int32_array
int64_of_file_descr [Netsys]
Returns the file descriptor as int64 number.
int64_of_int4 [Rtypes]
int64_of_int4 [Netnumber]
int64_of_int8 [Rtypes]
int64_of_int8 [Netnumber]
int64_of_uint4 [Rtypes]
int64_of_uint4 [Netnumber]
int64_of_uint8 [Rtypes]
int64_of_uint8 [Netnumber]
int8_as_string [Rtypes]
int8_as_string [Netnumber.ENCDEC]
int8_of_int [Rtypes]
int8_of_int [Netnumber]
int8_of_int32 [Rtypes]
int8_of_int32 [Netnumber]
int8_of_int64 [Rtypes]
int8_of_int64 [Netnumber]
int_blit [Netaux.ArrayAux]
A specialisation of Array.blit for int arrays.
int_manager [Netshm_data]
Uses either int32_manager or int64_manager to represent int, depending on the size of int.
int_of_act_events [Netsys_posix]
int_of_file_descr [Netsys_posix]
Return the file descriptor as integer.
int_of_http_status [Nethttp]
Returns the integer code for a status value
int_of_int4 [Rtypes]
int_of_int4 [Netnumber]
int_of_int8 [Rtypes]
int_of_int8 [Netnumber]
int_of_req_events [Netsys_posix]
int_of_uint4 [Rtypes]
int_of_uint4 [Netnumber]
int_of_uint8 [Rtypes]
int_of_uint8 [Netnumber]
int_series [Netaux.ArrayAux]
int_series src srcpos dst dstpos len n: Computes for every i, 0 <= i < len: dst.(dstpos+i) = n + SUM(j=0..(i-1): src.(srcpos+j))
int_var [Netplex_cenv]
internal_redirect [Netcgi_apache.Apache.Request]
Internally redirects immediately to uri.
internal_redirect_handler [Netcgi_apache.Apache.Request]
Internally redirects immediately to uri using handler specified by r.
interrupt_event_aggregator [Netsys_posix]
If create_event_aggregator was called with true as argument, the aggregator is interruptible, and this function interrupts it.
invoke_method [Ftp_client]
This FTP method simply invokes command.
ioprio_get [Netsys_posix]
Retrieve the priority of the target.
ioprio_set [Netsys_posix]
Sets the priority of the target processes.
ip_url_syntax [Neturl]
Syntax for IP based protocols.
ipproto_tcp [Rpc_portmapper_aux]
ipproto_udp [Rpc_portmapper_aux]
is_MSIE [Netcgi_common]
is_MSIE user_agent tells whether the user_agent is Microsoft Internet Explorer.
is_absolute [Netsys]
Whether this file path is absolute.
is_ascii_compatible [Netconversion]
"ASCII compatible" means: The bytes 1 to 127 represent the ASCII codes 1 to 127, and no other representation of a character contains the bytes 1 to 127.
is_cgi [Netcgi_cgi]
is_cgi says whether the script is run in a CGI environment.
is_console [Netsys_win32]
Tests whether the descriptor is the input or the output stream of the console.
is_crt_fd [Netsys_win32]
Tests whether the descriptor has a certain CRT counterpart.
is_dummy [Rpc_server]
Whether this is a server in `Dummy mode.
is_empty [Netmcore_queue]
Tests whether the queue is empty
is_executable [Shell_sys]
Returns true if there is an executable file for the command, and it is permitted to run this file (as stated by the file permissions).
is_ipv4_inet_addr [Netsys]
Whether the address is an IPv4 address
is_ipv6_inet_addr [Netsys]
Whether the address is an IPv6 address
is_multicast_inet_addr [Netsys]
Whether the address is a multicast address (either IPv4 or IPv6)
is_prefix [Netcgi_common]
is_prefix pre s checks whether pre is a prefix of s.
is_prird [Netsys]
Test whether the descriptor would not block if one of the input, output, or priority input operations were done.
is_readable [Netsys]
is_running [Unixqueue]
Whether the event loop is running
is_running [Equeue]
Returns whether the event loop is active
is_single_byte [Netconversion]
Returns whether the encoding is a single-byte encoding
is_stderr [Netsys]
Returns whether the descriptors are stdin/stdout/stderr
is_stdin [Netsys]
is_stdout [Netsys]
is_up [Rpc_client]
Return whether the client is up
is_virtual [Netcgi_apache.Apache.Server]
is_virtual field.
is_writable [Netsys]
iter [Netfs]
iter pre fs start: Iterates over the file hierarchy at start.
iter [Netshm_hashtbl]
iter f tbl applies f to all bindings in table tbl.
iter [Netshm]
iter f tbl applies f to all bindings in table tbl.
iter [Netmcore_hashtbl]
Hashtbl.iter f tbl applies f to all bindings in table tbl.
iter [Netmcore_queue]
iter f q: Iterates over the elements of the queue and calls f x for each element x.
iter_env [Shell_sys]
Iterates over the strings of the environment, and calls f s for every string s.
iter_env_vars [Shell_sys]
Iterates over the variables of the environment, and calls f name value for every variable with name and value.
iter_keys [Netshm_hashtbl]
iter_keys f tbl applies f to all keys in table tbl.
iter_keys [Netshm]
iter_keys f tbl applies f to all keys in table tbl.
iter_lines [Mimestring]
iter_lines f s pos len: Splits the substring of s from pos to pos+len into lines, and calls f line for each line.

J
job_status [Shell_sys]
Returns the status.
join [Netmcore_process]
let r_opt = join jp pid: Waits until the process pid finishes, and uses the join point jp to extract the result.
join [Netmcore]
let res_opt = join join_point pid: Waits until the process pid is done, and returns the result value if any.
join_path [Neturl]
Concatenates the path components (reverse function of split_path).

K
keep_away_from [Netsys_signal]
keep_away_from signo: This signal signo is added to the "keep away list".
keep_away_list [Netsys_signal]
Returns the "keep away list".
key [Http_client]
Create a key object
keyserv_connector [Rpc_xti_client]
Returns a connector that can be used to call the keyserv daemon.
kill [Shell_sys]
Sends a signal to the passed process.
kill_all_subprocesses [Netsys_posix]
kill_all_subprocess signal override nogroup: Sends a signal to potentially all subprocesses.
kill_process_group [Shell_sys]
Kills the process group if it is still (at least partially) running.
kill_processes [Shell_sys]
Kills the individual processes of the job which are still running.
kill_subprocess [Netsys_posix]
Sends this signal to the subprocess if this process still exists.
killpg_all_subprocesses [Netsys_posix]
killpg_all_subprocess signal override: Sends a signal to potentially all subprocesses belonging to a process group (i.e.
killpg_subprocess [Netsys_posix]
Sends this signal to the process group of the subprocess if there is still a watched subprocess belonging to this group.

L
last_chars [Netstring_pcre]
Same as string_before
last_chars [Netstring_str]
Same as string_after
le_uint4 [Rtypes]
le_uint4 [Netnumber]
le_uint8 [Netnumber]
left_pair_manager [Netshm_data]
Uses the same representation as pair_manager, but the resulting data manager only reads the left value of the pair.
length [Netpagebuffer]
The length
length [Netbuffer]
Returns the logical length of the buffer
length [Netshm_array]
Returns the length of the array
length [Netshm_hashtbl]
length tbl returns the number of bindings in tbl.
length [Netshm]
length tbl returns the number of bindings in tbl.
length [Netmcore_hashtbl]
Hashtbl.length tbl returns the number of bindings in tbl.
length [Netmcore_buffer]
Returns the length
length [Netmcore_queue]
Returns the number of elements in the queue (O(1))
length [Netmcore_array]
Returns the length
length_mstrings [Xdr_mstring]
returns the sum of the lengths of the mstrings
length_of_packed_value [Rpc_packer]
level_names [Netlog]
The level names indexed by weight
level_of_string [Netlog]
level_of_string [Netplex_log]
Convert a string to a level
level_weight [Netlog]
A number correspondig to the level
level_weight [Netplex_log]
An integer corresponding to the level
lexbuf_of_in_obj_channel [Netchannels]
Creates a lexical buffer from an input channel.
lexeme [Netulex.Ulexing]
Returns the lexeme as array of Unicode code points
lexeme_char [Netulex.Ulexing]
Returns the code point of a certain character of the lexeme
lexeme_end [Netulex.Ulexing]
The character position of the end of the lexeme
lexeme_length [Netulex.Ulexing]
The length of the lexeme in characters
lexeme_start [Netulex.Ulexing]
The character position of the start of the lexeme
lift_in [Netchannels]
Turns a rec_in_channel or raw_in_channel, depending on the passed variant, into a full in_obj_channel object.
lift_out [Netchannels]
Turns a rec_out_channel or raw_out_channel, depending on the passed variant, into a full out_obj_channel object.
linear_distributor [Nethttpd_services]
Configures linear distribution
lines_of_in_obj_channel [Netchannels]
Reads from the input channel until EOF and returns the lines as string list.
linkat [Netsys_posix]
linkat olddirfd oldpath newdirfd newpath flags
list [Netsys_signal]
Returns the list of signal handlers
list_header [Mimestring]
list_header s pos len: Returns the headers as list of pairs (name,value).
list_method [Ftp_client]
Lists the contents of the directory dir using the LIST command.
listener [Uq_engines]
This engine creates a server socket listening on the listen_address.
literal_glob_expr [Netglob]
Returns an expression that matches literally the passed string
local_fs [Netfs]
local_fs(): Returns a filesystem object for the local filesystem.
local_fsys [Netglob]
Accesses the local filesystem
local_interpreter [Shell_fs]
Executes commands on the local machine
local_path_of_file_url [Neturl]
Extracts the path from an absolute file URL, and returns a correct path name.
local_user_info [Netglob]
Get the home directory of a user from the local user database.
localzone [Netdate]
The offset in minutes for the local time zone from the UTC.
lock [Netmappings]
lock [Netplex_mutex]
Wait until the mutex is free, and locks it
lock [Netmcore_mutex]
Locks the mutex
log [Netlog.Debug]
Writes a log message
log [Netlog]
Writes a log message
log [Netplex_cenv]
Writes a log message
logand_inet_addr [Netsys]
Returns the bitwise AND of the two argument addresses
logf [Netlog.Debug]
Writes a log message like printf
logf [Netlog]
Writes a log message like printf
logf [Netplex_cenv]
Writes a log message like printf
logger_factories [Netplex_log]
All built-in logger factories
logical_int32_of_uint4 [Rtypes]
logical_int32_of_uint4 [Netnumber]
logical_int64_of_uint8 [Rtypes]
logical_int64_of_uint8 [Netnumber]
logical_uint4_of_int32 [Rtypes]
logical_uint4_of_int32 [Netnumber]
logical_uint8_of_int64 [Rtypes]
logical_uint8_of_int64 [Netnumber]
login_method [Ftp_client]
This FTP method logs the user in.
lognot_inet_addr [Netsys]
Returns the bitwise NOT of the argument address
logor_inet_addr [Netsys]
Returns the bitwise OR of the two argument addresses
logxor_inet_addr [Netsys]
Returns the bitwise XOR of the two argument addresses
lookup [Netsys_win32]
Returns the real object behind a proxy descriptor, or raises Not_found.
lookup [Netplex_cenv]
lookup service_name protocol_name tries to find a Unix domain socket for the service and returns it.
lookup_camlbox_address [Netmcore_camlbox]
Returns the address of the camlbox identified by this resource ID
lookup_camlbox_sender [Netmcore_camlbox]
lookup_camlbox_sender res_id: Returns the sender object of the camlbox identified by this resource ID
lookup_container_sockets [Netplex_cenv]
lookup_container_sockets service_name protocol_name: returns the Unix Domain paths of all container sockets for this service and protocol.
lookup_decoder [Netcompression]
Returns the decoder, or raises Not_found
lookup_encoder [Netcompression]
Returns the encoder, or raises Not_found
lookup_event [Netsys_win32]
lookup_executable [Shell_sys]
Searches an executable file.
lookup_input_thread [Netsys_win32]
lookup_output_thread [Netsys_win32]
Returns the real object.
lookup_pipe [Netsys_win32]
lookup_pipe_server [Netsys_win32]
lookup_process [Netsys_win32]
loop [Uq_libevent.LIBOEVENT]
lt_uint4 [Rtypes]
lt_uint4 is true iff the first value is less than the second value as unsigned int
lt_uint4 [Netnumber]
lt_uint4 is true iff the first value is less than the second value as unsigned int
lt_uint8 [Netnumber]
lt_uint8 is true iff the first value is less than the second value as unsigned int

M
m [Netmech_scram.AES_CTS]
main [Netcgi_apache.Apache.Request]
request_rec main field.
make [Nethttp.Cookie]
make ?expires ?domain ?path ?secure name value creates a new cookie with name name holding value.
make [Netmcore_matrix]
make pool_id n1 n2 x h: Creates a matrix of the passed number of elements (n1 * n2), copies the element x, and initializes each element of the new array with the single copy of x.
make [Netmcore_array]
make pool_id n x h: Creates a shared array of the passed number of elements, copies the element x, and initializes each element of the new array with the single copy of x.
make [Netcgi.Cookie]
make ?expires ?domain ?path ?secure name value creates a new cookie with name name holding value.
make [Netcgi_common.Cookie]
make_pattern [Netaux.KMP]
make_temporary_file [Netchannels]
Creates a temporary file in the directory tmp_directory with a name prefix tmp_prefix and a unique suffix.
make_url [Neturl]
Creates a URL from components:
make_var_type [Netplex_cenv]
Create get and set functions for any (monomorphic) type.
makechar [Netconversion]
makechar enc i: Creates the string representing the Unicode code point i in encoding enc.
manage [Netshm_array]
Manages a shared memory object as an array, including the representation of arbitrary O'Caml values.
manage [Netshm_hashtbl]
Manages a shared memory object as a hash table like Netshm.manage, and additionally represent arbitrary O'Caml values.
manage [Netshm]
Starts managing an open shared memory object as shm_table.
manage_file [Netmcore]
hands over a file to the manager
manage_sem [Netmcore]
hands over a named semaphore to the manager
manage_shm [Netmcore]
hands over a named shm object to the manager
map_engine [Uq_engines]
Same as function
map_list [Nethtml]
map_list f doclst: Applies f to all attribute values and data strings (except the attributes of "?", "!", or "--" nodes).
map_xv_enum_fast [Xdr]
Works for both XV_enum and XV_enum_fast
map_xv_struct_fast [Xdr]
Works for both XV_struct and XV_struct_fast
map_xv_union_over_enum_fast [Xdr]
Works for both XV_union_over_enum and XV_union_over_enum_fast.
match_beginning [Netstring_pcre]
Extracts the matched part from the string.
match_beginning [Netstring_str]
Returns the position where the matched part begins
match_end [Netstring_pcre]
Returns the position where the matched part begins
match_end [Netstring_str]
Returns the position where the matched part ends
match_glob_expr [Netglob]
Matches the glob_expr against a string.
matched_group [Netstring_pcre]
Returns the position where the matched part ends
matched_group [Netstring_str]
Extracts the substring the nth group matches from the whole string.
matched_string [Netstring_pcre]
Searches a match of the string with the regexp, starting at the position and in backward direction.
matched_string [Netstring_str]
Extracts the matched part from the string.
max_age [Nethttp.Cookie]
The expiration time of the cookie, in seconds.
max_age [Netcgi.Cookie]
The expiration time of the cookie, in seconds.
max_age [Netcgi_common.Cookie]
The expiration time of the cookie, in seconds.
max_int4 [Netnumber]
max_int8 [Netnumber]
max_uint4 [Netnumber]
max_uint8 [Netnumber]
mcast_add_membership [Netsys]
Join a multicast group.
mcast_drop_membership [Netsys]
Leave a multicast group.
mcast_set_loop [Netsys]
Whether sent multicast messages are received by the sending host
mcast_set_ttl [Netsys]
Set TTL/hops value
mclient_serial [Rpc_proxy.ManagedClient]
Get the serial number of the connection.
mclient_state [Rpc_proxy.ManagedClient]
Get the state
mdtm_method [Ftp_client]
Determines the date and time of the last modification of file.
mem [Netshm_hashtbl]
mem tbl key checks if key is bound in tbl.
mem [Netshm]
mem tbl key checks if key is bound in tbl.
mem [Netmcore_hashtbl]
Safe version of mem_ro in the presence of parallel modifications.
mem_read [Netsys_mem]
A version of Unix.read that uses a memory buffer.
mem_recv [Netsys_mem]
mem_ro [Netmcore_hashtbl]
Hashtbl.mem tbl x checks if x is bound in tbl.
mem_send [Netsys_mem]
Versions of Unix.recv, and Unix.send using memory buffers.
mem_write [Netsys_mem]
A version of Unix.single_write that uses a memory buffer.
memory [Netshm]
memory_address [Netsys_mem]
Returns the start address of the buffer
memory_based_mstrings [Xdr_mstring]
Uses memory to represent mstrings.
memory_map_file [Netsys_mem]
memory_map_file fd shared size: Maps size bytes of the file fd into memory, and returns the memory buffer like Bigarray.Array1.map_file.
memory_of_bigarray [Netsys_mem]
memory_of_bigarray_1 [Netsys_mem]
memory_of_bigarray_2 [Netsys_mem]
memory_of_bigarray_3 [Netsys_mem]
These functions return an arbitrary bigarray as memory.
memory_pool_based_mstrings [Xdr_mstring]
Uses memory to represent mstrings.
memory_to_mstring [Xdr_mstring]
Represent memory as mstring (no copy)
memory_unmap_file [Netsys_mem]
Unmaps the file.
meta_engine [Uq_engines]
Same as function
method_distributor [Nethttpd_services]
Configures method distribution
method_name [Netcgi_apache.Apache.Request]
request_rec method field.
method_number [Netcgi_apache.Apache.Request]
request_rec method_number field (given symbolically instead of a number).
mime [Netcgi.Argument]
mime_arg ?name msg creates a MIME-structured CGI argument called name with contents msg.
min_int4 [Netnumber]
min_int8 [Netnumber]
min_uint4 [Netnumber]
min_uint8 [Netnumber]
minimum_size [Netmcore_heap]
Returns the size value one must pass to create_heap at minimum to put this root element onto the heap.
mk_date [Netdate]
Format the seconds (plus nanos if present) as a string
mk_dlog [Netlog.Debug]
let dlog = mk_dlog "M" enable: The conditional debug function
mk_dlogr [Netlog.Debug]
let dlogr = mk_dlog "M" enable: The conditional debug function
mk_fp4 [Rtypes]
mk_fp4 [Netnumber]
mk_fp8 [Rtypes]
mk_fp8 [Netnumber]
mk_int4 [Rtypes]
mk_int4 [Netnumber]
mk_int8 [Rtypes]
mk_int8 [Netnumber]
mk_internet_date [Netdate]
Convert the time (seconds since the epoch) to a date string that conforms to RFC 3339.
mk_mail_date [Netdate]
Convert the time (seconds since the epoch) to a date string that conforms to RFC 1123 (which updates RFC 822).
mk_param [Mimestring]
Creates a parameter from a value (in decoded form).
mk_uint4 [Rtypes]
mk_uint4 [Netnumber]
mk_uint8 [Rtypes]
mk_<t> create integer values from character tuples.
mk_uint8 [Netnumber]
mk_<t> create integer values from character tuples.
mk_url_encoded_parameters [Netencoding.Url]
The argument is a list of (name,value) pairs.
mk_usenet_date [Netdate]
Convert the time (seconds since the epoch) to a date string that conforms to RFC 1036 (which obsoletes RFC 850).
mkdir_method [Ftp_client]
Creates the named directory
mkdirat [Netsys_posix]
Same as Unix.mkdir but the file is taken relative to the directory given by first argument
mkfifoat [Netsys_posix]
mkfifoat dirfd path mode
mknod [Netsys_posix]
Creates the node with the given permissions and the given type
mlsd_method [Ftp_client]
Gets the entries for this directory.
mlst_method [Ftp_client]
Get the file entry for file.
modify [Netplex_main]
Modifies the command-line configuration object
modify [Netmcore_heap]
modify h mutate: This function locks the heap so that this process has exclusive write access to it for the duration of the mutate function.
modify_close_on_exec [Netsys_win32]
Sets the close-on-exec flag, i.e.
modify_fd_event_source [Netsys_posix]
Modifies the set of events monitored at this event source
modify_url [Neturl]
Modifies the passed components and returns the modified URL.
moncontrol [Netsys]
Interface to the moncontrol routine of the GPROF profiler.
monitor_async [Uq_mt]
let result = monitor_async f arg: For calling RPC-style asynchronous clients.
monitor_do [Uq_mt]
let result = monitor_do mon f arg: Just runs f arg in the scope of the monitor, and returns the result.
monitor_run [Uq_mt]
let result = monitor_run mon f outer_esys arg: Runs another engine within the monitor.
move [Netconversion]
Moves the cursor one character to the right, or if num is passed, this number of characters to the right.
mp [Netplex_mp]
Uses Unix.fork to create new threads.
mset_load [Rpc_proxy.ManagedSet]
Returns the number of pending calls per service
mset_pick [Rpc_proxy.ManagedSet]
Pick an mclient for another call, or raise Cluster_service_unavailable.
mset_services [Rpc_proxy.ManagedSet]
Returns the service array
mstrings_of_packed_value [Rpc_packer]
msync_engine [Uq_engines]
Same as function
mt [Netplex_mt]
Uses Thread.create to create new threads
multi_file_logger [Netplex_log]
multi_file_logger_factory [Netplex_log]
Reads a logging section like

N
n_fold [Netauth]
Blumenthal's n-fold algorithm for an n that is divisible by 8.
name [Nethttp.Cookie]
The name of the cookie.
name [Netcgi.Cookie]
The name of the cookie.
name [Netcgi_common.Cookie]
name_of_shm [Netshm]
Returns the name of an object
names [Netlog.Debug]
Return the possible module names for enable_module and disable_module
nanosleep [Netsys_posix]
nanosleep t t_rem: Sleeps for t seconds.
nativeint_manager [Netshm_data]
Uses either int32_manager or int64_manager to represent nativeint, depending on the size of nativeint.
net_get [Rpc_key_service]
nethttpd_factory [Nethttpd_plex]
Factory for a web server component.
nethttpd_processor [Nethttpd_plex]
netplex_processor mk_config http_service: Creates a Netplex processor for Nethttpd.
new_cb_id [Http_client]
Allocates and returns a new ID
new_group [Unixqueue]
Create a new, empty group for the event system
new_job [Shell_sys]
Creates a new job descriptor.
new_serial [Netlog.Debug]
Create new serial number
new_wait_id [Unixqueue]
Create a new unique wait identifier
next [Netcgi_apache.Apache.Request]
request_rec next field.
nlst_method [Ftp_client]
Lists the contents of the directory dir using the NLST command The representation must not be `Image.
norm_path [Neturl]
Removes "." and ".." from the path if possible.
note_auth_failure [Netcgi_apache.Apache.Request]
Set headers to tell browser that authentication failed.
note_basic_auth_failure [Netcgi_apache.Apache.Request]
Set headers to tell browser that basic authentication failed.
note_digest_auth_failure [Netcgi_apache.Apache.Request]
Set headers to tell browser that digest authentication failed.
notes [Netcgi_apache.Apache.Request]
request_rec notes field.
nt_anonymous [Netgssapi]
anonymous name
nt_export_name [Netgssapi]
an export name
nt_hostbased_service [Netgssapi]
names like "service
nt_machine_uid_name [Netgssapi]
user ID in host byte order
nt_string_uid_name [Netgssapi]
user ID as string of digits
nt_user_name [Netgssapi]
names like "username"
nth [Netbuffer]
Alias for get
null [Rpc_portmapper]
Calls the 'NULL' procedure of the portmapper.
null_dlogger [Netlog.Debug]
The "logger" not printing anything
null_proc_name [Rpc_program]
Returns the name of procedure 0 (or None if not found)
null_url [Neturl]
A URL without any component and null_url_syntax
null_url_syntax [Neturl]
An URL syntax that recognizes nothing.

O
obj_address [Netsys_mem]
of_compat_activation [Netcgi1_compat.Netcgi_types]
Portage: of_compat_activation converts an old style cgi_activation to a new CGI-like object.
of_compat_argument [Netcgi1_compat.Netcgi_types]
Portage: of_compat_argument a converts an old style argument a to a new style one.
of_compat_config [Netcgi1_compat.Netcgi_env]
Portage: of_compat_config c transform the old configuration c into one suitable for the new interface.
of_compat_environment [Netcgi1_compat.Netcgi_env]
Portage: of_compat_environment e converts the old environment e to the new interface.
of_netscape_cookie [Nethttp.Cookie]
Convert a Netscape cookie to the new representation
of_netscape_cookie [Netcgi.Cookie]
Convert a Netscape cookie to the new representation
of_record [Netcgi_common.Cookie]
Conversion from the deprecated style of cookie.
of_stream_fs [Netglob]
Use an arbitrary network filesystem for globbing
oid_to_der [Netgssapi]
oid_to_string [Netgssapi]
once [Unixqueue]
Arranges that the callback function is called once after the passed period of time (the float argument) has elapsed.
open_shm [Netshm]
Opens the shared memory object.
openat [Netsys_posix]
Same as Unix.openfile but open relative to the directory given by first argument
openlog [Netsys_posix]
openlog ident options facility: Opens a log stream.
option_manager [Netshm_data]
Creates a data manager from an input data manager for optional values
option_of_char [Telnet_client]
Converts a character representing an option to the internal option name.
options_service [Nethttpd_services]
This service responds to "OPTIONS *" requests, and nothing else
output [Netcgi_apache.Apache.Request]
output r s ofs len send s[ofs .. len-1] back to the client.
output_e [Uq_io]
let e = output_e d s pos len: Outputs data to d and takes it from the string s starting at pos and with maximum length len.
output_file_response [Nethttpd_types]
Outputs the contents of a file as response body, together with the given status and the header (optional).
output_memory_e [Uq_io]
let e = output_string_e d m: Outputs the bigarray m to d, and transitions to `Done() when done.
output_netbuffer_e [Uq_io]
let e = output_string_e d b: Outputs the contents of b to d, and transitions to `Done() when done.
output_static_response [Nethttpd_types]
Outputs the string argument as response body, together with the given status and the header (optional).
output_std_response [Nethttpd_types]
Outputs a "standard response" for the http_status.
output_stream_adapter [Shell_fs]
Arranges that the output of a shell command is made available as an in_obj_channel:
output_string_e [Uq_io]
let e = output_string_e d s: Outputs the string s to d, and transitions to `Done() when done.
output_thread_event [Netsys_win32]
This event is signaled when there is space in the buffer, or when there is an error condition
output_thread_proxy_descr [Netsys_win32]
Returns the proxy descriptor
output_thread_write [Netsys_win32]
output_thread_write t s pos len: Tries to write data to the buffer.

P
pack_accepting_reply [Rpc_packer]
pack_call [Rpc_packer]
pack_call_gssapi_header [Rpc_packer]
pack_rejecting_reply [Rpc_packer]
pack_successful_reply [Rpc_packer]
pack_successful_reply_raw [Rpc_packer]
pack_xdr_value [Xdr]
pack_xdr_value_as_mstrings [Xdr]
The concatanated mstrings are the packed representation
pack_xdr_value_as_string [Xdr]
rm: If true, four null bytes are prepended to the string for the record mark
packed_value_of_mstrings [Rpc_packer]
packed_value_of_string [Rpc_packer]
page_for_additions [Netpagebuffer]
let (m,pos,len) = page_for_additions b: Returns the last page in m, the first free byte on the page in pos, and the number of free bytes on the page in len.
page_for_consumption [Netpagebuffer]
let (m,pos,len) = page_for_consumption b: Returns the first page in m, the first used byte on the page in pos, and the number of used bytes on the page in len.
pagesize [Netsys_mem]
The best guess at the page size
pair_manager [Netshm_data]
Creates a compound manager for pairs from two input managers
paligned_memory_based_mstrings [Xdr_mstring]
Uses memory to represent mstrings.
param_charset [Mimestring]
param_language [Mimestring]
Return the decoded value of the parameter, the charset (uppercase), and the language.
param_tokens [Mimestring]
Formats a parameter list.
param_value [Mimestring]
params [Xdr]
return the X_param parameters contained in the type
parse [Nethtml]
Parses the HTML document from an object channel and returns it.
parse [Netdate]
Parse a string and return a date/time record.
parse [Netaddress]
Parse a list of addresses in string representation, and return them as list of mailboxes or groups.
parse_document [Nethtml]
Parses the HTML document from a lexbuf and returns it.
parse_epoch [Netdate]
Parse a string and return the time (integral seconds since the epoch)
parse_epoch_approx [Netdate]
Parse a string and return the time (approximate seconds since the epoch)
parse_epoch_timespec [Netdate]
Parse a string and return the time (seconds and nanos since the epoch)
parse_glob_expr [Netglob]
Parses the glob expression.
parse_hostbased_service [Netgssapi]
Returns (service,host) for "service
parse_mic_token_header [Netgssapi]
Returns the triple (sent_by_acceptor, acceptor_subkey, sequence_number) from the header of a MIC token that is passed to this function as string.
parse_mlsd_document [Ftp_client]
Returns the entries contained in the output of `MLSD
parse_nlst_document [Ftp_client]
Returns the filenames contained in the output of `NLST
parse_no_proxy [Http_client]
Parses the value of an environment variable like no_proxy.
parse_proxy_setting [Http_client]
Parses the value of an environment variable like http_proxy, i.e.
parse_url [Neturl]
Parses the string and returns the URL the string represents.
parse_user_name [Rpc_auth_sys]
Parses a user name as returned by Rpc_server.get_user in conjunction with the AUTH_SYS authentication and `Full formatting.
parse_wrap_token_header [Netgssapi]
let (sent_by_acceptor, sealed, acceptor_subkey, sequence_number) = parse_wrap_token_header token
partial_url_syntax [Neturl]
Transforms the syntax into another syntax where all required parts are changed into optional parts.
path [Nethttp.Cookie]
The path of the cookie, if set.
path [Netcgi.Cookie]
The path of the cookie, if set.
path [Netcgi_common.Cookie]
path_info [Netcgi_apache.Apache.Request]
request_rec path_info field.
peek_auth_error [Rpc_packer]
peek_xid [Rpc_packer]
pending_calls [Rpc_proxy.ManagedClient]
Returns the number of pending calls
performance_event_system [Unixqueue]
Same as function
performance_pollset [Netsys_pollset_generic]
Returns the best available pollset on this platform for high performance servers that have to deal with many different file descriptors.
pidfile [Netplex_main]
Returns the location of the PID file (if any)
pin [Netmcore_heap]
pin m x: Pins a shared value x so it cannot be deleted by the garbage collector.
ping [Netcgi_dbi.DBI_DRIVER]
pipe_accept [Netsys_win32]
Waits until the connect event is signaled (usually meaning that a new client connection is available), and returns the new pipe.
pipe_connect [Netsys_win32]
pipe_connect name mode: Creates a client pipe handle, and tries to connect to the pipe server name.
pipe_connect_event [Netsys_win32]
The event object signals when a new client connection is available
pipe_descr [Netsys_win32]
Returns the proxy descriptor for the pipe.
pipe_listen [Netsys_win32]
Creates the backlog queue with n prepared server endpoints.
pipe_mode [Netsys_win32]
pipe_name [Netsys_win32]
pipe_name [Netmcore_condition]
Returns the name of the pipe
pipe_pair [Netsys_win32]
Returns a pair of connected pipes (using automatically generated names).
pipe_rd_event [Netsys_win32]
pipe_read [Netsys_win32]
pipe_read p s pos len: Tries to read data from the pipe.
pipe_server_descr [Netsys_win32]
Returns the proxy descriptor for the pipe server.
pipe_server_mode [Netsys_win32]
Returns the pipe/server mode
pipe_server_name [Netsys_win32]
Returns the name of the pipe
pipe_shutdown [Netsys_win32]
Cancels all pending I/O operations and closes the pipe handle.
pipe_shutdown_server [Netsys_win32]
Closes the pipe server: All endpoints in the backlog queue are shutdown.
pipe_wait_connect [Netsys_win32]
Wait until a client connects to this server.
pipe_wait_rd [Netsys_win32]
pipe_wait_wr [Netsys_win32]
Wait until the pipe becomes readable or writable.
pipe_wr_event [Netsys_win32]
The event objects signaling that read and write operations are possible.
pipe_write [Netsys_win32]
pipe_write p s pos len: Tries to write data to the pipe.
plugin [Netplex_mutex]
To enable mutexes, call the controller's add_plugin method with this object as argument.
plugin [Netplex_sharedvar]
To enable shared variables, call the controller's add_plugin method with this object as argument.
plugin [Netplex_semaphore]
To enable semaphores, call the controller's add_plugin method with this object as argument.
pmap_port [Rpc_portmapper_aux]
pmapproc_callit [Rpc_portmapper_clnt.PMAP.V2]
pmapproc_callit [Rpc_portmapper_clnt.Make'PMAP.V2]
pmapproc_callit'async [Rpc_portmapper_clnt.PMAP.V2]
pmapproc_callit'async [Rpc_portmapper_clnt.Make'PMAP.V2]
pmapproc_dump [Rpc_portmapper_clnt.PMAP.V2]
pmapproc_dump [Rpc_portmapper_clnt.Make'PMAP.V2]
pmapproc_dump'async [Rpc_portmapper_clnt.PMAP.V2]
pmapproc_dump'async [Rpc_portmapper_clnt.Make'PMAP.V2]
pmapproc_getport [Rpc_portmapper_clnt.PMAP.V2]
pmapproc_getport [Rpc_portmapper_clnt.Make'PMAP.V2]
pmapproc_getport'async [Rpc_portmapper_clnt.PMAP.V2]
pmapproc_getport'async [Rpc_portmapper_clnt.Make'PMAP.V2]
pmapproc_null [Rpc_portmapper_clnt.PMAP.V2]
pmapproc_null [Rpc_portmapper_clnt.Make'PMAP.V2]
pmapproc_null'async [Rpc_portmapper_clnt.PMAP.V2]
pmapproc_null'async [Rpc_portmapper_clnt.Make'PMAP.V2]
pmapproc_set [Rpc_portmapper_clnt.PMAP.V2]
pmapproc_set [Rpc_portmapper_clnt.Make'PMAP.V2]
pmapproc_set'async [Rpc_portmapper_clnt.PMAP.V2]
pmapproc_set'async [Rpc_portmapper_clnt.Make'PMAP.V2]
pmapproc_unset [Rpc_portmapper_clnt.PMAP.V2]
pmapproc_unset [Rpc_portmapper_clnt.Make'PMAP.V2]
pmapproc_unset'async [Rpc_portmapper_clnt.PMAP.V2]
pmapproc_unset'async [Rpc_portmapper_clnt.Make'PMAP.V2]
poll [Netsys_posix]
poll a n tmo: Poll for the events of the cells 0 to n-1 of poll array a, and set the poll_act_events member of all cells.
poll_array_length [Netsys_posix]
Return the number of cells in the poll array
poll_based_pollset [Netsys_pollset_posix]
Returns a poll set whose implementation is based on the poll system call.
poll_err_result [Netsys_posix]
poll_event_sources [Netsys_posix]
poll_event_sources ea tmo: First, all modifications are pushed to the kernel, and polling is set up to get events.
poll_hup_result [Netsys_posix]
poll_null_events [Netsys_posix]
Create an empty set of poll_act_events, for initilization of poll cells.
poll_nval_result [Netsys_posix]
Look for the bit in poll_act_events and return the status
poll_pri_result [Netsys_posix]
poll_rd_result [Netsys_posix]
poll_req_events [Netsys_posix]
poll_req_events rd wr pri: Create a set of in events consisting of the bits rd, wr, and pri.
poll_req_triple [Netsys_posix]
Looks into a poll_req_events value, and returns the triple (rd,wr,pri).
poll_result [Netsys_posix]
Look whether there is any event in poll_out_events
poll_single [Netsys_posix]
poll_single fd rd wr pri tmo: Polls a single descriptor for the events given by rd, wr, and pri.
poll_wr_result [Netsys_posix]
pollset [Netsys_pollset_win32]
This is a pollset implementation that works for sockets, and, named pipes as provided by Netsys_win32 (add the descriptors returned by pipe_descr or pipe_server_descr to the pollset) The number of descriptors that can be added to the pollset has a quite low limit (usually 63 sockets or 31 pipes).
pollset_event_system [Unixqueue_pollset]
Implements a unixqueue on top of a pollset.
pool_alloc_memory [Netsys_mem]
let m = pool_alloc_memory p: Gets a memory block m from the pool p.
pool_alloc_memory2 [Netsys_mem]
let m, free = pool_alloc_memory2 p: Gets a memory block m from the pool p like pool_alloc_memory.
pool_block_size [Netsys_mem]
Returns the size of the memory blocks in bytes
pool_reclaim [Netsys_mem]
Reclaim as much memory as possible
pool_report [Netsys_mem]
Returns a report describing the memory allocation in the pool
pop_c [Netmcore_queue]
pop_c q: Takes the first element x from the queue, removes it there, and returns a copy of x in normal memory.
pop_p [Netmcore_queue]
pop_p q f: Takes the first element x from the queue, removes it there, and calls f x.
port [Netcgi_apache.Apache.Request]
Server port.
port_of_program [Rpc_portmapper]
port_of_program program host protocol: queries the portmapper running on host for the program registered for protocol.
ports [Nethttp.Cookie]
port c the ports to which the cookie may be returned or [] if not set.
ports [Netcgi.Cookie]
port c the ports to which the cookie may be returned or [] if not set.
ports [Netcgi_common.Cookie]
posix_openpt [Netsys_posix]
posix_openpt noctty: Opens an unused PTY master.
post [Netmcore_sem]
Increments the semaphore by one, and notifies one of the waiting processes.
postprocess_job [Shell]
Looks at the error codes of the job, and raises Subprocess_error when there is an error that cannot be ignored.
prefix_mstrings [Xdr_mstring]
prefix_mstrings l n: returns the first n chars of the concatenated mstrings l as single string
prefix_of_packed_value [Rpc_packer]
The first n bytes of the packed value
prev [Netcgi_apache.Apache.Request]
request_rec prev field.
print_buffer [Netbuffer]
For the toploop
print_char [Netcgi_apache.Apache.Request]
Send a character back to the client.
print_endline [Netcgi_apache.Apache.Request]
Send a string followed by CR LF back to the client.
print_float [Netcgi_apache.Apache.Request]
Send a floating-point number back to the client.
print_glob_expr [Netglob]
Prints the glob expression as string.
print_in_obj_stream [Netstream]
A top-loop printer for streams
print_int [Netcgi_apache.Apache.Request]
Send a decimal number back to the client.
print_newline [Netcgi_apache.Apache.Request]
Send a CR LF back to the client.
print_s_param [Mimestring]
Prints a parameter to the formatter (as toploop printer)
print_string [Netcgi_apache.Apache.Request]
Send a string back to the client.
print_url [Neturl]
Printer for the toploop.
prioritizer [Uq_engines]
Same as function
procedure_number [Rpc_program]
procedure_number p name returns only the procedure number of the procedure called name.
process_connection [Nethttpd_engine]
Sets up an engine that processes all requests using the service description.
process_connection [Nethttpd_reactor]
Processes all HTTP requests in turn arriving at the file descriptor, and calls the service provider for every request.
process_descr [Netsys_win32]
Returns the proxy descriptor of the process
process_group_id [Shell_sys]
Returns the Unix ID of the process group as number > 1.
process_group_leader [Shell_sys]
Returns the process group leader process.
process_id [Shell_sys]
Returns the process ID of the process
processes [Shell_sys]
Returns the processes that have actually been started for this job by run_job; note that the corresponding Unix process group may have additional processes (e.g.
profile [Netmech_scram]
Creates a profile
program [Rpc_client]
Returns the program the client represents.
program_PMAP'V2 [Rpc_portmapper_aux]
program_number [Rpc_program]
Return the program number
programs [Rpc_client]
Returns the list of all bound programs
props_of_file [Netcgi_ajp]
props_of_file fname parses the property file fname and returns it as an associative list.
proto_num [Netcgi_apache.Apache.Request]
request_rec proto_num field.
protocol [Netcgi_apache.Apache.Request]
request_rec protocol field.
protocol_of_string [Nethttp]
Parses the protocol string, e.g.
protostring_of_inet_addr [Netsys]
provider [Netsys_oothr]
Return the multi-threading provider
proxy_only_cb_id [Http_client]
Identifies a channel binding to web proxy connections.
ptrace_verbosity [Rpc_server.Debug]
How verbose the ptrace is.
ptrace_verbosity [Rpc_client.Debug]
How verbose the ptrace is.
ptsname [Netsys_posix]
Get the name of the slave PTY
push [Netmcore_queue]
push x q: Pushes a copy of x to the end of the queue q
push_event_updates [Netsys_posix]
Pushes all modifications of the sources to the kernel
put_method [Ftp_client]
This FTP method walks to the right directory and puts file to the server.
put_string [Netbuffer]
put_string nb pos s: Copies the string s to the position pos of netbuffer nb

Q
query_langinfo [Netsys_posix]
query_langinfo locale: Temporarily sets the passed locale and determines the language attributes.
quit_method [Ftp_client]
Quits and disconnects
quote [Netstring_pcre]
Parses a case-insensitive regexp
quote [Netstring_str]
Quotes a string such that it can be included in a regexp
quote_set [Netstring_str]
Returns a regexp (as string) that matches any of the characters in the argument.

R
rcache_config [Rpc_proxy.ReliabilityCache]
Return the config
read_blocks [Netshm]
find_blocks tbl key f: The values may be stored in several disk blocks.
read_config_file [Netplex_config]
Reads a filename and returns the representation object
read_dynamic_service_config [Nethttpd_plex]
read_dynamic_service_config handlers cfg addr uri_path: Reads the service configuration section of type "dynamic" from config file cfg at address addr.
read_file_service_config [Nethttpd_plex]
read_file_service_config cfg addr uri_path: Reads the service configuration section of type "file" from config file cfg at address addr.
read_fp4 [Rtypes]
read_fp4 [Netnumber.ENCDEC]
read_fp8 [Rtypes]
read_fp8 [Netnumber.ENCDEC]
read_header [Mimestring]
This function expects that the current position of the passed in_obj_stream is the first byte of the header.
read_int4 [Rtypes]
read_int4 [Netnumber.ENCDEC]
read_int4_unsafe [Rtypes]
read_int4_unsafe [Netnumber.ENCDEC]
read_int8 [Rtypes]
read_int8 [Netnumber.ENCDEC]
read_int8_unsafe [Rtypes]
read_int8_unsafe [Netnumber.ENCDEC]
read_media_types_file [Nethttpd_services]
Reads a text file with two columns where the left column is the media type and the right column the corresponding suffix.
read_mime_header [Netmime]
Decodes the MIME header that begins at the current position of the netstream, and returns the header as class basic_mime_header.
read_mime_message [Netmime]
Decodes the MIME message that begins at the current position of the passed netstream.
read_multipart_body [Mimestring]
This is the "next generation" multipart message parser.
read_netplex_config [Netplex_config]
Reads a Netplex configuration file:
read_uint4 [Rtypes]
read_uint4 [Netnumber.ENCDEC]
read_uint4_unsafe [Rtypes]
read_uint4_unsafe [Netnumber.ENCDEC]
read_uint8 [Rtypes]
read_<t> create integer values from the characters found at a certain position in the string.
read_uint8 [Netnumber.ENCDEC]
read_<t> create integer values from the characters found at a certain position in the string.
read_uint8_unsafe [Rtypes]
Same, but no index check
read_uint8_unsafe [Netnumber.ENCDEC]
Same, but no index check
readlinkat [Netsys_posix]
readlinkat dirfd path
real_select [Netsys_win32]
Up to Ocaml 3.10, this function is identical to Unix.select.
really_gread [Netsys]
really_read fd_style fd s pos len: Reads exactly len bytes from fd and stores them in s starting at pos.
really_gwrite [Netsys]
really_write fd_style fd s pos len: Writes exactly the len bytes from s to fd starting at pos.
really_input_e [Uq_io]
let e = input_e d s pos len: Reads data from d and puts it into the string s starting at pos and with length len.
really_output_e [Uq_io]
let e = really_output_e d s pos len: Outputs data to d and takes it from the string s starting at pos and with length len.
really_read [Netsys]
Same as really_gread `Read_write
really_write [Netsys]
Same as really_gwrite `Read_write
realpath [Netsys_posix]
Returns a pathname pointing to the same filesystem object so that the pathname does not include "." or ".." or symbolic links.
recode [Netconversion]
Converts the character sequence contained in the at most in_len bytes of in_buf starting at byte position in_pos, and writes the result into at most out_len bytes of out_buf starting at byte position out_pos.
recode_string [Netconversion]
Recodes a complete string from in_enc to out_enc, and returns it.
record_unavailability [Rpc_proxy.ManagedClient]
Increases the error counter in the reliability cache for this connection.
recover_glob_expr [Netglob]
Returns the explicit representation
refill [Netulex.ULB]
Tries to add characters to the unicode_lexbuf by calling the ulb_refill function.
regexp [Netstring_pcre]
The type of matching results
regexp [Netstring_str]
Parses a regexp
regexp_case_fold [Netstring_pcre]
Parses a regexp
regexp_case_fold [Netstring_str]
Parses a case-insensitive regexp
regexp_string [Netstring_pcre]
Quotes a string such that it can be included in a regexp
regexp_string [Netstring_str]
Returns a regexp that matches exactly the string
regexp_string_case_fold [Netstring_pcre]
Returns a regexp that matches exactly the string
regexp_string_case_fold [Netstring_str]
Returns a case-insensitive regexp that matches exactly the string
register [Netcompression]
Registers a compression algorithm.
register [Netplex_cenv.LEVER]
let reg_lever = register ctrl raw_lever: Registers raw_lever in the controller ctrl, so one can call reg_lever to activate it.
register [Netcgi_apache.Handler]
Modules may call register fn name to register one or more handler functions.
register_cleanup [Netcgi_apache.Apache.Request]
Register a cleanup function which is called when the current request cycle ends.
register_exclusive_handler [Netsys_signal]
An exclusive handler for a signal is the only handler for the signal.
register_handler [Netsys_signal]
This function registers a handler called name for signal number signal.
register_module [Netlog.Debug]
Registers the enable variable of the named module
register_post_fork_handler [Netsys_posix]
Registers a new post fork handler (MT-Safe)
register_printer [Netexn]
register e f: Register that the exception type of the sample exception e is to be printed by f.
register_subprocess_handler [Netsys_posix]
Uses the Netsys_signal framework to manage the installation of the SIGCHLD handler.
reinit_cursor [Netconversion]
Reuses an existing cursor for a new purpose.
relaxed_html40_dtd [Nethtml]
A relaxed version of the HTML 4.0 DTD that matches better common practice.
release [Netmcore]
Release the resource with this ID.
release_fd [Netlog.Debug]
Removes this descriptor from the descriptor table.
release_fork_point [Netmcore_process]
Releases a fork point so it is deleted from the internal resource table.
release_join_point [Netmcore_process]
Releases a join point so it is deleted from the internal resource table.
remote_host [Netcgi_apache.Apache.Connection]
conn_rec remote_host field.
remote_ip [Netcgi_apache.Apache.Connection]
conn_rec remote_ip field.
remote_time [Rpc_time]
Returns the time of the passed server in seconds since the epoch.
remove [Netshm_hashtbl]
remove tbl key removes the current binding of key in tbl, restoring the previous binding if it exists.
remove [Netshm]
remove tbl key removes the current binding of key in tbl, restoring the previous binding if it exists.
remove [Netmcore_hashtbl]
Hashtbl.remove tbl x removes the current binding of x in tbl, restoring the previous binding if it exists.
remove_from_url [Neturl]
Removes the true components from the URL, and returns the modified URL.
remove_post_fork_handler [Netsys_posix]
Removes a post fork handler from the registry (MT-Safe)
remove_resource [Unixqueue]
Removes the operation from the watch list of the group.
rename_method [Ftp_client]
Renames the file_from into file_to.
renameat [Netsys_posix]
renameat olddirfd oldpath newdirfd newpath
replace [Netshm_hashtbl]
replace tbl key value replaces the current binding of key in tbl by a binding of key to value.
replace [Netshm]
replace tbl key value replaces the current binding of key in tbl by a binding of key to value.
replace [Netmcore_hashtbl]
Hashtbl.replace tbl x y replaces the current binding of x in tbl by a binding of x to y.
replace_first [Netstring_pcre]
global_replace re templ s: Replaces all matchings of re in s by templ.
replace_first [Netstring_str]
replace_first re templ s: Replaces the first match of re in s by templ.
reply [Rpc_server]
Asynchronous procedures can reply their results with this function.
reply_error [Rpc_server]
Like reply, but an error condition is sent back to the caller.
report_connection_string [Netplex_cenv]
Output a log line for the netplex.connections admin message.
report_signal_as_event [Netsys_posix]
report_signal_as_event ev sig Installs a new signal handler for signal sig so that ev is signalled when a signal arrives.
repr_config_file [Netplex_config]
repr_config_file name tree: converts the tree to a full config_file object.
req_events_of_int [Netsys_posix]
request_time [Netcgi_apache.Apache.Request]
request_rec request_time field.
reset [Netsys_pollset_posix]
This module may keep some global state.
reset [Netbuffer]
Empty the buffer, deallocate the internal string, and replace it with a new string of length n that was allocated by Netbuffer.create n.
reset_event [Netsys_win32]
Set the object to "non-signaled" state
reset_rcache_error_counter [Rpc_proxy.ReliabilityCache]
Reset the error counter for this sockaddr.
resize [Netshm_array]
resize a n: Resizes the array to length n.
resp_100_continue [Nethttpd_kernel]
The predefined token for the "100 Continue" response
restart [Netsys]
restart f arg calls f arg, and restarts this call if the exception Unix_error(EINTR,_,_) is caught.
restart_tmo [Netsys]
restart_tmo f tmo calls f with a timeout argument tmo, and restarted the call if the exception Unix_error(EINTR,_,_) is caught.
restarting_poll [Netsys_posix]
A wrapper around poll that handles the EINTR condition
restarting_select [Netsys]
A wrapper around Unix.select that handles the EINTR condition.
restarting_sleep [Netsys]
Sleep for the passed time.
restore_management [Netsys_signal]
restore_management signo: Restores signal handling management for signo as defined by the handler list for this signal.
restrict_dynamic_service_config [Nethttpd_plex]
Restricts the subsections and paremeters in the service configuration section of type "dynamic" to the allowed ones.
restrict_file_service_config [Nethttpd_plex]
Restricts the subsections and paremeters in the service configuration section of type "file" to the allowed ones.
rev_mode [Netsys_win32]
Reverses the direction
rev_split [Netcgi_common]
split_rev is_delim s split s at each character is_delim and returns the list of substrings in reverse order.
rflush [Netcgi_apache.Apache.Request]
Flush any buffered data waiting to be written to the client.
rm_htspace [Netcgi_common]
rm_htspace is_space s low up returns the substring s.[low .. up - 1] stripped of possible heading and trailing spaces identified by the function is_space.
rmdir_method [Ftp_client]
Deletes the named directory
rollback [Netcgi_dbi.DBI_DRIVER]
root [Netmcore_heap]
Returns the root element
rotate_right [Netauth]
Rotate the (big-endian) bitstring to the right by n bits.
rpc_engine [Rpc_proxy.ManagedClient]
Call an RPC function in engine style:
rpc_factory [Rpc_netplex]
A factory for TCP-based RPC servers.
run [Shell_sys]
Executes the command concurrently with the current process.
run [Netcgi_test]
run [Netcgi_fcgi]
run f register the function f as a main function of the script.
run [Netcgi_cgi]
run f executes f cgi for each cgi request.
run [Netcgi_scgi]
run f executes f cgi for each SCGI request.
run [Netcgi_ajp]
run f executes f cgi for each AJP request.
run [Netcgi_apache]
run f register the function f as a main function of the script.
run [Unixqueue]
Starts the event loop.
run [Equeue]
Running a system means that, unless the queue is empty, the events at the time of the run invocation and all later added events are gone through.
run_in_container_context [Netplex_cenv]
run_in_container_context cont f: Arranges that f() is executed in the context of the container cont.
run_in_controller_context [Netplex_cenv]
run_in_controller_context ctrl f: Arranges that f() is executed in the context of the controller.
run_job [Shell_sys]
Invokes the commands of the job such that they run concurrently with the main process.
run_mtests [Netmech_scram.AES_CTS]
run_post_fork_handlers [Netsys_posix]
Runs all post fork handlers.
run_tests [Netmech_scram.AES_CTS]

S
s_read_int4_64_unsafe [Netsys_xdr]
For 64 bit platforms only: Decodes 4 bytes at this string position as a signed 32 bit int in network byte order
s_read_string_array_unsafe [Netsys_xdr]
let pos' = s_read_string_array s pos len max a: Decodes the XDR repr of an array of strings without length field.
s_write_int4_64_unsafe [Netsys_xdr]
For 64 bit platforms only: Encodes 4 bytes at this string position as a signed 32 bit int in network byte order
salt_password [Netmech_scram]
let salted_password = salt_password password salt iteration_count
same_encoding [Netconversion]
Whether both encodings are the same.
sarray2_of_descr [Netmcore_matrix]
Look up the matrix for this descriptor
sarray_of_descr [Netmcore_array]
Look up the buffer for this descriptor
scan_encoded_text_value [Mimestring]
Scans a "text" value.
scan_header [Mimestring]
let params, header_end_pos = scan_header s start_pos end_pos:
scan_mime_type [Mimestring]
let name, params = scan_mime_type s options: Scans MIME types like text/plain; charset=iso-8859-1 The name of the type and the names of the parameters are converted to lower case.
scan_mime_type_ep [Mimestring]
let name, params = scan_mime_type_ep s options: This version copes with RFC-2231-encoded parameters.
scan_multipart_body [Mimestring]
let [params1, value1; params2, value2; ...] = scan_multipart_body s start_pos end_pos boundary:
scan_multipart_body_and_decode [Mimestring]
Same as scan_multipart_body, but decodes the bodies of the parts if they are encoded using the methods "base64" or "quoted printable".
scan_multipart_body_from_netstream [Mimestring]
scan_multipart_body_from_netstream s boundary create add stop:
scan_structured_value [Mimestring]
This function is included for backwards compatibility, and for all cases not requiring extended tokens.
scan_token [Mimestring]
Returns the next token, or End if there is no more token.
scan_token_list [Mimestring]
Returns all following tokens as a list (excluding End)
scan_value_with_parameters [Mimestring]
let name, params = scan_value_with_parameters s options: Scans values with annotations like name ; p1=v1 ; p2=v2 ; ... For example, MIME types like "text/plain;charset=ISO-8859-1" can be parsed.
scan_value_with_parameters_ep [Mimestring]
let name, params = scan_value_with_parameters_ep s options: This version of the scanner copes with encoded parameters according to RFC 2231.
scgi_processor [Netcgi_plex]
scram_mech [Netmech_scram_gssapi]
The OID of SCRAM
search_backward [Netstring_pcre]
Searches a match of the string with the regexp, starting at the position and in forward direction.
search_backward [Netstring_str]
Searches a match of the string with the regexp, starting at the position and in backward direction.
search_forward [Netstring_pcre]
Matches the string at the position with the regexp.
search_forward [Netstring_str]
Searches a match of the string with the regexp, starting at the position and in forward direction.
search_path [Netsys_win32]
search_path path_opt name ext_opt: Uses the SearchPath function to locate a file.
secure [Nethttp.Cookie]
Tells whether the cookie is secure.
secure [Netcgi.Cookie]
Tells whether the cookie is secure.
secure [Netcgi_common.Cookie]
Tells whether the cookie is secure.
select_based_event_system [Unixqueue_select]
Create a new Unix.select-based event system
select_emulation [Netsys_pollset_generic]
let select = select_emulation pset: Returns a function with the same meaning as Unix.select.
self_cont [Netplex_cenv]
Returns the container running the code of the caller, or raise Not_in_container_thread if called from outside a container context.
self_obj [Netplex_cenv]
Returns the container or the controller running the code of the caller, or raise Not_found if called from neither a container not a controller thread.
self_process_id [Netmcore]
Returns the process ID of a worker
sem_close [Netsys_posix]
Closes a named semaphore.
sem_create [Netsys_posix]
let (sem,name) = sem_create prefix init_value: Creates a new semaphore with a unique name.
sem_destroy [Netsys_posix]
Destroys the anonymous semaphore
sem_getvalue [Netsys_posix]
Returns the value of the semaphore.
sem_init [Netsys_posix]
sem_init mem pos pshared init_value: Initializes the memory at position pos to pos + sem_size() - 1 as anonymous semaphore.
sem_open [Netsys_posix]
sem_open name flags mode init_value: Opens a named semaphore which is optionally created.
sem_post [Netsys_posix]
Unlocks the semaphore (increases the value by 1)
sem_size [Netsys_posix]
The size of an anonymous semaphore in bytes (sizeof(sem_t))
sem_unlink [Netsys_posix]
Unlinks the semaphore name
sem_value_max [Netsys_posix]
The maximum value of a semaphore, but at most max_int
sem_wait [Netsys_posix]
Locks the semaphore (decreases the value by 1).
send_file_response [Nethttpd_kernel]
Sends the contents of a file as response body, together with the given status and the header (optional).
send_http_header [Netcgi_apache.Apache.Request]
Send the HTTP headers.
send_message [Netplex_cenv]
send_message service_pattern msg_name msg_arguments: Sends a message to all services and message receivers matching service_pattern.
send_static_response [Nethttpd_kernel]
Sends the string argument as response body, together with the given status and the header (optional).
sendmail [Netsendmail]
Sends the passed message.
separates_adjacent_encoded_words [Mimestring]
True iff the current token is white space (i.e.
seq_engine [Uq_engines]
Same as function.
serialize [Netsys_oothr]
serialize m f arg: Locks m, runs f arg, unlocks m, and returns the result.
serializer [Uq_engines]
Same as function
server [Netcgi_apache.Apache.Request]
request_rec server field.
server_auth_method [Rpc_auth_gssapi]
Creates an authentication method from a GSS-API interface.
server_auth_method [Rpc_auth_sys]
Pass the result of this function to Rpc_server.set_auth_methods to configure authentication.
server_auth_method [Rpc_auth_local]
Return the authentication method AUTH_LOCAL.
server_auth_method [Rpc_auth_dh]
Pass the result of this function to Rpc_server.set_auth_methods to configure AUTH_DH for an RPC server.
server_channel_binding [Netmech_scram]
Returns the channel binding requirement (the "c" parameter).
server_emit_flag [Netmech_scram]
Whether server_emit_message can now be called
server_emit_message [Netmech_scram]
Emits the next message to be sent to the client
server_error_flag [Netmech_scram]
Whether an error occurred, and the protocol cannot advance anymore
server_error_of_string [Netmech_scram]
Conversion
server_export [Netmech_scram]
server_finish_flag [Netmech_scram]
Whether the client is authenticated
server_import [Netmech_scram]
Exports a server session as string, and imports the string again.
server_protocol_key [Netmech_scram]
The 128-bit protocol key for encrypting messages.
server_recv_flag [Netmech_scram]
Whether server_recv_message can now be called
server_recv_message [Netmech_scram]
Receives the next message from the client
server_user_name [Netmech_scram]
The user name as transmitted from the client.
set [Rpc_portmapper]
set pm_client program_nr version_nr protocol port_nr: Extends the mapping managed by the portmapper: The triple (program_nr, version_nr, protocol) is mapped to the given port_nr.
set [Netbuffer]
set nb pos c: Sets the character at pos to c
set [Netshm_array]
set a k x: Sets the contents of the array element number k to x where 0 <= k < length a.
set [Netplex_cenv.VAR_TYPE]
set [Netmcore_matrix]
set sa k1 k2 x: Sets the (k1,k2)-th element of the matrix sa to a deep copy of x.
set [Netmcore_array]
set sa k x: Sets the k-th element of the array sa to a deep copy of x.
set [Netcgi.Argument]
set new_args args creates a list of argument from args deleting the arguments whose name appears in new_args and adding the new_args arguments.
set [Netcgi_common.Cookie]
set http_header cookies sets the cookies in http_header using version 0 or version 1 depending on whether version 1 fields are used.
set [Netcgi_apache.Apache.Table]
Table.set tbl key value sets the (key, value) pair in the table tbl.
set [Uq_libevent.LIBOEVENT]
set_accept [Nethttp.Header]
Sets the Accept header
set_accept_charset [Nethttp.Header]
Sets the Accept-charset header
set_accept_encoding [Nethttp.Header]
Sets the Accept-encoding header
set_accept_language [Nethttp.Header]
Sets the Accept-language header
set_accept_ranges [Nethttp.Header]
Sets the Accept-ranges header
set_age [Nethttp.Header]
Sets the Age header
set_allow [Nethttp.Header]
Sets the Allow header
set_args [Netcgi_apache.Apache.Request]
Set request_rec args field.
set_arguments [Shell_sys]
Sets the argument array
set_assignments [Shell_sys]
Sets the list of assignments (fd_from,fd_to)
set_auth_methods [Rpc_server]
Sets the available authentication methods.
set_auth_methods [Rpc_client]
Set the authentication methods for this client.
set_authorization [Nethttp.Header]
Sets the Authorization header.
set_batch_call [Rpc_proxy.ManagedClient]
The next call is a batch call.
set_batch_call [Rpc_client]
The next call will be a batch call.
set_bool_var [Netplex_cenv]
Set a variable with simple type
set_cache_control [Nethttp.Header]
Sets the Cache-control header
set_chdir [Shell_sys]
Sets the chdir parameter of the command
set_close_on_exec [Netsys]
set_cmdname [Shell_sys]
Sets the command name
set_color [Netsys_mem]
Set the GC color
set_comment [Nethttp.Cookie]
set_comment c s sets the comment of the cookie c to s which must be UTF-8 encoded (RFC 2279).
set_comment [Netcgi.Cookie]
set_comment c s sets the comment of the cookie c to s which must be UTF-8 encoded (RFC 2279).
set_comment [Netcgi_common.Cookie]
set_comment_url [Nethttp.Cookie]
set_comment_url c url same as Netcgi.Cookie.set_comment except that the cookie comment is available on the page pointed by url.
set_comment_url [Netcgi.Cookie]
set_comment_url c url same as Netcgi.Cookie.set_comment except that the cookie comment is available on the page pointed by url.
set_comment_url [Netcgi_common.Cookie]
set_connection [Nethttp.Header]
Sets the Connection header
set_console_attr [Netsys_win32]
Get/set console attributes.
set_console_mode [Netsys_win32]
Get/set the console mode.
set_content_encoding [Nethttp.Header]
Sets the Content-encoding header
set_content_language [Nethttp.Header]
Sets the Content-language header
set_content_length [Nethttp.Header]
Sets the Content-length header
set_content_location [Nethttp.Header]
Sets the Content-location header
set_content_md5 [Nethttp.Header]
Sets the Content-MD5 header
set_content_range [Nethttp.Header]
Sets the Content-range header
set_content_type [Nethttp.Header]
Sets the Content-type header
set_content_type [Netcgi_apache.Apache.Request]
Set request_rec content_type field.
set_cookie [Nethttp.Header]
Set the Cookie header.
set_current_resolver [Uq_resolver]
Set the pluggable resolver
set_date [Nethttp.Header]
Sets the Date header
set_debug_mode [Unixqueue.Debug]
Sets enable.
set_debug_mode [Equeue.Debug]
Sets enable.
set_debug_target [Unixqueue.Debug]
Restricts debugging to this target.
set_debug_target [Equeue.Debug]
Restricts debugging to this target.
set_descriptors [Shell_sys]
Sets the list of active descriptors
set_dgram_destination [Rpc_client]
set_dgram_destination client addr_opt: This function is required for using the client in conjunction with unconnected UDP sockets.
set_domain [Nethttp.Cookie]
Cookies are bound to a certain domain, i.e.
set_domain [Netcgi.Cookie]
Cookies are bound to a certain domain, i.e.
set_domain [Netcgi_common.Cookie]
set_enc_value [Netplex_sharedvar]
set_enc_value name value: Sets the variable name to value.
set_encoding [Netulex.ULB]
Sets the encoding to the passed value.
set_env [Shell_sys]
Sets the contents of the environment to the passed string array
set_env_var [Shell_sys]
set_env_var env varname varval: Sets the value of the variable varname in the environment env to varval.
set_environment [Shell_sys]
Sets the environment
set_etag [Nethttp.Header]
Sets the Etag header
set_event [Netsys_win32]
Set the object to "signaled" state
set_event [Netsys_posix]
Signals the event
set_exception_handler [Rpc_server]
Sets the exception handler for the server.
set_exception_handler [Rpc_client]
sets an exception handler (the default prints the exception with `Crit level to the logger set in Netlog).
set_expect [Nethttp.Header]
Sets the Expect header
set_expires [Nethttp.Header]
Sets the Expires header
set_filename [Shell_sys]
Sets the file name of the executable to start
set_filename [Netcgi_apache.Apache.Request]
Set request_rec filename field.
set_float_var [Netplex_cenv]
set_from [Nethttp.Header]
Sets the From header
set_global_rcache_config [Rpc_proxy.ReliabilityCache]
Sets the new global config.
set_host [Nethttp.Header]
Sets the Host header
set_if_match [Nethttp.Header]
Sets the If-match header
set_if_modified_since [Nethttp.Header]
Sets the If-modified-since header
set_if_none_match [Nethttp.Header]
Sets the If-none-match header
set_if_range [Nethttp.Header]
Sets the If-range header
set_if_unmodified_since [Nethttp.Header]
Sets the If-unmodified-since header
set_int_var [Netplex_cenv]
set_last_modified [Nethttp.Header]
Sets the Last-modified header
set_location [Nethttp.Header]
Sets the Location header
set_max_age [Nethttp.Cookie]
set_max_age c (Some t) sets the lifetime of the cookie c to t seconds.
set_max_age [Netcgi.Cookie]
set_max_age c (Some t) sets the lifetime of the cookie c to t seconds.
set_max_age [Netcgi_common.Cookie]
set_max_forwards [Nethttp.Header]
Sets the Max-forwards header
set_max_response_length [Rpc_client]
Sets the maximum length of responses.
set_mode_method [Ftp_client]
Requests a certain mode for future file transfers
set_mstring_factories [Rpc_server]
Sets the mstring factories to use for decoding requests containing managed strings
set_mstring_factories [Rpc_client]
Sets the mstring factory configuration that is used for decoding responses containing managed strings.
set_nonblock_event [Netsys_posix]
Sets the event fd to non-blocking mode
set_onclose_action [Rpc_server]
Every time a connection is closed, the onclose function is called with the closed connection.
set_path [Nethttp.Cookie]
Cookies are also bound to certain path prefixes, i.e.
set_path [Netcgi.Cookie]
Cookies are also bound to certain path prefixes, i.e.
set_path [Netcgi_common.Cookie]
set_path_info [Netcgi_apache.Apache.Request]
Set request_rec path_info field.
set_poll_cell [Netsys_posix]
set_poll_cell a k c: Sets the poll cell k to c.
set_ports [Nethttp.Cookie]
set ports c (Some p) says that the cookie c must only be returned if the server request comes from one of the listed ports.
set_ports [Netcgi.Cookie]
set ports c (Some p) says that the cookie c must only be returned if the server request comes from one of the listed ports.
set_ports [Netcgi_common.Cookie]
set_pragma [Nethttp.Header]
Sets the Pragma header
set_proxy_authenticate [Nethttp.Header]
Sets the Proxy-authenticate header
set_proxy_authorization [Nethttp.Header]
Sets the Proxy-authorization header The "Basic" authentication scheme is represented as explained for get_proxy_authorization.
set_range [Nethttp.Header]
Sets the Range header
set_referer [Nethttp.Header]
Sets the Referer header
set_referrer [Nethttp.Header]
Same, for addicts of correct orthography
set_retry_after [Nethttp.Header]
Sets the Retry-after header
set_rng [Netsys_rng]
Sets the globally used RNG
set_secure [Nethttp.Cookie]
Cookies are also bound to the type of the web server: set_secure false means servers without SSL, set_secure true means servers with activated SSL ("https").
set_secure [Netcgi.Cookie]
Cookies are also bound to the type of the web server: set_secure false means servers without SSL, set_secure true means servers with activated SSL ("https").
set_secure [Netcgi_common.Cookie]
set_server [Nethttp.Header]
Sets the Server header
set_session_filter [Rpc_server]
If set, the filter function is invoked every time the beginning of a new RPC call is received, and the result of the filter function determines what to do with the call:
set_session_filter_2 [Rpc_server]
Same as set_session_filter, but the filter gets as second argument the connection ID.
set_set_cookie [Nethttp.Header]
Set the Set-Cookie header
set_set_cookie_ct [Nethttp.Header]
Set the Set-Cookie and Set-Cookie2 headers:
set_status [Netcgi_apache.Apache.Request]
Set request_rec status field.
set_status_line [Netcgi_apache.Apache.Request]
Set request_rec status_line field.
set_string_var [Netplex_cenv]
set_structure_method [Ftp_client]
Requests a certain structure for future file transfers
set_te [Nethttp.Header]
Sets the TE header
set_timeout [Rpc_server]
Sets the timeout for the transport.
set_tmp_directory [Netsys_tmp]
Set the directory for temporary files
set_trailer [Nethttp.Header]
Sets the Trailer header
set_transfer_encoding [Nethttp.Header]
Sets the Transfer-encoding header
set_upgrade [Nethttp.Header]
Sets the Upgrade header
set_uri [Netcgi_apache.Apache.Request]
Set request_rec uri field.
set_user_agent [Nethttp.Header]
Sets the User-agent header
set_user_name [Rpc_client]
Sets the user name, or None (the default user name).
set_value [Nethttp.Cookie]
set_value c v sets the value of the cookie c to v.
set_value [Netplex_sharedvar]
set_value name value: Sets the variable name to value.
set_value [Netcgi.Cookie]
set_value c v sets the value of the cookie c to v.
set_value [Netcgi_common.Cookie]
set_vary [Nethttp.Header]
Sets the Vary header
set_www_authenticate [Nethttp.Header]
Sets the WWW-Authenticate header
setpgid [Netsys_posix]
setpgid pid pgid: Set the process group ID of the process pid to pgid.
setpgrp [Netsys_posix]
Same as setpgid 0 0: A new process group ID is created, and the current process becomes its sole member.
setregid [Netsys_posix]
Changes both the real and the effective group ID of the current process.
setreuid [Netsys_posix]
Changes both the real and the effective user ID of the current process.
setup_client_block [Netcgi_apache.Apache.Request]
Setup for reading client request.
setup_job [Shell]
Creates a job like call, but does not execute it.
shared_sub_mstring [Xdr_mstring]
shared_sub_mstring ms pos len: returns an mstring that includes a substring of ms, starting at pos, and with len bytes.
shared_sub_mstrings [Xdr_mstring]
Same for a list of mstrings
shell_fs [Shell_fs]
The shell filesystem.
shm_create [Netsys_posix]
let (fd,name) = shm_create prefix size: Creates an shm object with a unique name.
shm_name [Netmcore_mempool]
Returns the name of the shared memory object
shm_open [Netsys_posix]
Opens a shared memory object.
shm_open [Netsys]
shm_table [Netshm_array]
Returns the underlying shared memory table used to implement hash tables
shm_table [Netshm_hashtbl]
Returns the underlying shared memory table used to implement hash tables.
shm_type_of_name [Netshm]
shm_unlink [Netsys_posix]
Unlinks the name for a shared memory object
shm_unlink [Netsys]
should_client_block [Netcgi_apache.Apache.Request]
Returns true if there is any client request data.
shut_down [Rpc_proxy.ManagedSet]
shut_down [Rpc_proxy.ManagedClient]
shut_down [Rpc_portmapper]
Shuts down the connection to the portmapper.
shut_down [Rpc_simple_client]
Shut the connection down.
shut_down [Rpc_client]
Shuts down the connection.
shut_down [Rpc_key_service]
shutdown_connector [Rpc_client]
The default implementation to shut down the connector.
shutdown_e [Uq_io]
Performs a regular shutdown of the device.
signal [Netmcore_condition]
signal c restarts one of the processes waiting on the condition variable c.
signal_engine [Uq_engines]
let (se, signal) = signal_engine esys: Same as function
signature [Rpc_program]
simple [Netcgi.Argument]
simple_arg name value creates an unstructured CGI argument called name with contents value.
simple_listing [Nethttpd_services]
Simple listing generator for `Enable_listings
since_epoch [Netdate]
Convert a date/time record into the time (seconds since the epoch), rounded down to the next integral number.
since_epoch_approx [Netdate]
Same, but the nanos are added to the seconds.
since_epoch_timespec [Netdate]
Returns the seconds since the epoch as pair (seconds,nanos)
size_mem [Netmcore_mempool]
Returns the size of this block, or raises Not_found
size_mem_at_addr [Netmcore_mempool]
Returns the size of the block at this address, or raises Not_found
size_method [Ftp_client]
Determines the size of file.
skip_line_ends [Mimestring]
skip_line_ends s pos len: Skips over adjacent line ends (terminated by CR/LF or plain LF), and returns the position after the last line end.
skip_whitespace_left [Mimestring]
skip_whitespace_left s pos len: Returns the smallest p with p >= pos && p < pos+len so that s.[p] is not a whitesapce character (space, TAB, CR, LF), and s.[q] is a whitespace character for all q<p.
skip_whitespace_right [Mimestring]
skip_whitespace_right s pos len: Returns the biggest p with p >= pos && p < pos+len so that s.[p] is not a whitesapce character (space, TAB, CR, LF), and s.[q] is a whitespace character for all q>p.
sleep [Netsys]
small_block_size [Netsys_mem]
The block size of small_pool, normally 4K (or better, the page size)
small_pool [Netsys_mem]
Another standard pool where the blocks are smaller than in default_pool.
sockaddr_is_enabled [Rpc_proxy.ReliabilityCache]
Returns whether the sockaddr is enabled.
sockaddr_of_socksymbol [Uq_resolver]
Use the resolver to look up names in Netsockaddr.socksymbol, and convert the symbol to a Unix.sockaddr only containing IP addresses.
sockspec_of_sockaddr [Uq_engines]
Converts a normal socket address to the extended form
sockspec_of_socksymbol [Uq_engines]
Converts a Netsockaddr.socksymbol to this form
socksymbol_of_string [Netsockaddr]
Parses designations of the forms: <IPv4>:port, [<IPv4_or_IPv6]:port, <name>:port, /path, ./path Raises Failure on parse error.
spawn [Netsys_posix]
spawn cmd args: Fork the process and exec cmd which gets the arguments args.
specials_rfc2045 [Mimestring]
The sets of special characters defined by the RFCs 822 and 2045.
specials_rfc822 [Mimestring]
split [Netstring_pcre]
substitute_first re subst s: Applies the substitution function subst to the first matching of re in s, and returns the transformed string.
split [Netstring_str]
Splits the string according to the regexp in substrings.
split_delim [Netstring_pcre]
Splits into at most n substrings, based on split
split_delim [Netstring_str]
Same as split, but occurrences of the delimiter at the beginning and the end are returned as empty strings
split_glob_expr [Netglob]
Splits the glob expression into filename components separated by literal / characters.
split_host_port [Nethttp]
Splits the Host header in hostname and optional port number.
split_mime_type [Mimestring]
let (main_type, sub_type) = split_mime_type content_type: Splits the MIME type into main and sub type, for example split_mime_type "text/plain" = ("text", "plain") .
split_path [Neturl]
Splits a '/'-separated path into components (e.g.
split_uri [Mimestring]
Splits a long URI according to the algorithm of RFC 2017.
squeue_of_descr [Netmcore_queue]
Look up the queue for this descriptor
sref [Netmcore_ref]
The shared version of ref: Creates a mutable shared variable in the given memory pool
sref_of_descr [Netmcore_ref]
Look up the reference for this descriptor
ssh_interpreter [Shell_fs]
Executes commands via ssh on the machine host as user (defaults to current user).
ssl_accept_engine [Uq_ssl]
This engine performs the server handshake.
ssl_client_socket_config [Rpc_ssl]
SSL configuration object for clients
ssl_connect_engine [Uq_ssl]
This engine performs the client handshake.
ssl_server_socket_config [Rpc_ssl]
SSL configuration object for servers
standard_event_system [Unixqueue]
Create a new, empty, standard event system
standard_pollset [Netsys_pollset_generic]
Returns a good standard implementation of pollset for this platform.
start [Netmcore_process]
let pid = start fp arg: Starts a new process at the fork point fp with argument arg.
start [Netmcore_buffer]
Returns the start index
start [Netmcore]
let pid = start fork_point arg: Starts the process with the given fork_point and the argument arg.
startup [Netplex_main]
Establishes a configuration and starts the Netplex daemon.
startup [Netmcore]
This function makes the current process the master process.
stats [Netmcore_mempool]
Returns (total, free, contiguous) where total is the total size of the pool, free is the number of free bytes, contiguous is the size of the largest contiguous free block
status [Shell_sys]
Reports the status so far known: If the process has terminated, the status of the process is returned.
status [Netcgi_apache.Apache.Request]
request_rec status field.
status_line [Netcgi_apache.Apache.Request]
request_rec status_line field.
status_of_bad_request_error [Nethttpd_kernel]
Returns the best response code for the error
status_of_cgi_header [Nethttp]
Returns the status code and the status text corresponding to the Status header
std_access_log_string [Nethttpd_util]
Returns a log line for access logging
std_activation [Nethttpd_services]
Create the function for dyn_activation from a std_activation tag.
std_debug_access_log_string [Nethttpd_util]
Returns a log string for extended access logging (multi-line)
std_error_log_string [Nethttpd_util]
Returns a log line for error logging
std_error_response [Nethttpd_util]
Returns the HTML text of the standard error response
std_error_response [Nethttpd_plex]
A sample error response function
std_log_access [Nethttpd_plex]
Returns a function that logs accesses using the log_subch method of the passed container
std_log_error [Nethttpd_plex]
Returns a function that logs errors using the log_subch method of the passed container
stderr [Shell]
The standard descriptors; defined here for convenience.
stderr_logger_factory [Netplex_log]
Reads a logging section like
stdin [Shell]
stdout [Shell]
stop_connection [Rpc_server]
Schedules a special event that causes the connection to be stopped in the very near future.
stop_server [Rpc_server]
Stops the server: If a TCP server socket is listening, it is immediately closed.
storage [Netmime]
Creates a new storage facility for a mime body according to store.
stream_rpc_multiplex_controller [Rpc_transport]
The multiplex controller for stream encapsulation
stream_seq_engine [Uq_engines]
Same as function
string_after [Netstring_pcre]
The first n characters of a string
string_after [Netstring_str]
The last n characters of a string
string_based_mstrings [Xdr_mstring]
Uses strings to represent mstrings
string_before [Netstring_pcre]
Splits into at most n substrings, based on full_split
string_before [Netstring_str]
The first n characters of a string
string_manager [Netshm_data]
Represents a string in the following way.
string_match [Netstring_pcre]
Returns a case-insensitive regexp that matches exactly the string
string_match [Netstring_str]
Matches the string at the position with the regexp.
string_of_bad_request_error [Nethttpd_kernel]
Convert error to a string, for logging
string_of_calling_error [Netgssapi]
string_of_encoding [Netconversion]
Returns the name of the encoding.
string_of_fatal_error [Nethttpd_kernel]
Convert error to a string, for logging
string_of_fd [Netsys]
Return a string describing the descriptor (for debugging)
string_of_fd_style [Netsys]
Returns a string describing the fd style (debugging)
string_of_http_method [Netcgi_common]
Returns the string value of the method
string_of_http_status [Nethttp]
Returns the informational text for a status value
string_of_in_obj_channel [Netchannels]
Reads from the input channel until EOF and returns the characters as string.
string_of_level [Netlog]
Convert level names to strings and vice versa
string_of_major_status [Netgssapi]
string_of_output_state [Nethttpd_types]
Debugging
string_of_packed_value [Rpc_packer]
string_of_protocol [Nethttp]
Returns the string representation, e.g.
string_of_req_token [Nethttpd_kernel]
For debugging
string_of_request [Rpc_util]
Return the string representation of this call request
string_of_request_method [Netcgi_common]
string_of_response [Rpc_util]
Return the string representation of this call response
string_of_routine_error [Netgssapi]
string_of_server_error [Rpc]
returns a string for debug purposes
string_of_server_error [Netmech_scram]
string_of_sockaddr [Rpc_transport]
Convert to string, for debugging purposes
string_of_sockaddr [Netsys]
Returns a human-readable string describing the address (for debug messages)
string_of_socksymbol [Netsockaddr]
The reverse function
string_of_state [Uq_engines]
For debug purposes: Returns a string describing the state
string_of_suppl_status [Netgssapi]
string_of_url [Neturl]
Returns the URL as string
string_of_value [Rpc_util]
Return a string representation of the value which must have the passed type
string_to_mstring [Xdr_mstring]
Represent a string as mstring (no copy)
string_to_oid [Netgssapi]
Convert OID's to/from curly brace notation
string_var [Netplex_cenv]
strong_validator_match [Nethttp]
Whether the tags match strongly (see RFC 2616 for definition)
sub [Netpagebuffer]
Returns a substring
sub [Netbuffer]
sub nb k n: returns the n characters starting at position n from netbuffer nb as fresh string
sub [Netmcore_buffer]
Returns a substring
sub_lexeme [Netulex.Ulexing]
Returns a substring of the lexeme as array of Unicode code points.
subprocess_env [Netcgi_apache.Apache.Request]
request_rec subprocess_env field.
substitute_first [Netstring_pcre]
global_substitute re subst s: Applies the substitution function subst to all matchings of re in s, and returns the transformed string.
substitute_first [Netstring_str]
substitute_first re subst s: Applies the substitution function subst to the first matching of re in s, and returns the transformed string.
supported_types [Netshm]
The types supported for this OS
symlinkat [Netsys_posix]
symlinkat oldpath newdirfd newpath flags
sync_call [Rpc_client]
sync_engine [Uq_engines]
Same as function
sync_shutdown [Rpc_proxy.ManagedSet]
sync_shutdown [Rpc_proxy.ManagedClient]
sync_shutdown [Rpc_client]
Enforces a synchronous shutdown of the connection.
synchronize [Rpc_client]
Turns an async call into a synchronous call
sysconf_open_max [Netsys_posix]
Return the maximum number of open file descriptor per process.
syslog [Netsys_posix]
syslog facility level message: Logs message at level for facility
syslog_logger [Netplex_log]
Creates a logger writing to syslog
syslog_logger_factory [Netplex_log]
Reads a logging section like
system_restart [Netplex_cenv]
Initiates a system restart (like the restart method of the controller)
system_shutdown [Netplex_cenv]
Initiates a system shutdown (like the shutdown method of the controller)

T
tcgetpgrp [Netsys_posix]
Return the process group ID of the foreground process group of the session associated with the file descriptor, which must be a tty.
tcp_port [Netsmtp]
default TCP port for SMTP
tcp_port [Netpop]
Default TCP port for POP version 3
tcsetpgrp [Netsys_posix]
Sets the foreground process group ID of the session associated with the file descriptor, which must be a tty.
tempfile_transactional_optype [Netcgi1_compat.Netcgi]
tempfile_transactional_optype [Netcgi]
Deprecated name for tempfile_transactional_outtype
tempfile_transactional_outtype [Netcgi]
The output_type implementing transactions with a tempfile-based buffer
template [Netcgi_modtpl]
Compile the template from a named file.
template_from_channel [Netcgi_modtpl]
Compile the template from a channel.
template_from_string [Netcgi_modtpl]
Compile the template from a literal string.
terminate_process [Netsys_win32]
Terminates the process
test_close_on_exec [Netsys_win32]
Tests whether the handle is not inheritable
test_event [Netsys_win32]
Test whether the object is in signaled state
tests [Netmech_scram.AES_CTS]
the_request [Netcgi_apache.Apache.Request]
request_rec the_request field.
threaded_pollset [Netsys_pollset_win32]
This implementation overcomes the limit on the number of descriptors one can add to the set.
timeout_engine [Uq_engines]
Same as function
timer_create [Netsys_posix]
Create a new timer that will report expiration as given by the arg: TEXP_NONE: no notification, TEXP_EVENT e: the not_event e is signalled, TEXP_EVENT_CREATE: a special not_event is created for the timer. (Get the event via timer_event, see below.), TEXP_SIGNAL n: the signal n is sent to the process Note that TEXP_EVENT_CREATE is much faster on Linux than TEXP_EVENT, because it can be avoided to start a new thread whenever the timer expires.
timer_delete [Netsys_posix]
Deletes the timer
timer_event [Netsys_posix]
Returns the notification event for the timer styles TEXP_EVENT and TEXP_EVENT_CREATE.
timer_gettime [Netsys_posix]
Returns the number of seconds until the expiration, or (0.0,0) if the timer is off
timer_id [Netplex_cenv]
Returns an ID, e.g.
timer_settime [Netsys_posix]
timer_settime tm abstime interval value:
tmp_directory [Netsys_tmp]
Return the directory for temporary files.
tmp_prefix [Netsys_tmp]
tmp_prefix p: Enhance the prefix for temporary files by appending some digits to p.
to_buffer [Shell]
Creates a consumer writing the data into the passed buffer.
to_buffer [Shell_sys]
to_buffer b returns a function which can be used as consumer argument for add_consumer.
to_compat_activation [Netcgi1_compat.Netcgi_types]
Portage: to_compat_activation converts a new style cgi object to an old cgi_activation object.
to_compat_argument [Netcgi1_compat.Netcgi_types]
Portage: to_compat_argument a converts a new style argument a to an old style one.
to_compat_config [Netcgi1_compat.Netcgi_env]
Portage: to_compat_config c transform the new configuration c into one suitable for the old interface.
to_compat_environment [Netcgi1_compat.Netcgi_env]
Portage: to_compat_environment e converts the new environment e to the old interface.
to_dev_null [Shell]
A consumer redirecting the data to /dev/null.
to_fd [Shell]
Creates a consumer redirecting the data to the file descriptor
to_file [Shell]
Creates a consumer writing the data into the file whose name is passed to this function.
to_function [Shell]
Creates a consumer writing the data by calling a function.
to_netscape_cookie [Nethttp.Cookie]
Convert to Netscape cookie (with information loss)
to_netscape_cookie [Netcgi.Cookie]
Convert to Netscape cookie (with information loss)
to_record [Netcgi_common.Cookie]
Conversion to the deprecated style of cookie (some parameters are dropped).
to_string [Netexn]
Prints the exception as string, using the registered printer functions, or Printexc.to_string as fallback if there is no better printer
to_unicode [Netconversion]
Maps the code point of the charset to the corresponding Unicode code point, or raises Malformed_code, when the input number does not correspond to a code point.
top_c [Netmcore_queue]
pop_p q f: Takes the first element x of the queue, and calls f x, without removing x from the queue.
top_p [Netmcore_queue]
pop_p q f: Takes the first element x of the queue, and calls f x, without removing x from the queue.
track_fd [Netlog.Debug]
track_fd ~owner ~descr fd: Enters the descriptor fd into the descriptor table.
trigger_shutdown [Rpc_proxy.ManagedSet]
Shut down the managed set.
trigger_shutdown [Rpc_proxy.ManagedClient]
Shut down the managed client.
trigger_shutdown [Rpc_client]
Triggers the shutdown, and calls the passed function back when it is done.
try_shrinking [Netbuffer]
try_shrinking nb: If the length of the buffer is less than half of the allocated space, the netbuffer is reallocated in order to save memory.
tty_read_password [Netsys_posix]
tty_read_password prompt: If tty is a terminal, the prompt is printed, and a password is read from the terminal (echo off).
ttyname [Netsys_posix]
Returns the name of the controlling tty referred to by the file descriptor.

U
uarray_of_ustring [Netconversion]
Returns the characters of the string as array of Unicode code points.
uchar_at [Netconversion]
Returns the Unicode code point of the character at the cursor.
uint4_as_string [Rtypes]
uint4_as_string [Netnumber.ENCDEC]
uint4_of_int [Rtypes]
uint4_of_int [Netnumber]
uint4_of_int32 [Rtypes]
uint4_of_int32 [Netnumber]
uint4_of_int64 [Rtypes]
uint4_of_int64 [Netnumber]
uint8_as_string [Rtypes]
<t>_as_string: Returns the corresponding string in network byte order for an integer value
uint8_as_string [Netnumber.ENCDEC]
<t>_as_string: Returns the corresponding string for an integer value
uint8_of_int [Rtypes]
uint8_of_int [Netnumber]
uint8_of_int32 [Rtypes]
uint8_of_int32 [Netnumber]
uint8_of_int64 [Rtypes]
uint8_of_int64 [Netnumber]
unbind [Rpc_server]
Unbinds the program if it is bound by the server
unbound_async_call [Rpc_client.USE_CLIENT]
unbound_ssync_call client pgm proc arg emit: Invoke the remote procedure proc of the program pgm via client.
unbound_async_call [Rpc_client]
unbound_ssync_call client pgm proc arg emit: Invoke the remote procedure proc of the program pgm via client.
unbound_create [Rpc_client]
Creates an unbound client.
unbound_sync_call [Rpc_client.USE_CLIENT]
unbound_sync_call client pgm proc arg: Invoke the remote procedure proc of the program pgm via client.
unbound_sync_call [Rpc_client]
unbound_sync_call client pgm proc arg: Invoke the remote procedure proc of the program pgm via client.
undefault_url [Neturl]
Removes components from the URL if they have the passed value, and returns the modified URL.
unix_error_of_code [Netsys]
Converts an integer error into the corresponding variant
unlink_camlbox [Netcamlbox]
Removes the global name of the camlbox.
unlink_shm [Netshm]
Removes the name permanently from the system
unlinkat [Netsys_posix]
Same as Unix.unlink but unlink the file relative to the directory given by first argument
unlock [Netmappings]
unlock [Netplex_mutex]
Unlocks the mutex.
unlock [Netmcore_mutex]
Unlocks the mutex
unlockpt [Netsys_posix]
Unlock a PTY master/slave pair
unpack_call [Rpc_packer]
unpack_call_body [Rpc_packer]
unpack_call_body_raw [Rpc_packer]
unpack_call_frame [Rpc_packer]
unpack_call_frame_l [Rpc_packer]
unpack_reply [Rpc_packer]
unpack_reply_verifier [Rpc_packer]
unpack_xdr_value [Xdr]
unpack_xdr_value_l [Xdr]
prefix: whether it is ok that the string is longer than the message (default: false)
unpredictable_pipe_name [Netsys_win32]
Returns a valid pipe name that can practically not be predicted
unregister [Netsys_win32]
Removes this descriptor from the lookup table.
unsafe_buffer [Netbuffer]
Warning! This is a low-level function! Returns the current string that internally holds the buffer.
unsafe_chars_html4 [Netencoding.Html]
The string contains '<', '>', '"', '&' and the control characters 0-8, 11-12, 14-31, 127.
unset [Rpc_portmapper]
unset pm_client program_nr version_nr protocol port_nr: removes the mapping.
unset [Netcgi_apache.Apache.Table]
Table.unset tbl key delete every key/value pair associated with the key from the table tbl.
unwrap [Netplex_encap.ENCAP]
Raises Netplex_encap.Type_mismatch if the value does not fit
unwrap_wrap_token_conf [Netgssapi]
Unwraps the token using the decryption function decrypt_and_verify from the cryptosystem.
update [Rpc_program]
Modifies program and/or version number.
update_alist [Nethttpd_types]
update_alist updl l: Returns the alist with all elements of updl and all elements of l that are not member of updl.
update_props_inheader [Netcgi_common]
update_props_inheader (name, value) (props, inheader) returns (props, inheader) to which the new parameter name-value has been added -- to props or inheader, depending on name.
uri [Netcgi_apache.Apache.Request]
request_rec uri field.
uri_distributor [Nethttpd_services]
Configures URI distribution.
uripath_decode [Nethttp]
Decodes %XX sequences in URI paths.
uripath_encode [Nethttp]
Encodes unsafe characters in URI paths.
url_addr [Neturl]
If the host part of the URL is an IP address, the address is returned.
url_encode [Netencoding.Base64]
Same as encode but use slightly different characters that can be part of URLs without additional encodings.
url_fragment [Neturl]
url_host [Neturl]
url_of_string [Neturl]
Parses the passed string according to the passed url_syntax.
url_other [Neturl]
Return components of the URL.
url_param [Neturl]
url_password [Neturl]
url_path [Neturl]
url_port [Neturl]
url_provides [Neturl]
Returns true iff the URL has all of the components passed with true value.
url_query [Neturl]
url_scheme [Neturl]
url_socksymbol [Neturl]
url_socksymbol url default_port: Returns the host and port parts of the URL as socksymbol.
url_syntax_is_valid [Neturl]
Checks whether the passed url_syntax is valid.
url_syntax_of_url [Neturl]
Returns the url_syntax record of a URL.
url_user [Neturl]
url_user_param [Neturl]
use [Rpc_client.USE_CLIENT]
Announcement that this program will be used.
use [Rpc_client]
If there are no bound programs, this is a no-op.
user [Netcgi_apache.Apache.Request]
The authenticated user.
user_encoding [Netconversion]
Determines the preferred user encoding:
ustring_compare [Netconversion]
Compares two strings lexicographically.
ustring_iter [Netconversion]
Iterates over the characters of a string, and calls the passed function for every code point.
ustring_length [Netconversion]
Returns the length of the string in characters.
ustring_map [Netconversion]
Maps every character of a string to a list of characters, and returns the concatenated string.
ustring_of_uarray [Netconversion]
Returns the array of Unicode code points as encoded string.
ustring_of_uchar [Netconversion]
ustring_of_uchar enc i: Creates the string representing the Unicode code point i in encoding enc.
ustring_sub [Netconversion]
ustring_sub enc start length s: Returns the substring of s starting at character count start and consisting of length characters.
utf8_lexeme [Netulex.Ulexing]
Returns the lexeme as UTF-8 encoded string
utf8_sub_lexeme [Netulex.Ulexing]
Returns a substring of the lexeme as UTF-8 encoded string.
utf8_sub_lexeme_length [Netulex.Ulexing]
Same as String.length(utf8_sub_lexeme args), i.e.
utf8_sub_string [Netulex.ULB]
The two int arguments are the position and length of a sub string of the lexbuf that is returned as UTF8 string.
utf8_sub_string_length [Netulex.ULB]
Returns String.length(utf8_sub_string args).

V
validate_glob_expr [Netglob]
Checks whether the passed expression is syntactically valid.
validate_xdr_type [Xdr]
validate_xdr_type_system [Xdr]
value [Nethttp.Cookie]
The value of the cookie.
value [Netcgi.Cookie]
The value of the cookie.
value [Netcgi_common.Cookie]
value_area [Netsys_mem]
Marks the memory block as value area.
value_matches_type [Xdr]
Is the value properly formed with respect to this type? The third argument of this function is a list of parameter instances.
verbose [Rpc_server]
Deprecated.
verbose [Rpc_client]
set whether you want debug messages or not (same as setting Rpc_client.Debug.enable)
verify [Netconversion]
Checks whether the string is properly encoded.
verify_mic_token [Netgssapi]
Verifies the MIC token with get_mic, and returns true if the verification is successful
version_number [Rpc_program]
Return the version number

W
wait [Shell_fs]
Waits until the running command is finished
wait [Netmcore_condition]
wait we c m atomically unlocks the mutex m and suspends the calling process on the condition variable c.
wait [Netmcore_sem]
Decrements the semaphore by one.
wait_e [Netmcore_condition]
Like wait, but the suspension is done by waiting on a named pipe event (i.e.
wait_event [Netsys_posix]
If the event fd is not signalled, the function blocks until it gets signalled, even in non-blocking mode.
wait_for_enc_value [Netplex_sharedvar]
Same for encapsulated variables
wait_for_value [Netplex_sharedvar]
wait_for_value name: If the variable exists and set_value has already been called at least once, the current value is returned.
wait_until_connected [Netsys]
After a non-blocking connect has been initiated, this function can be used to wait until (1) the connect is successful, or (2) the connect fails, or (3) the operation times out.
wait_until_prird [Netsys]
Wait until an operation for a single descriptor becomes possible.
wait_until_readable [Netsys]
wait_until_writable [Netsys]
walk_method [Ftp_client]
This FTP method walks to the target directory:
watch_subprocess [Netsys_posix]
let fd, ws = watch_subprocess pid pgid kill_flag: Enters the subprocess pid into the watch list.
watchdog [Uq_engines]
Same as function
weak_once [Unixqueue]
Same as once, but the timer does not keep the event system running if it is the only remaining resource.
weak_validator_match [Nethttp]
Whether the tags match weakly (see RFC 2616 for definition)
when_state [Uq_engines]
Watches the state of the argument engine, and arranges that one of the functions is called when the corresponding state change is done.
win32_code_pages [Netconversion]
Mapping between Win32 code page numbers and Ocamlnet encodings.
win_pid [Netsys_win32]
Returns the Windows notion of the process identifier (pid)
wire_decode_token [Netgssapi]
Encode tokens as described in section 3.1 of RFC 2078.
wire_encode_token [Netgssapi]
with_in_obj_channel [Netchannels]
with_in_obj_channel ch f: Computes f ch and closes ch.
with_out_obj_channel [Netchannels]
with_out_obj_channel ch f: Computes f ch and closes ch.
with_tty [Netsys_posix]
with_tty f: Runs f fd where fd is the terminal of the process.
with_value [Netmcore_heap]
with_value h find process: Logically, this runs process (find ()) and returns the result.
with_value_2 [Netmcore_heap]
with_value_3 [Netmcore_heap]
with_value_4 [Netmcore_heap]
with_value_5 [Netmcore_heap]
Same as with_value, but a tuple of values can be passed down
with_value_n [Netmcore_heap]
Same as with_value, but a list of values can be passed down
workload_manager_factories [Netplex_workload]
All built-in workload manager factories
wrap [Netplex_encap.ENCAP]
wrap_attachment [Netsendmail]
Generates a header for the mime_body.
wrap_mail [Netsendmail]
Sets the mail-related header fields in the input message, and returns a message ready for delivery.
wrap_parts [Netsendmail]
Generates an intermediate container for multipart attachments.
write [Nethtml]
Writes the document to the output channel.
write_blocks [Netshm]
write_blocks tbl ops key f: Like read_blocks this function iterates over the blocks of all bindings for key.
write_eof_e [Uq_io]
let e = write_eof_e d: For devices supporting half-open connections, this engine writes the EOF marker and transitions to `Done true.
write_fp4 [Netnumber.ENCDEC]
write_fp8 [Netnumber.ENCDEC]
write_header [Mimestring]
This function writes the header to the passed out_obj_channel.
write_int4 [Rtypes]
write_int4 [Netnumber.ENCDEC]
write_int4_unsafe [Rtypes]
write_int4_unsafe [Netnumber.ENCDEC]
write_int8 [Rtypes]
write_int8 [Netnumber.ENCDEC]
write_int8_unsafe [Rtypes]
write_int8_unsafe [Netnumber.ENCDEC]
write_mime_message [Netmime]
Writes the MIME message to the output channel.
write_uint4 [Rtypes]
write_uint4 [Netnumber.ENCDEC]
write_uint4_unsafe [Rtypes]
write_uint4_unsafe [Netnumber.ENCDEC]
write_uint8 [Rtypes]
write_<t> copies the characters corresponding to the integer values into the string at the given positions.
write_uint8 [Netnumber.ENCDEC]
write_<t> copies the characters corresponding to the integer values into the string at the given positions.
write_uint8_unsafe [Rtypes]
write_<t>_unsafe: Same, but no index check.
write_uint8_unsafe [Netnumber.ENCDEC]
write_<t>_unsafe: Same, but no index check.
write_value [Mimestring]
Writes the list of s_token to the out_obj_channel.
wsa_enum_network_events [Netsys_win32]
Checks whether an event has been recorded
wsa_event_select [Netsys_win32]
associate event objects with socket conditions
wsa_maximum_wait_events [Netsys_win32]
max size of the array passed to wsa_wait_for_multiple_events
wsa_wait_for_multiple_events [Netsys_win32]
Waits until one of the events in the array is in signaled state, or until a timeout happens.

X
x_array_max [Xdr]
Common abbreviation for arrays of arbitrary length
x_bool [Xdr]
Common abbreviation for boolean types.
x_mstring_max [Xdr]
Common abbreviation for mstrings of arbitrary length
x_opaque_max [Xdr]
Common abbreviation for opaque data of arbitrary length
x_optional [Xdr]
Common abbreviation for optional types.
x_string_max [Xdr]
Common abbreviation for strings of arbitrary length
xdr_type_term [Xdr]
xdr_type_term_system [Xdr]
xdrt_PMAP'V2'pmapproc_callit'arg [Rpc_portmapper_aux]
xdrt_PMAP'V2'pmapproc_callit'res [Rpc_portmapper_aux]
xdrt_PMAP'V2'pmapproc_dump'arg [Rpc_portmapper_aux]
xdrt_PMAP'V2'pmapproc_dump'res [Rpc_portmapper_aux]
xdrt_PMAP'V2'pmapproc_getport'arg [Rpc_portmapper_aux]
xdrt_PMAP'V2'pmapproc_getport'res [Rpc_portmapper_aux]
xdrt_PMAP'V2'pmapproc_null'arg [Rpc_portmapper_aux]
xdrt_PMAP'V2'pmapproc_null'res [Rpc_portmapper_aux]
xdrt_PMAP'V2'pmapproc_set'arg [Rpc_portmapper_aux]
xdrt_PMAP'V2'pmapproc_set'res [Rpc_portmapper_aux]
xdrt_PMAP'V2'pmapproc_unset'arg [Rpc_portmapper_aux]
xdrt_PMAP'V2'pmapproc_unset'res [Rpc_portmapper_aux]
xdrt_call_args [Rpc_portmapper_aux]
xdrt_call_result [Rpc_portmapper_aux]
xdrt_mapping [Rpc_portmapper_aux]
xdrt_pmaplist [Rpc_portmapper_aux]
xdrt_pmaplist_p [Rpc_portmapper_aux]
xmap_list [Nethtml]
xmap_list f surrounding_element_opt doclst: Similar to map_list, the function f is applied to all attribute values and data strings.
xor_s [Netauth]
Performs the bitwise XOR of these strings (which must have the same length)
xv_false [Xdr]
See x_bool
xv_none [Xdr]
xv_some [Xdr]
See x_optional
xv_true [Xdr]

Z
zero_pages [Netsys_mem]
zero_pages m pos len: If possible, the memory pages in the range pos to pos+len-1 of m are allocated again, so that they replace the previous pages.

This web site is published by Informatikbüro Gerd Stolpmann
Powered by Caml